EN ISO 9693-2:2016

Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO 9693-2:2016)

ISO 9693-2:2016 specifies requirements and test methods to assess the compatibility of ceramic-ceramic materials used for dental restorations by testing composite structures.
The requirements of this part of ISO 9693 apply when different ceramic components are used in combination. Compliance cannot be claimed for either ceramic alone.
For requirements of ceramic materials, see ISO 6872.

Zahnheilkunde - Kompatibilitätsprüfung - Teil 2: Keramik-Keramiksysteme (ISO 9693-2:2016)

Dieser Teil von ISO 9693 legt Anforderungen und Prüfverfahren fest für die Beurteilung der Kompatibilität von Keramik-Keramikwerkstoffen, die zur Herstellung von Restaurationen in der Zahnheilkunde verwendet werden, indem die Verbundstrukturen geprüft werden.
Die Anforderungen in diesem Teil von ISO 9693 gelten, wenn verschiedene Keramikkomponenten in einer Kombination verwendet werden. Die Erfüllung der Anforderungen darf nicht für eine Keramik allein beansprucht werden.
Für Anforderungen an keramische Werkstoffe siehe ISO 6872.

Médecine bucco-dentaire - Essais de compatibilité - Partie 2: Systèmes céramo-céramiques (ISO 9693-2:2016)

ISO 9693:2016 spécifie des exigences et des méthodes d'essai qui permettent d'évaluer, au moyen d'essais sur des structures composites, la compatibilité des matériaux constitutifs des systèmes céramo-céramiques utilisés pour des restaurations dentaires.
Les exigences spécifiées dans la présente partie de l'ISO 9693 s'appliquent lorsque différents constituants céramiques sont combinés. La conformité ne peut pas être déclarée pour tout constituant céramique utilisé seul.
Pour obtenir les exigences relatives aux matériaux céramiques, voir l'ISO 6872.

Zobozdravstvo - Preskušanje združljivosti - 2. del: Keramično-keramični sistemi (ISO 9693-2:2016)

Ta mednarodni standard določa preskusne metode za oceno združljivosti kovinskih in keramičnih materialov, ki se uporabljajo za popravila zob, s preskušanjem njihove kompozitne strukture.
Zahteve tega mednarodnega standarda se uporabljajo, ko se uporablja kombinacija dveh različnih keramičnih sestavnih delov, pri čemer ni mogoče zagotoviti skladnosti za vsak keramični del posebej.

General Information

• Status: Withdrawn
• Publication Date: 15-Mar-2016
• Withdrawal Date: 19-Nov-2019
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Nov-2019
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Ref Project: SIST EN ISO 9693-2:2016 - Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO 9693-2:2016)

Relations

• Replaces: EN ISO 9693:2000 - Metal-ceramic dental restorative systems (ISO 9693:1999)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 9693:2019 - Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2019)
• Effective Date: 29-Aug-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9693-2:2016
01-maj-2016
1DGRPHãþD
SIST EN ISO 9693:2001
=RER]GUDYVWYR3UHVNXãDQMH]GUXåOMLYRVWLGHO.HUDPLþQRNHUDPLþQLVLVWHPL
,62
Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO 9693-2:2016)
Zahnheilkunde - Verbundprüfung - Teil 2: Keramik-Keramiksysteme (ISO 9693-2:2016)
Médecine bucco-dentaire - Essais de compatibilité - Partie 2: Systèmes céramiques-
céramiques (ISO 9693-2:2016)
Ta slovenski standard je istoveten z: EN ISO 9693-2:2016
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 9693-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9693-2:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 9693-2:2016


EN ISO 9693-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2016
EUROPÄISCHE NORM
ICS 11.060.10 Supersedes EN ISO 9693:2000
English Version

Dentistry - Compatibility testing - Part 2: Ceramic-ceramic
systems (ISO 9693-2:2016)
Médecine bucco-dentaire - Essais de compatibilité - Zahnheilkunde - Verbundprüfung - Teil 2: Keramik-
Partie 2: Systèmes céramo-céramiques (ISO 9693- Keramiksysteme (ISO 9693-2:2016)
2:2016)
This European Standard was approved by CEN on 13 December 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9693-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9693-2:2016
EN ISO 9693-2:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9693-2:2016
EN ISO 9693-2:2016 (E)
European foreword
This document (EN ISO 9693-2:2016) has been prepared by Technical Committee
ISO/TC 106 “Dentistry” in collaboration with Technical Committee CEN/TC 55 “Dentistry” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 9693:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9693-2:2016 has been approved by CEN as EN ISO 9693-2:2016 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 9693-2:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 9693-2:2016
INTERNATIONAL ISO
STANDARD 9693-2
First edition
2016-02-15
Dentistry — Compatibility testing —
Part 2:
Ceramic-ceramic systems
Médecine bucco-dentaire — Essais de compatibilité —
Partie 2: Systèmes céramo-céramiques
Reference number
ISO
...