EN 10244-5:2001

Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings

This part of this European Standard specifies the requirements for mass, other properties and testing of nickel coatings on steel wire and steel wire products of round or other cross-section.

Stahldraht und Drahterzeugnisse - Überzüge aus Nichteisenmetall auf Stahldraht - Teil 5: Überzüge aus Nickel

Dieser Teil dieser Europäischen Norm legt die Anforderungen an Masse, andere Eigenschaften und Prüfung von Überzügen aus Nickel auf Stahldraht und Stahldrahterzeugnissen mit rundem oder anderem Querschnitt fest.

Fils et produits tréfilés en acier - Revêtements métalliques non ferreux sur fils d'acier - Partie 5: Revêtements de nickel

Domaine d'application
La présente partie de la présente norme européenne spécifie les exigences en matière de masse, des autres applications et d'essai de revêtements de nickel sur fils en acier et produits dérivés de section circulaire ou autre.

Jeklena žica in žični izdelki - Neželezne kovinske prevleke na jekleni žici - 5. del: Nikljeve prevleke

General Information

• Status: Published
• Publication Date: 20-Mar-2001
• Withdrawal Date: 29-Sep-2001
• ICS: 25.220.40 - Metallic coatings
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: ECISS/TC 106 - Wire rod and wires
• Drafting Committee: ECISS/TC 30/SC 1 - Wire coatings
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 04-Mar-2020
• Ref Project: SIST EN 10244-5:2002 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Überzüge aus Nichteisenmetall auf Stahldraht - Teil 5: Überzüge aus NickelFils et produits tréfilés en acier - Revetements métalliques non ferreux sur fils d'acier - Partie 5: Revetements de nickelSteel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.40Kovinske prevlekeMetallic coatingsICS:Ta slovenski standard je istoveten z:EN 10244-5:2001SIST EN 10244-5:2002en01-september-2002SIST EN 10244-5:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10244-5March 2001ICS 25.220.40English versionSteel wire and wire products - Non-ferrous metallic coatings onsteel wire - Part 5: Nickel coatingsFils et produits tréfilés en acier - Revêtements métalliquesnon ferreux sur fils d'acier - Partie 5: Revêtements de nickelStahldraht und Drahterzeugnisse - Überzüge ausNichteisenmetall auf Stahldraht - Teil 5: Überzüge ausNickelThis European Standard was approved by CEN on 21 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10244-5:2001 ESIST EN 10244-5:2002

Page 2EN 10244-5:2001ContentsPageForeword.31Scope.42Normative reference.43Term and definition.44Requirements relating to coating.44.1Material.44.2Mass of coating.44.3General requirements.55Test conditions.55.1Samples.55.1.1General.55.1.2Length of samples.55.2Determination of mass of coating.55.2.1General.55.2.2Gravimetric method.55.2.3Use of atomic absorption spectrometer.65.3Adherence test.
...