iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15085-2:2020+A1:2023

(Main)

Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer

Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 2: Anforderungen an Schweißbetriebe

Dieses Dokument definiert die Klassifikationsstufen für geschweißte Bauteile, die zum Nachweis der Konformität erforderlichen üblicherweise vorzunehmenden Tätigkeiten und zu erfüllenden Anforderungen.

Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie 2 : Exigences de qualité du constructeur

Nos cope available

Železniške naprave - Varjenje železniških vozil in komponent - 2. del: Zahteve za proizvajalca varilnih naprav (vključno z dopolnilom A1)

General Information

Status
Published
Publication Date
24-Oct-2023
ICS
25.160.01 - Welding, brazing and soldering in general
45.060.01 - Railway rolling stock in general
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 31 - Welding of railway vehicules and components
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Oct-2023
Due Date
10-Apr-2023
Completion Date
25-Oct-2023
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
Ref Project
SIST EN 15085-2:2020+A1:2024 - Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer

Relations

Merged From
EN 15085-2:2020 - Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
Effective Date
09-Aug-2023
Merged From
EN 15085-2:2020/FprA1 - Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
Effective Date
09-Aug-2023

Buy Standard

EN 15085-2:2020+A1:2024EN 15085-2:2020+A1:2024
PreviousNext
Standard
EN 15085-2:2020+A1:2024
German language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15085-2:2020+A1:2024
01-maj-2024
Železniške naprave - Varjenje železniških vozil in komponent - 2. del: Zahteve za
proizvajalca varilnih naprav (vključno z dopolnilom A1)
Railway applications - Welding of railway vehicles and components - Part 2:
Requirements for welding manufacturer
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 2:
Anforderungen an Schweißbetriebe
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie
2 : Exigences de qualité du constructeur
Ta slovenski standard je istoveten z: EN 15085-2:2020+A1:2023
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 15085-2:2020+A1:2024 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15085-2:2020+A1:2024

---------------------- Page: 2 ----------------------
SIST EN 15085-2:2020+A1:2024


EN 15085-2:2020+A1
EUROPÄISCHE NORM

EUROPEAN STANDARD

Oktober 2023
NORME EUROPÉENNE
ICS 25.160.01; 45.060.01 Ersetzt EN 15085-2:2020
Deutsche Fassung

Bahnanwendungen - Schweißen von Schienenfahrzeugen und
-fahrzeugteilen - Teil 2: Anforderungen an Schweißbetriebe
Railway applications - Welding of railway vehicles and Applications ferroviaires - Soudage des véhicules et des
components - Part 2: Requirements for welding composants ferroviaires - Partie 2 : Exigences de qualité
manufacturer du constructeur
Diese Europäische Norm wurde vom CEN am 24. August 2020 angenommen und schließt Änderung ein, die am 24. August 2023
vom CEN angenommen wurde.

Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter
denen dieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben ist. Auf dem letzten Stand
befindliche Listen dieser nationalen Normen mit ihren bibliographischen Angaben sind beim CEN-CENELEC-Management-
Zentrum oder bei jedem CEN-Mitglied auf Anfrage erhältlich.

Diese Europäische Norm besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen
Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem
Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, Estland, Finnland,
Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta, den Niederlanden, Norwegen,
Österreich, Polen, Portugal, der Republik Nordmazedonien, Rumänien, Schweden, der Schweiz, Serbien, der Slowakei, Slowenien,
Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.





EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Rue de la Science 23, B-1040 Brüssel
© 2023 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. EN 15085-2:2020+A1:2023 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.

---------------------- Page: 3 ----------------------
SIST EN 15085-2:2020+A1:2024
EN 15085-2:2020+A1:2023 (D)
Inhalt
Seite
Europäisches Vorwort . 3
Einleitung . . . . . 4
1 Anwendungsbereich . 5
2 Normative Verweisungen . 5
3 Begriffe . . . . 5
4 Klassifikationsstufen und Tätigkeiten der Hersteller . 6
4.1 Klassifikationsstufe . 6
4.2 Tätigkeitsbereich des Herstellers . . 8
5 Anforderungen an den Hersteller . . 9
5.1 Allgemeines . . 9
5.2 Schweißer und Bediener . 9
5.3 Schweißaufsicht . . 9
5.3.1 Allgemeines . . 9
5.3.2 Schweißaufsicht mit umfassenden technischen Kenntnissen (StufeA) . 10
5.3.3 Schweißaufsicht mit spezifischen technischen Kenntnissen (StufeB) . 10
5.3.4 Schweißaufsicht mit technischen Basiskenntnissen (StufeC) . 10
5.3.5 Schweißtechnische Organisation . . 11
5.3.6 Untervergabe der Schweißaufsicht . 11
5.4 Prüfpersonal . . 12
5.5 Technische Anforderungen . . 12
5.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15085-2:2020/FprA1(Amendment)
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
SIST EN 15085-2:2020/kFprA1:2023

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15085-2:2020/FprA1(Amendment)
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
SIST EN 15085-2:2020/kFprA1:2023

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4126-10:2024(Main)
Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow (ISO 4126-10:2024)
kSIST FprEN ISO 4126-10:2023

This document specifies the sizing of safety valves and bursting discs for gas/liquid two-phase flow in pressurized systems such as reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers, see Figure 2. The possible fluid states at the safety device inlet that can result in two-phase flow are given in Table 1.
NOTE          The pressures used in this document are absolute pressures, not gauge pressures.

  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day