prEN 14198
(Main)Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
This document specifies basic requirements for the braking of trains hauled by locomotives:
- For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system.
NOTE This ensures technical compatibility of the brake function between vehicles of various origins in a train (see 5.4).
- For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary.
In the case of a UIC brake system, this standard applies; if not, the EN 16185 series or the EN 15734 series applies.
If concerned, the UIC brake architecture described in this standard (see 5.4) can be used for brakes for multiple unit train and high speed trains and urban rail described in the EN 13452 series, the EN 16185 series and the EN 15734 series.
This document also takes into account electrical and electronic control functions and additional brake systems like dynamic brakes and adhesion independent brakes. The brake system requirements, which are specific for on-track machines are set out in EN 14033-1.
This document does not apply to Urban Rail rolling stock braking system, which is specified by EN 13452-1.
Bahnanwendungen - Bremsen - Anforderungen an die Bremsausrüstung lokbespannter Züge
Applications ferroviaires - Freinage - Exigences concernant le système de freinage des trains tractés par locomotive
Železniške naprave - Zavore - Zahteve, ki jih morajo izpolnjevati zavorni sistemi vlakov, vlečeni z lokomotivami
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14198:2023
01-september-2023
Železniške naprave - Zavore - Zahteve, ki jih morajo izpolnjevati zavorni sistemi
vlakov, vlečeni z lokomotivami
Railway applications - Braking - Requirements for the brake system of trains hauled by
locomotives
Bahnanwendungen - Bremsen - Anforderungen an die Bremsausrüstung lokbespannter
Züge
Applications ferroviaires - Freinage - Exigences concernant le système de freinage des
trains tractés par locomotive
Ta slovenski standard je istoveten z: prEN 14198
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 14198:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14198:2023
---------------------- Page: 2 ----------------------
oSIST prEN 14198:2023
DRAFT
EUROPEAN STANDARD
prEN 14198
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 45.040; 45.060.01 Will supersede EN 14198:2016+A2:2021
English Version
Railway applications - Braking - Requirements for the
brake system of trains hauled by locomotives
Applications ferroviaires - Freinage - Exigences Bahnanwendungen - Bremsen - Anforderungen an die
concernant le système de freinage des trains tractés Bremsausrüstung lokbespannter Züge
par locomotive
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14198:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14198:2023
prEN 14198:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Symbols and abbreviated terms . 9
5 Requirements . 10
5.1 General requirements of the train brake system . 10
5.2 General safety requirements . 10
5.2.1 Design principles . 10
5.2.2 Fire protection . 11
5.2.3 Environmental condition .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.