EN ISO 11125-9:2022

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021)

This document specifies three procedures to test the service life of a blast-cleaning abrasive under laboratory conditions.
The performance of an abrasive is also measured by its ability to clean, via transmission of kinetic energy to the substrate in the blasting process. This document also specifies the procedures that can be performed in the same testing machines to help evaluate abrasive performance under laboratory conditions.
This document applies to the testing of virgin metallic blasting media in the delivery state by centrifugal blasting under laboratory conditions.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für metallische Strahlmittel - Teil 9: Verschleißprüfung und Leistungsfähigkeit (ISO 11125-9:2021)

Dieses Dokument legt drei Verfahren zur Prüfung der Lebensdauer von Strahlmitteln unter Labor-bedingungen festgelegt.
Die Leistung eines Strahlmittels wird auch durch seine Fähigkeit bestimmt, die Oberfläche während des Strahlverfahrens durch Übertragung von kinetischer Energie zu reinigen. Außerdem werden in diesem Dokument die Verfahren festgelegt, die in den gleichen Prüfmaschinen durchgeführt werden können, um die Strahlmittelleistung unter Laborbedingungen besser bewerten zu können.
Dieses Dokument ist anwendbar für die Prüfung von ungebrauchten metallischen Strahlmitteln im Auslieferungszustand durch Zentrifugalstrahlen unter Laborbedingungen.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 9: Essais d'usure et performances (ISO 11125-9:2021)

Le présent document spécifie trois modes opératoires pour évaluer la durée de vie d’un abrasif destiné à la préparation par projection dans des conditions de laboratoire.
Les performances d’un abrasif sont également mesurées par son aptitude à décaper, via une transmission de l’énergie cinétique au subjectile au cours du processus de projection. Le présent document spécifie également les modes opératoires qui peuvent être réalisés sur les mêmes machines d’essai pour aider à évaluer les performances d’un abrasif dans des conditions de laboratoire.
Le présent document s’applique à l’essai d’abrasifs métalliques fournis à l’état «neuf» par projection par force centrifuge dans des conditions de laboratoire.

Priprava jeklenih podlag pred nanašanjem barv in sorodnih premazov - Preskusne metode za kovinske granulate za peskanje - 9. del: Preskušanje obrabe in lastnosti (ISO 11125-9:2021)

Ta dokument se uporablja za preskušanje neobdelanih kovinskih materialov za peskanje v dobavljenem stanju s centrifugalnim peskanjem v laboratorijskih pogojih. Na splošno se preverja učinek obrabe in poraba. Za določene preskusne postopke je morda potrebna posebna priprava. Rezultati se lahko uporabijo za primerjavo (pregled kakovosti) ali za nadzorovanje (nadzor kakovosti) dobave glede enotnosti.

General Information

• Status: Published
• Publication Date: 21-Jun-2022
• Withdrawal Date: 30-Dec-2022
• ICS: 25.220.10 - Surface preparation
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Jun-2022
• Due Date: 31-Mar-2024
• Completion Date: 22-Jun-2022
• Ref Project: SIST EN ISO 11125-9:2022 - Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11125-9:2022
01-september-2022
Priprava jeklenih podlag pred nanašanjem barv in sorodnih premazov - Preskusne
metode za kovinske granulate za peskanje - 9. del: Preskušanje obrabe in lastnosti
(ISO 11125-9:2021)
Preparation of steel substrates before application of paints and related products - Test
methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance
(ISO 11125-9:2021)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für metallische Strahlmittel - Teil 9: Verschleißprüfung und
Leistungsfähigkeit (ISO 11125-9:2021)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par
projection - Partie 9: Titre manque (ISO 11125-9:2021)
Ta slovenski standard je istoveten z: EN ISO 11125-9:2022
ICS:
25.220.10 Priprava površine Surface preparation
87.020 Postopki za nanašanje Paint coating processes
barvnih premazov
SIST EN ISO 11125-9:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11125-9:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 11125-9:2022


EN ISO 11125-9
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2022
EUROPÄISCHE NORM
ICS 25.220.10
English Version

Preparation of steel substrates before application of paints
and related products - Test methods for metallic blast-
cleaning abrasives - Part 9: Wear testing and performance
(ISO 11125-9:2021)
Préparation des subjectiles d'acier avant application de Vorbereitung von Stahloberflächen vor dem Auftragen
peintures et de produits assimilés - Méthodes d'essai von Beschichtungsstoffen - Prüfverfahren für
pour abrasifs métalliques destinés à la préparation par metallische Strahlmittel - Teil 9: Verschleißprüfung
projection - Partie 9: Titre manque (ISO 11125-9:2021) und Leistungsfähigkeit (ISO 11125-9:2021)
This European Standard was approved by CEN on 20 June 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11125-9:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11125-9:2022
EN ISO 11125-9:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11125-9:2022
EN ISO 11125-9:2022 (E)
European foreword
The text of ISO 11125-9:2021 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 11125-9:2022 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2022, and conflicting national standards
shall be withdrawn at the latest by December 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the nat
...