EN 13480-5:2024/prA1

Metallic industrial piping - Part 5: Inspection and testing

This Part of this European Standard specifies the requirements for inspection and testing of industrial piping as defined in EN 13480-1:2017 to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480-3:2017 and EN 13480-6:2017 (if applicable), and fabricated and installed in accordance with EN 13480-4:2017.

Metallische industrielle Rohrleitungen - Teil 5: Prüfung

Tuyauteries industrielles métalliques - Partie 5: Inspection et contrôle

Kovinski industrijski cevovodi - 5. del: Pregled in preskušanje - Dopolnilo A1

General Information

• Status: Not Published
• Publication Date: 12-Jul-2027
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 5 - Inspection and testing
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 04-Dec-2025
• Due Date: 24-Feb-2026
• Completion Date: 04-Dec-2025
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/601 - COMMISSION IMPLEMENTING DECISION of 1.3.2024 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards pressure equipment and assemblies in support of Directive 2014/68/EU of the European Parliament and of the Council
• Ref Project: SIST EN 13480-5:2024/oprA1:2026 - Metallic industrial piping - Part 5: Inspection and testing

Relations

• Amends: EN 13480-5:2024 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 26-Feb-2025
• Amends: EN 13480-5:2017 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 11-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2026
Kovinski industrijski cevovodi - 5. del: Pregled in preskušanje - Dopolnilo A1
Metallic industrial piping - Part 5: Inspection and testing
Metallische industrielle Rohrleitungen - Teil 5: Prüfung
Tuyauteries industrielles métalliques - Partie 5: Inspection et contrôle
Ta slovenski standard je istoveten z: EN 13480-5:2024/prA1
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13480-5:2024
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2025
ICS 23.040.01
English Version
Metallic industrial piping - Part 5: Inspection and testing
Tuyauteries industrielles métalliques - Partie 5: Metallische industrielle Rohrleitungen - Teil 5: Prüfung
Inspection et contrôle
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A1, if approved, will modify the European Standard EN 13480-5:2024. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-5:2024/prA1:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Modifications to Clause 2, "Normative references" . 4
2 Modifications to Clause 3, “Terms and definitions” . 4
3 Modification to 7.2.4.3, “Cold formed pipes” . 4
4 Modifications to 7.3, “Welding”. 4
5 Modifications to Clause 8, “Non-destructive testing of welds” . 5

European foreword
This document (EN 13480-5:2024/prA1:2025) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretar
...