Sensory analysis - Methodology - Guidelines for the measurement of the performance of a quantitative descriptive sensory panel (ISO 11132:2021)

This document gives guidelines for assessing the overall performance of a quantitative descriptive panel and the performance of each panel member.
This document is applicable to the validation of the training of individual assessors or panels, as well as to the performance monitoring of established panels.
This document does not apply to the panel performance for descriptive methods where the individual scores of each assessor are not recorded, where there is no single list of attributes that is common to all the assessors, or where dominance rather than intensity is measured. Consequently, the performance of descriptive panels using methods such as consensus profile, free-choice profile, flash profile and temporal dominance of sensations (TDS) are out of scope.
The methods specified in this document are for monitoring and assessing the ability of a panel and its assessors to discriminate between products, the agreement between assessors of the same panel and the repeatability of these assessors in their intensity scoring.
Reproducibility, including both the comparison between panels and the comparison within the same panel of several evaluations conducted under different conditions (i.e. separated in time), is out of scope of this document.
The methods specified in this document can be used, in full or a selection only, by the panel leader to appraise continuously the performance of panels or individual assessors. The methods listed are not exhaustive and other appropriate methods can also be used.

Sensorische Analyse - Methodologie - Leitlinien zur Überprüfung der Leistungsfähigkeit eines quantitativ beschreibenden sensorischen Panels (ISO 11132:2021)

Dieses Dokument enthält Leitlinien zur Bewertung der allgemeinen Leistungsfähigkeit eines quantitativ beschreibenden Panels und der Leistungsfähigkeit jedes Panelmitglieds.
Dieses Dokument ist anwendbar auf die Validierung der Schulung einzelner Prüfpersonen oder Panels sowie auf die Überprüfung der Leistungsfähigkeit bestehender Panels.
Dieses Dokument gilt nicht für die Leistungsfähigkeit eines Panels für beschreibende Verfahren, bei denen die einzelnen Punktzahlen jeder Prüfperson nicht aufgezeichnet werden, oder für Fälle, bei denen es keine einzelne Liste mit Merkmalen gibt, die allen Prüfpersonen gemein ist, oder für den Fall, dass eher die Dominanz als die Intensität gemessen wird. Folglich ist die Leistungsfähigkeit von beschreibenden Panels, die Verfahren wie Konsensprofil, freies Auswahlprofil, Flash Profil und zeitliche Dominanz von Empfindungen (TDS, en: temporal dominance of sensations) anwenden,  nicht im Anwendungsbereich erfasst.
Die in diesem Dokument festgelegten Verfahren dienen der Überprüfung und Bewertung der Fähigkeit eines Panels und dessen Prüfpersonen, zwischen Produkten zu unterscheiden, der Übereinstimmung zwischen den Prüfpersonen desselben Panels und der Wiederholbarkeit dieser Prüfpersonen in ihren Intensitätspunktzahlen.
Die Vergleichbarkeit, einschließlich des Vergleiches zwischen Panels und des Vergleiches innerhalb desselben Panels bei verschiedenen Bewertungen, die unter verschiedenen Bedingungen durchgeführt werden (d. h. zeitlich gesondert), liegt nicht im Anwendungsbereich dieses Dokumentes.
Die in diesem Dokument festgelegten Verfahren können im Ganzen oder nur in einer Auswahl durch den Leiter des Panels angewendet werden, um die Leistungsfähigkeit des Panels oder einzelner Prüfpersonen fortlaufend einzuschätzen. Bei den aufgeführten Verfahren handelt es sich nicht um eine vollständige Aufführung und andere geeignete Verfahren können ebenfalls angewendet werden.

Analyse sensorielle - Méthodologie - Lignes directrices pour le mesurage de la performance d'un jury descriptif quantitatif (ISO 11132:2021)

Le présent document donne des lignes directrices pour évaluer la performance globale d’un jury descriptif quantitatif et la performance de chaque membre du jury.
Le présent document est applicable à la validation de l’entraînement des sujets ou des jurys, ainsi qu’au contrôle de la performance des jurys établis.
Le présent document ne s’applique pas à la performance du jury pour les méthodes descriptives dans lesquelles les notes individuelles de chaque sujet ne sont pas enregistrées, dans lesquelles il n’existe pas une liste unique d’attributs communs à tous les sujets, ou dans lesquelles la dominance plutôt que l’intensité est mesurée. Par conséquent, la performance des jurys descriptifs utilisant des méthodes telles que le profil par consensus, le profil libre choix, le profil flash et la dominance temporelle des sensations (DTS) ne fait pas partie du domaine d’application.
Les méthodes spécifiées dans le présent document servent à contrôler et évaluer la capacité d’un jury et de ses sujets à discriminer les produits, l’accord entre les sujets d’un même jury et la répétabilité de ces sujets lorsqu’ils attribuent des notes d’intensité.
La reproductibilité, y compris la comparaison entre jurys et la comparaison au sein d’un même jury, de plusieurs évaluations effectuées sous différentes conditions (c’est-à-dire, séparées dans le temps), ne fait pas partie du domaine d’application du présent document.
Les méthodes spécifiées dans le présent document peuvent être utilisées, en totalité ou en partie, par le responsable du jury pour évaluer de façon continue la performance du jury ou de chaque sujet. Les méthodes énumérées ne sont pas exhaustives et d’autres méthodes appropriées peuvent également être utilisées.

Senzorična analiza - Metodologija - Smernice za merjenje izvajanja kvantitativnega opisnega senzoričnega panela (ISO 11132:2021)

General Information

Status
Published
Publication Date
21-Sep-2021
Withdrawal Date
30-Mar-2022
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Sep-2021
Completion Date
22-Sep-2021

Relations

Buy Standard

Standard
EN ISO 11132:2021 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2021
Nadomešča:
SIST EN ISO 11132:2017
Senzorična analiza - Metodologija - Smernice za merjenje izvajanja kvantitativnega
opisnega senzoričnega panela (ISO 11132:2021)
Sensory analysis - Methodology - Guidelines for the measurement of the performance of
a quantitative descriptive sensory panel (ISO 11132:2021)
Sensorische Analyse - Methodologie - Leitlinien zur Überprüfung der Leistungsfähigkeit
eines quantitativen sensorischen Panels (ISO 11132:2021)
Analyse sensorielle - Méthodologie - Lignes directrices pour le mesurage de la
performance d'un jury descriptif quantitatif (ISO 11132:2021)
Ta slovenski standard je istoveten z: EN ISO 11132:2021
ICS:
67.240 Senzorična analiza Sensory analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11132
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2021
EUROPÄISCHE NORM
ICS 67.240 Supersedes EN ISO 11132:2017
English Version
Sensory analysis - Methodology - Guidelines for the
measurement of the performance of a quantitative
descriptive sensory panel (ISO 11132:2021)
Analyse sensorielle - Méthodologie - Lignes directrices Sensorische Analyse - Methodologie - Leitlinien zur
pour le mesurage de la performance d'un jury Überprüfung der Leistungsfähigkeit eines
descriptif quantitatif (ISO 11132:2021) quantitativen sensorischen Panels (ISO 11132:2021)
This European Standard was approved by CEN on 29 August 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11132:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 11132:2021) has been prepared by Technical Committee ISO/TC 34 "Food
products" in collaboration with Technical Committee CEN/SS C01 “Food Products” the secretariat of
which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2022, and conflicting national standards shall
be withdrawn at the latest by March 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11132:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11132:2021 has been approved by CEN as EN ISO 11132:2021 without any modification.

INTERNATIONAL ISO
STANDARD 11132
Second edition
2021-09
Sensory analysis — Methodology —
Guidelines for the measurement of
the performance of a quantitative
descriptive sensory panel
Analyse sensorielle — Méthodologie — Lignes directrices pour le
mesurage de la performance d'un jury descriptif quantitatif
Reference number
ISO 11132:2021(E)
©
ISO 2021
ISO 11132:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 11132:2021(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
4.1 Two possible approaches . 3
4.1.1 General. 3
4.1.2 Performance measurement via a dedicated procedure . 3
4.1.3 Ongoing monitoring via routine product profiling . 4
4.2 Indicators of panel or individual assessor performance . 4
4.3 Statistical analyses . 5
5 Prerequisites . 5
5.1 Experimental conditions . 5
5.2 Qualification of assessors . 5
6 Performance measurement via a dedicated procedure . 5
6.1 Sample and attribute selection . 5
6.2 Experimental designs . 5
6.2.1 General. 5
6.2.2 Randomized block design . 6
6.2.3 Balanced and random designs . 6
6.2.4 Same order design . 6
6.3 Statistical analyses . 7
6.4 Performance of the overall panel — Interpretation of statistical output . 9
6.4.1 Key attribute discrimination . 9
6.4.2 Agreement at panel level . 9
6.4.3 Repeatability of the panel .10
6.5 Performance of individual assessors — Interpretation of statistical output .10
6.5.1 Discrimination ability of an assessor .10
6.5.2 Repeatability of an assessor .10
6.5.3 Consistency of an assessor .10
6.5.4 Agreement among assessors .11
6.5.5 Bias — Different use of scale .11
6.6 Performance issues .12
6.6.1 General.12
6.6.2 Panel .12
6.6.3 Individual assessor .12
6.7 Experimental design for following up the performance over time .12
7 Procedure for ongoing monitoring via routine product profiling .12
7.1 Attribute selection .12
7.2 Statistical analyses .12
7.3 Following up the performance over time .12
7.4 Statistical analysis of data over time .12
7.5 Statistical analysis of complete profiles .13
Annex A (informative) Example of a practical application .14
Bibliography .22
ISO 11132:2021(E)
Foreword
ISO (the International Orga
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.