EN 1628:2021
(Main)Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
This document specifies a test method for the determination of resistance to static loading in order to assess the burglar resistant properties of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following opening functions: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically), projecting, and rolling as well as non-openable constructions.
It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. This test method does not evaluate the performance of the fixing to the building.
The manufacturer's installation instructions will give guidance on the fixing of the product.
An example for the contents of the manufacturer’s installation instructions is given in EN 1627:2021, Annex A.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241:2003+A2:2016.
NOTE It is important that construction products that can be reached or driven through by vehicles are protected by appropriate measures such as barriers, extensible ramps, etc.
Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung - Prüfverfahren für die Ermittlung der Widerstandsfähigkeit unter statischer Belastung
Dieses Dokument legt ein Prüfverfahren zur Ermittlung der Widerstandsfähigkeit unter statischer Belastung fest, um die einbruchhemmenden Eigenschaften von Türelementen, Fenstern, Vorhangfassaden, Schutzgittern und Abschlüssen zu bewerten. Es gilt für die folgenden Öffnungsfunktionen: Drehen, Kippen, Falten, Drehkippen, Hoch- oder Herunterklappen, Schieben (horizontal und vertikal), Schwingen (horizontal und vertikal), Überstand und Rollen sowie für nicht öffenbare Konstruktionen.
Es werden zwei Aspekte der einbruchhemmenden Leistungsfähigkeit von Bauprodukten zugrunde gelegt, ihr üblicher Widerstand gegen gewaltsame Öffnung und die Fähigkeit, im Gebäude fest verankert zu bleiben. Das vorliegende Prüfverfahren bewertet nicht die Ausführung der Befestigung am Gebäude.
Leitlinien zur Befestigung des Produkts sind der Einbauanweisung des Herstellers zu entnehmen.
EN 1627:2021, Anhang A enthält ein Beispiel für den Inhalt der Einbauanweisung des Herstellers.
Dieses Dokument gilt nicht für Wände und Dächer sowie für Türen, Tore und Schranken, die für den Einbau in Bereichen für den Zugang von Personen dienen und die hauptsächlich für einen sicheren Zugang für Güter und von Personen geführten Fahrzeugen in industriellen, gewerblichen und Wohnbereichen gedacht sind, welche in den Anwendungsbereich von EN 13241:2003+A2:2016 fallen.
ANMERKUNG Es ist wichtig, dass Bauprodukte, die durch Kraftfahrzeuge erreicht oder durchfahren werden können, durch geeignete Maßnahmen, wie Sperren, ausfahrbare Rampen usw., geschützt werden.
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à l'effraction - Méthode d'essai pour la détermination de la résistance à la charge statique
Le présent document définit une méthode d’essai pour déterminer la résistance à la charge statique dans le but d’évaluer les caractéristiques de résistance à l’effraction des blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures. Il s’applique aux modes d’ouverture suivants : battant, oscillant, pliant, oscillo-battant, à gonds haut ou bas, coulissant (horizontalement et verticalement), pivotant (horizontalement et verticalement), à projection et à enroulement ainsi que constructions non ouvrables.
Il est reconnu que les performances de résistance à l’effraction des produits de construction se caractérisent par deux aspects : leur résistance normale à une ouverture en force et leur capacité à rester fixé au bâtiment. Cette méthode d’essai n’évalue pas les performances de la fixation au bâtiment.
Les instructions de pose du fabricant donnent des recommandations relatives à la fixation du produit.
Un exemple du contenu des instructions de pose du fabricant est donné dans l’EN 1627:2021, Annexe A.
Le présent document ne s’applique pas aux murs et toitures, ni aux portes, portails et barrières, destinés à être installés dans des zones accessibles aux personnes et dont l’utilisation principale prévue est de permettre l’accès sécurisé de marchandises et de véhicules accompagnés ou conduits par des personnes, dans des locaux industriels et commerciaux ou des garages dans les zones d’habitation, tel que traité par l’EN 13241:2003+A2:2016.
NOTE Il est important que les produits de construction qui sont accessibles ou peuvent être empruntés par des véhicules, soient protégés par des moyens appropriés tels que barrières, rampes déployables, etc.
Vrata, okna, obešene fasade, mreže in polkna - Protivlomna odpornost - Preskusna metoda za ugotavljanje odpornosti proti statičnim obremenitvam
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN 1628:2012+A1:2016
Vrata, okna, obešene fasade, mreže in polkna - Protivlomna odpornost - Preskusna
metoda za ugotavljanje odpornosti proti statičnim obremenitvam
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance -
Test method for the determination of resistance under static loading
Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung -
Prüfverfahren für die Ermittlung der Widerstandsfähigkeit unter statischer Belastung
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à
l'effraction - Méthode d'essai pour la détermination de la résistance à la charge statique
Ta slovenski standard je istoveten z: EN 1628:2021
ICS:
13.310 Varstvo pred kriminalom Protection against crime
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 1628
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 13.310; 91.060.50 Supersedes EN 1628:2011+A1:2015
English Version
Pedestrian doorsets, windows, curtain walling, grilles and
shutters - Burglar resistance - Test method for the
determination of resistance under static loading
Blocs-portes pour piétons, fenêtres, façades rideaux, Türen, Fenster, Vorhangfassaden, Gitterelemente und
grilles et fermetures - Résistance à l'effraction - Abschlüsse - Einbruchhemmung - Prüfverfahren für die
Méthode d'essai pour la détermination de la résistance Ermittlung der Widerstandsfähigkeit unter statischer
à la charge statique Belastung
This European Standard was approved by CEN on 19 March 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1628:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Apparatus . 6
4.1 Test rig . 6
4.2 Load applicators . 6
4.3 Hooks . 6
4.4 Straps. 6
4.5 Pressure pads . 6
4.6 Measuring equipment . 6
4.7 Sub-frame . 7
4.8 Tolerances . 7
5 Test specimen . 7
5.1 General. 7
5.2 Preparation and examination of the test specimen . 8
6 Procedure . 9
6.1 Test room climate . 9
6.2 General. 9
6.3 Testing of group 1 and group 2 construction products . 9
6.3.1 Loading points for group 1 and group 2 products . 9
6.3.2 Test procedure for the infill medium retention system (product groups 1 and 2) . 11
6.3.3 Test procedure for the leaf (product group 1, burglar resistance class 1) . 11
6.3.4 Test procedure for the leaf (product group 1, burglar resistance classes 2 and
higher) . 11
6.3.5 Test procedure for the leaf (product group 2, burglar resistance class 1) . 11
6.3.6 Test procedure for the leaf (product group 2, burglar resistance classes 2 and
higher) . 12
6.4 Failure criteria for product groups 1 and 2. 12
6.5 Testing of group 3 construction products . 13
6.5.1 Loading points . 13
6.5.2 Loading direction . 13
6.5.3 Loading and measurement procedure . 13
6.5.4 Failure criteria for product group 3 . 14
6.6 Testing of group 4 construction products . 14
6.6.1 General. 14
6.6.2 Resistance of moving elements . 15
6.6.3 Resistance of other loading points . 15
6.6.4 Failure criteria for product group 4 . 15
7 Test report . 15
Annex A (normative) Test equipment . 17
Annex B (normative) Test sequence for static loading test in resistance classes 1 to 6 . 84
Annex C (normative) Dislocation of window hardware against the locking direction . 85
Bibliography . 88
European foreword
This document (EN 1628:2021) has been prepared by Technical Committee CEN/TC 33 “Doors, windows,
shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document will supersede EN 1628:2011+A1:2015.
Significant changes in this revision are:
a) Updated editions of Normative References;
b) Gap gauge C in Figure A.14 replaced gauge 3 in Figure A.13.
This European Standard is one of a series of standards for burglar resistant pedestrian doorsets,
windows, curtain walling, grilles and shutters. The other standards in the series are:
— EN 1627:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar
resistance — Requirements and classification;
— EN 1629:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar
resistance — Test method for the determination of resistance under dynamic loading;
— EN 1630:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar
resistance — Test method for the determination of resistance to manual burglary attempts.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document specifies a test method for the determination of resistance to static loading in order to
assess the burglar resistant properties of pedestrian doorsets, windows, curtain walling, grilles and
shutters. It is applicable to the following opening functions: Turning, tilting, folding, turn-tilting, top or
bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically), projecting, and
rolling as well as non-openable constructions.
It is acknowledged that there are two aspects to the burglar resistance performance of construction
products, their normal resistance to forced operation and their ability to remain fixed to the building.
This test method does not evaluate the performance of the fixing to the building.
The manufacturer's installation instructions will give guidance on the fixing of the product.
An example for the contents of the manufacturer’s installation instructions is given in EN 1627:2021,
Annex A.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for
installation in areas in the reach of persons, and for which the main intended uses are giving safe access
for goods and vehicles accompanied or driven by persons in industrial, commercial or residential
premises, as covered by EN 13241:2003+A2:2016.
NOTE It is important that construction products that can be reached or driven through by vehicles are
protected by appropriate measures such as barriers, extensible ramps, etc.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 356:1999, Glass in building — Security glazing — Testing and classification of resistance against
manual attack
EN 1627:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar resistance —
Requirements and classification
EN 1629:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar resistance —
Test method for the determination of resistance under dynamic loading
EN 1630:2021, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar resistance —
Test method for the determination of resistance to manual burglary attempts
EN 12195-2:2000, Load restraint assemblies on road vehicles — Safety — Part 2: Web lashing made from
man-made fibres
EN 12216:2018, Shutters, external blinds, internal blinds — Terminology, glossary and definitions
EN 12519:2018, Windows and pedestrian doors — Terminology
EN 13119:2016, Curtain walling — Terminology
EN 13241:2003+A2:2016, Industrial, commercial, garage doors and gates — Product standard,
performance characteristics
SIST EN 1628:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.