CEN ISO/TR 21186-1:2021
(Main)Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 1: Standardization landscape and releases (ISO/TR 21186-1:2021)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 1: Standardization landscape and releases (ISO/TR 21186-1:2021)
This document
— describes standardization activities related to C-ITS on a global level by major standard development organizations (SDOs);
— explains the various purposes of deliverables from SDOs and introduces a classification scheme of such documents;
— describes methods on how C-ITS services are presented and performed;
— identifies an approach for C-ITS releases and exemplifies this approach;
— presents a list of standards (Bibliography) with special relevance for C-ITS.
Kooperative intelligente Verkehrssyteme (C-ITS) - Leitfäden zur Nutzung von Normen - Teil 1: Normungslandschaft und Veröffentlichungen (ISO/TR 21186-1:2021)
Systèmes de transport intelligents coopératifs (C-ITS) - Lignes directrices sur l'utilisation des normes - Partie 1: Paysage de la normalisation et diffusions (ISO/TR 21186-1:2021)
Kooperativni inteligentni transportni sistemi (C-ITS) - Smernice za uporabo standardov - 1. del: Pokrajina standardizacije in izdaje standardov C-ITS (ISO/TR 21186-1:2021)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2021
Kooperativni inteligentni transportni sistemi (C-ITS) - Smernice za uporabo
standardov - 1. del: Pokrajina standardizacije in izdaje standardov C-ITS (ISO/TR
21186-1:2021)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards
- Part 1: Standardization landscape and releases (ISO/TR 21186-1:2021)
Kooperative intelligente Verkehrssyteme (C-ITS) - Leitfäden zur Nutzung von Normen -
Teil 1: Normungslandschaft und Veröffentlichungen (ISO/TR 21186-1:2021)
Systèmes de transport intelligents coopératifs (C-ITS) - Lignes directrices sur l'utilisation
des normes - Partie 1: Paysage de la normalisation et diffusions (ISO/TR 21186-1:2021)
Ta slovenski standard je istoveten z: CEN ISO/TR 21186-1:2021
ICS:
01.120 Standardizacija. Splošna Standardization. General
pravila rules
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TR 21186-1
TECHNICAL REPORT
RAPPORT TECHNIQUE
January 2021
TECHNISCHER BERICHT
ICS 01.120; 03.220.01; 35.240.60
English Version
Cooperative intelligent transport systems (C-ITS) -
Guidelines on the usage of standards - Part 1:
Standardization landscape and releases (ISO/TR 21186-
1:2021)
Systèmes de transport intelligents coopératifs (C-ITS) - Kooperative intelligente Verkehrssyteme (C-ITS) -
Lignes directrices sur l'utilisation des normes - Partie Leitfäden zur Nutzung von Normen - Teil 1:
1: Paysage de la normalisation et diffusions (ISO/TR Normungslandschaft und Veröffentlichungen (ISO/TR
21186-1:2021) 21186-1:2021)
This Technical Report was approved by CEN on 10 October 2020. It has been drawn up by the Technical Committee CEN/TC 278.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 21186-1:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TR 21186-1:2021) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of ISO/TR 21186-1:2021 has been approved by CEN as CEN ISO/TR 21186-1:2021 without any
modification.
TECHNICAL ISO/TR
REPORT 21186-1
First edition
2021-01
Cooperative intelligent transport
systems (C-ITS) — Guidelines on the
usage of standards —
Part 1:
Standardization landscape and
releases
Systèmes de transport intelligents coopératifs (C-ITS) - Lignes
directrices sur l'utilisation des normes —
Partie 1: Paysage de la normalisation et diffusions
Reference number
ISO/TR 21186-1:2021(E)
©
ISO 2021
ISO/TR 21186-1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
ISO/TR 21186-1:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Standardization at SDOs . 1
4.1 General . 1
4.2 Goals of standardization . 2
4.3 Releases . 2
4.4 SDOs . 2
4.5 Standardization areas . 3
4.6 Categories of SDO deliverables . 4
5 C-ITS services . 5
5.1 General . 5
5.2 Service initiation and provisioning . 8
5.2.1 Services for information dissemination based on broadcast messages . 8
5.2.2 Services based on service announcement . 9
5.2.3 Services initiated by a central station .10
5.3 Use cases .10
6 Releases .10
6.1 Disclaimer .10
6.2 Concept of releases .10
6.3 Management of releases .11
6.4 Examples of existing C-ITS releases .12
6.5 C-ITS release 2 from CEN and ISO .13
6.5.1 General.13
6.5.2 Release identification .13
6.5.3 Supported C-ITS services .13
6.5.4 Standards cluster .14
Bibliography .16
ISO/TR 21186-1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
278, Intelligent transport systems, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
A list of all parts in the ISO 21186 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
ISO/TR 21186-1:2021(E)
Introduction
This document is part of a family of deliverables from Standard Development Organizations (SDOs)
for Cooperative Intelligent Transport Systems (C-ITS), which is a subset of standards for Intelligent
Transport Systems (ITS).
ITS aims to improve surface transportation in terms of:
— safety
e.g. crash avoidance, obstacle detection, emergency calls, dangerous goods;
— efficiency
e.g. navigation, green wave, priority, lane access control, contextual speed limits, car sharing;
— comfort
e.g. telematics, parking, electric vehicle charging, infotainment;
— sustainability
by applying information and communication technologies (ICT).
The whole set of standards for deployment of C-ITS is difficult to understand by developers of equipment
and software, especially ITS application software, and thus guidelines explaining a beneficial choice
of standards (C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.