Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems

This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section used in hydraulic and pneumatic power systems.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness.
The allowed pressure rates and upper temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards. Concerning the lower temperature range applicability the impact energy requirements are given at 0 °C.
NOTE   Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre für Hydraulik- und Pneumatik-Druckleitungen

Diese Europäische Norm legt die technischen Lieferbedingungen für nahtlose kaltgezogene Präzisionsrohre aus Stahl mit kreisförmigem Querschnitt für die Anwendung in hydraulischen und pneumatischen Druck-leitungssystemen fest.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte maximale Oberflächenrauheit charakterisiert.
Die Beachtung der zulässigen Druckbeaufschlagung und Höchsttemperaturen nach dem Stand der Technik und unter Anwendung der in den entsprechenden Vorschriften, Regelwerken oder Normen festgelegten Sicherheitskoeffizienten liegt in der Verantwortung des Anwenders. Für die Anwendungen im unteren Temperaturbereich wurden Anforderungen an die Kerbschlagarbeit bei 0 °C festgelegt.
ANMERKUNG   Nach Veröffentlichung dieser Norm im EU Amtsblatt (OJEU) unter der Richtlinie 97/23/EG ist die Annahme ihrer Konformität mit den grundlegenden Anforderungen (ESR) der Richtlinie 97/23/EG auf die technischen Daten von Werkstoffen in dieser Europäischen Norm beschränkt, und es darf nicht angenommen werden, dass damit die Eignung des Werkstoffs für ein bestimmtes Ausrüstungsteil festgestellt ist. Folglich müssen die in dieser Werkstoffnorm angegebenen technischen Parameter im Hinblick auf die konstruktiven Anforderungen dieses bestimmten Ausrüstungs¬teils ermittelt werden, um damit zu verifizieren, dass den ESR der Richtlinie 97/23/EG entsprochen wird.

Tubes de précision en acier - Conditions techniques de livraison - Partie 4 : Tubes sans soudure étirés à froid pour circuits hydrauliques et pneumatiques

La présente partie de l'EN 10305 spécifie les conditions techniques de livraison pour les tubes sans soudure en acier, étirés à froid, de section circulaire, utilisés dans les circuits hydrauliques et pneumatiques.
Les tubes conformes à la présente partie de l'EN 10305 se caractérisent par des tolérances dimensionnelles précises et par une rugosité maximale spécifiée.
Les taux de pression et les températures autorisés relèvent de la responsabilité du client conformément aux règles de l'art et en application des coefficients de sécurité spécifiés dans les réglementations, codes ou normes applicables. En ce qui concerne l’application dans les plages de températures basses, les exigences d’énergie de rupture en flexion par choc sont données à 0° C.
NOTE   Lorsque cette norme sera publiée dans le Journal Officiel de l’Union Européenne (JOUE) sous la Directive 2014/68/UE , la présomption de conformité aux exigences essentielles de sécurité (EES) de la directive 2014/68/UE  est limitée aux données techniques concernant les matériaux, et ne présume pas de l’adéquation du matériau avec un item particulier de l’équipement. En conséquence, la vérification des données techniques figurant dans la norme au regard des exigences de conception applicables à ce composant particulier de l’équipement, pour vérifier que les EES de la Directive Equipements sous Pression, doit être faite.

Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 4. del: Hladno vlečene nevarjene cevi za hidravlične in pnevmatične tlačne vode

Ta evropski standard določa tehnične dobavne pogoje za hladno vlečene nevarjene cevi s krožnim prečnim prerezom za hidravlične in pnevmatične tlačne vode.
Cevi v skladu s tem dokumentom imajo natančno opredeljene tolerance za mere in določeno največjo površinsko hrapavost.
Za dovoljene ravni tlaka in najvišje temperature je odgovorna stranka v skladu s stanjem tehnike in ob uporabi varnostnih koeficientov, določenih v veljavnih predpisih, kodeksih ali standardih. Kar zadeva ustreznost razpona nižjih temperatur, so zahteve glede udarne moči podane pri 0° C.
OPOMBA:   Ko bo ta standard objavljen v Uradnem listu Evropske unije (OJEU) v okviru Direktive 97/23/ES, bodo zagotovila o skladnosti z osnovnimi varnostnimi zahtevami (ESR) Direktive 97/23/ES omejena na tehnične podatke o materialih, navedene v tem evropskem standardu, standard pa ne bo zagotavljal ustreznosti materiala za določen element opreme. Zato bo potrebno oceniti tehnične podatke, podane v tem standardu za materiale, glede na zahteve zasnove določenega elementa opreme, da se zagotovi, da so izpolnjene osnovne varnostne zahteve Direktive o tlačni opremi.

General Information

Status
Published
Publication Date
29-Mar-2016
Withdrawal Date
29-Sep-2016
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Sep-2021
Completion Date
02-Sep-2021

Relations

Buy Standard

Standard
EN 10305-4:2016
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 10305-4:2015
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre für Hydraulik- und Pneumatik-DruckleitungenTubes de précision en acier - Conditions techniques de livraison - Partie 4 : Tubes sans soudure étirés à froid pour circuits hydrauliques et pneumatiquesSteel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-4:2016SIST EN 10305-4:2016en,fr,de01-oktober-2016SIST EN 10305-4:2016SLOVENSKI
STANDARDSIST EN 10305-4:20111DGRPHãþD



SIST EN 10305-4:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-4
March
t r s x ICS
y yä s v rä y w Supersedes EN
s r u r wæ vã t r s sEnglish Version
Steel tubes for precision applications æ Technical delivery conditions æ Part
vã Seamless cold drawn tubes for hydraulic and pneumatic power systems Tubes de précision en acier æ Conditions techniques de livraison æ Partie
v ã Tubes sans soudure étirés à froid pour circuits hydrauliques et pneumatiques
Präzisionsstahlrohre æ Technische Lieferbedingungen æTeil
vã Nahtlose kaltgezogene Rohre für Hydraulikæ und PneumatikæDruckleitungen This European Standard was approved by CEN on
s z January
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u r wæ vã t r s x ESIST EN 10305-4:2016



EN 10305-4:2016 (E) 2 Contents Page European foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Symbols . 7 5 Classification and designation . 7 5.1 Classification . 7 5.2 Designation. 7 6 Information to be supplied by the purchaser . 7 6.1 Mandatory information . 7 6.2 Options . 7 6.3 Example of an order . 8 7 Manufacturing process . 8 7.1 Steelmaking process .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre für Hydraulik- und Pneumatik-DruckleitungenTubes de précision en acier - Conditions techniques de livraison - Partie 4 : Tubes sans soudure étirés à froid pour circuits hydrauliques et pneumatiquesSteel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:FprEN 10305-4 revkSIST FprEN 10305-4:2015en,fr,de01-oktober-2015kSIST FprEN 10305-4:2015SLOVENSKI
STANDARD



kSIST FprEN 10305-4:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 10305-4
July 2015 ICS 77.140.75 Will supersede EN 10305-4:2011English Version
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
Tubes de précision en acier - Conditions techniques de livraison - Partie 4 : Tubes sans soudure étirés à froid pour circuits hydrauliques et pneumatiques
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre für Hydraulik- und Pneumatik-Druckleitungen This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee ECISS/TC 110.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 10305-4:2015 EkSIST FprEN 10305-4:2015



FprEN 10305-4:2015 (E) 2 Contents Page Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Symbols .6 5 Classification and designation .7 5.1 Classification .7 5.2 Designation .7 6 Information to be supplied by the purchaser .7 6.1 Mandatory information .7 6.2 Options .7 6.3 Example of an order .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.