Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2018)

This document specifies a series of methods for the determination of peel adhesion properties of self adhesives tapes.
This document contains:
—          Method 1: Self adhesive tapes ? Measurement of peel adhesion from stainless steel at an angle of 180°;
—          Method 2: Self adhesive tapes ? Measurement of peel adhesion from its own backing at an angle of 180°;
—          Method 3: Self adhesive tapes ? Measurement of peel adhesion of double sided and transfer tapes at an angle 180°;
—          Method 4: Self adhesive tapes ? Measurement of adhesion of the liner to an adhesive tape at an angle of 180°.
Annexes A and B specify further variations in the testing protocol according to specific conditions.

Klebebänder - Bestimmung der Klebkraft (ISO 29862:2018)

Dieses Dokument legt eine Reihe von Verfahren zur Bestimmung der Klebkraft von Klebebändern fest.
Dieses Dokument legt fest:
   Verfahren 1: Klebebänder — Messung der Klebkraft auf nicht rostendem Stahl unter einem Winkel von 180°;
   Verfahren 2: Klebebänder — Messung der Klebkraft auf der eigenen Rückseite unter einem Winkel von 180°;
   Verfahren 3: Klebebänder — Messung der Klebkraft auf doppelseitig beschichteten und übertragbaren Klebebändern unter einem Winkel von 180°;
   Verfahren 4: Klebebänder — Messung der Klebkraft des Trennmaterials auf Klebeband unter einem Winkel von 180°.
Anhang A und Anhang B legen weitere, den spezifischen Bedingungen entsprechende Änderungen des Prüfprotokolls fest.
Eine Richtlinie dafür, wann welches der angegebenen Verfahren anzuwenden ist, wird in Tabelle 1 angegeben.

Rubans auto-adhésifs - Détermination des caractéristiques du pouvoir adhésif linéaire (ISO 29862:2018)

Le présent document spécifie des méthodes d'essai permettant de déterminer les caractéristiques du pouvoir adhésif linéaire des rubans auto-adhésifs.
Le présent document se compose de:
—          la méthode 1: Rubans auto-adhésifs ? Mesure du pouvoir adhésif linéaire sur l'acier inoxydable à un angle de 180°;
—          la méthode 2: Rubans auto-adhésifs ? Mesure du pouvoir adhésif linéaire sur son propre support à un angle de 180°;
—          la méthode 3: Rubans auto-adhésifs ? Mesure du pouvoir adhésif linéaire des rubans double face et transfert à un angle de 180°;
—          la méthode 4: Rubans auto-adhésifs ? Mesure du pouvoir adhésif du protecteur anti-adhérent du ruban adhésif à un angle de 180°.
Les Annexes A et B spécifient des variantes du protocole d'essai en fonction de certaines conditions spécifiques.

Samolepilni trakovi - Določevanje lastnosti prilepljivosti (ISO 29862:2018)

Ta dokument določa nabor metod za določanje lastnosti prilepljivosti samolepilnih trakov.
Ta dokument zajema naslednje metode:
– 1. metoda: Samolepilni trakovi ? Merjenje prilepljivosti na nerjavečem jeklu pod kotom 180°;
– 2. metoda: Samolepilni trakovi ? Merjenje prilepljivosti na lastni podlagi pod kotom 180°;
– 3. metoda: Samolepilni trakovi ? Merjenje prilepljivosti dvostranskih in prenosnih trakov pod kotom 180°;
– 4. metoda: Samolepilni trakovi ? Merjenje oprijema obloge na lepilni trak pod kotom 180°.
V prilogah A in B so navedene nadaljnje različice protokola za preskušanje glede na posebne pogoje.

General Information

Status
Published
Publication Date
04-Jun-2019
Withdrawal Date
30-Dec-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
05-Jun-2019
Due Date
20-Jan-2021
Completion Date
05-Jun-2019

Relations

Buy Standard

Standard
EN ISO 29862:2019
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2019
Nadomešča:
SIST EN 1939:2003
Samolepilni trakovi - Določevanje lastnosti prilepljivosti (ISO 29862:2018)
Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2018)
Klebebänder - Bestimmung der Klebkraft (ISO 29862:2018)
Rubans auto-adhésifs - Détermination des caractéristiques du pouvoir adhésif linéaire
(ISO 29862:2018)
Ta slovenski standard je istoveten z: EN ISO 29862:2019
ICS:
83.180 Lepila Adhesives
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 29862
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN 1939:2003
English Version
Self adhesive tapes - Determination of peel adhesion
properties (ISO 29862:2018)
Rubans auto-adhésifs - Détermination des Klebebänder - Bestimmung der Klebkraft (ISO
caractéristiques du pouvoir adhésif linéaire (ISO 29862:2018)
29862:2018)
This European Standard was approved by CEN on 8 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29862:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 29862:2018 has been prepared by Technical Committee ISO/TC 61 "Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 29862:2019 by
Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1939:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 29862:2018 has been approved by CEN as EN ISO 29862:2019 without any modification.

INTERNATIONAL ISO
STANDARD 29862
Second edition
2018-05
Self adhesive tapes — Determination
of peel adhesion properties
Rubans auto-adhésifs — Détermination des caractéristiques du
pouvoir adhésif linéaire
Reference number
ISO 29862:2018(E)
©
ISO 2018
ISO 29862:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 29862:2018(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Significance and use . 2
5 Method 1 — Self adhesive tapes — Measurement of peel adhesion from stainless
steel at an angle of 180° . 3
5.1 Principle . 3
5.2 Materials . 3
5.3 Apparatus . 3
5.4 Test samples and test pieces . 4
5.5 Procedure . 5
5.5.1 Standard test conditions . 5
5.5.2 Preparation of the panel . 5
5.5.3 Peel adhesion . 5
5.6 Expression of results . 5
5.7 Test report . 5
6 Method 2 — Self adhesive tapes — Measurement of peel adhesion from its own
backing at an angle of 180° . 6
6.1 Principle . 6
6.2 Apparatus . 6
6.3 Test samples and test pieces . 6
6.4 Procedure . 7
6.4.1 Standard test conditions . 7
6.4.2 Preparation of the panel . 7
6.5 Expression of results . 7
6.6 Test report . 7
7 Method 3 — Self adhesive tapes — Measurement of peel adhesion of double sided
and transfer tapes at an angle of 180° . 7
7.1 Principle . 7
7.2 Materials . 7
7.3 Apparatus . 7
7.4 Test samples and test pieces . 7
7.5 Procedure . 8
7.5.1 Standard test conditions . 8
7.5.2 Preparation of the panel . 8
7.5.3 Procedure for open side of double sided or adhesive transfer tape . 8
7.5.4 Procedure for closed side of double sided or adhesive transfer tape . 8
7.6 Expression of results . 8
7.7 Test report . 8
8 Method 4 — Self adhesive tapes — Measurement of adhesion of the liner to an
adhesive tape at an angle of 180° . 9
8.1 Principle . 9
8.1.1 Double sided adhesive tapes . 9
8.1.2 Single sided adhesive tapes . 9
8.2 Materials . 9
8.3 Apparatus . 9
8.4 Test samples and test pieces . 9
8.5 Procedure .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.