EN 4013:2024

Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C

This document specifies the characteristics of self-locking, shank nuts, in NI-PH2601, silver plated, for aerospace applications.
Classification: 1 550 MPa /600 °C .

Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1 550 MPa (bei Raumtemperatur) / 600 °C

Dieses Dokument legt die Eigenschaften von selbstsichernden Einnietmuttern aus NI-PH2601, versilbert, für Anwendungen in der Luft- und Raumfahrt fest.
Klasse: 1 550 MPa /600 °C .

Série aérospatiale - Écrou à sertir, à freinage interne, en alliage résistant à chaud base nickel NI-PH2601 (Inconel 718), argenté - Classification : 1 550 MPa (à température ambiante)/600 °C

Le présent document spécifie les caractéristiques des écrous à sertir, à freinage interne, en NI-PH2601, argentés, pour les applications aérospatiales.
Classification : 1 550 MPa /600 °C.

Aeronavtika - Zakovičena matica, samozapiralna, iz toplotno odporne zlitine na nikljevi osnovi NI-PH2601 (Inconel 718), posrebrena - Klasifikacija: 1550 MPa (pri temperaturi okolice)/600 °C

General Information

• Status: Published
• Publication Date: 09-Jul-2024
• Withdrawal Date: 01-Dec-2020
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Jul-2024
• Due Date: 07-Jul-2020
• Completion Date: 10-Jul-2024
• Ref Project: SIST EN 4013:2024 - Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C

Relations

• Replaces: EN 4013:2004 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN 4013:2005
Aeronavtika - Zakovičena matica, samozapiralna, iz toplotno odporne zlitine na
nikljevi osnovi NI-PH2601 (Inconel 718), posrebrena - Klasifikacija: 1550 MPa (pri
temperaturi okolice)/600 °C
Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI PH2601
(Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C
Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1 550 MPa (bei
Raumtemperatur) / 600 °C
Série aérospatiale - Écrou à sertir, à freinage interne, en alliage résistant à chaud base
nickel NI-PH2601 (Inconel 718), argenté - Classification : 1 550 MPa (à température
ambiante)/600 °C
Ta slovenski standard je istoveten z: EN 4013:2024
ICS:
49.030.30 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4013
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 4013:2004
English Version
Aerospace series - Shank nut, self-locking, in heat resisting
nickel base alloy NI PH2601 (Inconel 718), silver plated -
Classification: 1 550 MPa (at ambient temperature)/600
°C
Série aérospatiale - Écrou à sertir, à freinage interne, Luft- und Raumfahrt - Einnietmutter, selbstsichernd,
en alliage résistant à chaud base nickel NI-PH2601 aus hochwarmfester Nickelbasislegierung NI-PH2601
(Inconel 718), argenté - Classification : 1 550 MPa (à (Inconel 718), versilbert - Klasse: 1 550 MPa (bei
température ambiante)/600 °C Raumtemperatur) / 600 °C
This European Standard was approved by CEN on 19 May 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4013:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Configuration – Dimensions – Tolerances – Masses . 4
4.2 Material . 4
4.3 Surface treatment . 5
5 Designation . 6
6 Marking . 6
7 Technical specification .
...