Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2024)

This document specifies the general requirements for sampling, preservation, handling, transport and storage of all water samples for physicochemical, chemical, hydrobiological and microbiological analyses and determination of radiochemical analytes and activities.
Guidance on the validation of storage times of water samples is provided in ISO/TS 5667-25.
This document is not applicable to water samples intended for ecotoxicological assays, biological assays (which is specified in ISO 5667-16), passive sampling (which is specified in ISO 5667-23) and microplastics (which is specified in ISO 5667-27).
This document is particularly appropriate when samples cannot be analysed on site and have to be transported to a laboratory for analysis.

Wasserbeschaffenheit - Probenahme - Teil 3: Konservierung und Handhabung von Wasserproben (ISO 5667-3:2024)

Dieses Dokument legt die allgemeinen Anforderungen an die Probenahme, Konservierung, Handhabung, den Transport und die Lagerung aller Wasserproben für physikalisch-chemische, chemische, hydrobiologische und mikrobiologische Untersuchungen sowie für die Bestimmung von radiochemischen Analyten und Aktivitäten fest.
Eine Anleitung zur Validierung der Aufbewahrungszeiten von Wasserproben ist in ISO/TS 5667 25 enthalten.
Dieses Dokument ist nicht anwendbar auf Wasserproben für ökotoxikologische Untersuchungen, für biologische Untersuchungen (diese sind in ISO 5667 16 festgelegt), zur passiven Probenahme (in ISO 5667 23 festgelegt) sowie für Mikroplastik (in ISO 5667 27 festgelegt).
Dieses Dokument ist besonders geeignet, wenn Proben nicht vor Ort untersucht werden können und zur Analyse in ein Labor transportiert werden müssen.

Qualité de l'eau - Échantillonnage - Partie 3: Conservation et manipulation des échantillons d'eau (ISO 5667-3:2024)

Le présent document spécifie les exigences générales relatives à l’échantillonnage, à la conservation, à la manipulation, au transport et au stockage de tous les échantillons d’eau destinés à des analyses physico-chimiques, chimiques, hydrobiologiques et microbiologiques et à des quantifications d’analytes radiochimiques et d’activités.
Des recommandations relatives à la validation de durées de stockage des échantillons d’eau sont données dans l’ISO/TS 5667-25.
Le présent document ne s’applique pas aux échantillons d’eau destinés à des essais écotoxicologiques ou à des essais biologiques (qui sont couverts par l’ISO 5667-16), à l’échantillonnage passif (qui est couvert par l’ISO 5667-23), ni aux microplastiques (qui sont couverts par l’ISO 5667-27).
Le présent document s’applique en particulier chaque fois qu’un échantillon ne peut être analysé sur site et doit être transporté vers un laboratoire pour analyse.

Kakovost vode - Vzorčenje - 3. del: Konzerviranje in ravnanje z vzorci vode (ISO 5667-3:2024)

Ta dokument določa splošne zahteve za vzorčenje, konzerviranje, ravnanje, prevoz in shranjevanje vseh vzorcev vode za fizikalno-kemijske, kemijske, hidrobiološke in mikrobiološke analize in določanje radiokemičnih analitov in aktivnosti.
Smernice o potrjevanju časov shranjevanja vzorcev vode so podane v standardu ISO/TS 5667-25.
Ta dokument se ne uporablja za vzorce vode, ki so namenjeni za ekotoksikološke preskuse, biološke preskuse (določeno v standardu ISO 5667-16), pasivno vzorčenje (določeno v standardu ISO 5667-23) in mikroplastiko (določeno v standardu ISO 5667-27).
Ta dokument je zlasti primeren, če vzorcev ni mogoče analizirati na mestu samem in jih je treba prenesti v laboratorij za analizo.

General Information

Status
Published
Publication Date
09-Apr-2024
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
10-Apr-2024
Completion Date
10-Apr-2024

Relations

Buy Standard

Standard
EN ISO 5667-3:2024
English language
75 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2024
Nadomešča:
SIST EN ISO 5667-3:2018
Kakovost vode - Vzorčenje - 3. del: Konzerviranje in ravnanje z vzorci vode (ISO
5667-3:2024)
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667
-3:2024)
Wasserbeschaffenheit - Probenahme - Teil 3: Konservierung und Handhabung von
Wasserproben (ISO 5667-3:2024)
Qualité de l'eau - Échantillonnage - Partie 3: Conservation et manipulation des
échantillons d'eau (ISO 5667-3:2024)
Ta slovenski standard je istoveten z: EN ISO 5667-3:2024
ICS:
13.060.45 Preiskava vode na splošno Examination of water in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 5667-3
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 13.060.45 Supersedes EN ISO 5667-3:2018
English Version
Water quality - Sampling - Part 3: Preservation and
handling of water samples (ISO 5667-3:2024)
Qualité de l'eau - Échantillonnage - Partie 3: Wasserbeschaffenheit - Probenahme - Teil 3:
Conservation et manipulation des échantillons d'eau Konservierung und Handhabung von Wasserproben
(ISO 5667-3:2024) (ISO 5667-3:2024)
This European Standard was approved by CEN on 1 March 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5667-3:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 5667-3:2024) has been prepared by Technical Committee ISO/TC 147 "Water
quality" in collaboration with Technical Committee CEN/TC 230 “Water analysis” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall
be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 5667-3:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5667-3:2024 has been approved by CEN as EN ISO 5667-3:2024 without any
modification.
International
Standard
ISO 5667-3
Sixth edition
Water quality — Sampling —
2024-03
Part 3:
Preservation and handling of
water samples
Qualité de l'eau — Échantillonnage —
Partie 3: Conservation et manipulation des échantillons d'eau
Reference number
ISO 5667-3:2024(en) © ISO 2024

ISO 5667-3:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 5667-3:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms for plastics . 2
5 Sampling and chain of custody . 3
6 Reagents and materials . 3
6.1 Solids .3
6.2 Solutions .4
6.3 Materials .5
7 Containers . 5
7.1 Container selection and preparation .5
7.2 On-site filtration . .6
7.3 Filling the container .6
8 Sample handling and preservation . 6
8.1 General .6
8.2 Sample handling and preservation for physical and chemical analysis .7
8.3 Sample handling and preservation for hydrobiological analysis .7
8.4 Sample handling and preservation for radiochemical analysis .8
9 Sample transport . 8
10 Identification of samples . 9
11 Sample reception . 9
12 Sample storage . 9
Annex A (informative) Techniques for sample preservation .11
Annex B (informative) Container preparation .58
Bibliography .59

iii
ISO 5667-3:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 147, Water quality, Subcommittee SC 6,
Sampling (general methods), in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 230, Water analysis, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This sixth edition cancels and replaces the fifth edition (ISO 5667-3:2018), which has been technically
revised.
The main changes are as follows:
— ISO/TS 5667-25 has been added as a reference;
— a flow diagram for preservation and storage of water samples has been added;
— references in Table A.1 have been updated;
— references in Tables A.2 and A.3 have been added;
— the previous Table A.1 has been split into Table A.1 on inor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.