EN ISO 15748-1:2002
(Main)Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002)
Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002)
ISO 15748-1 applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland waterway vessels.
It specifies the minimum requirements for potable water supply systems to be met in order to protect the potable water and to maintain its quality.
ISO 15748-1 also provides hints on components to be used and on laying of the pipelines.
Schiffe und Meerestechnik - Trinkwasser-Versorgungsanlagen auf Schiffen und Seebauwerken - Teil 1: Planung und Konstruktion (ISO 15748-1:2002)
Diese Norm gilt für die Planung, Konstruktion und Ausführung von Trinkwasser-Versorgungsanlagen auf Seeschiffen, festgegründeten oder schwimmenden Bauwerken der Meerestechnik und auf Binnenschiffen.
Diese Norm legt die Mindestanforderungen an Trinkwasser-Versorgungsanlagen fest, die zum Schutz des Trink-wassers und zur Erhaltung der Trinkwassergüte zu erfüllen sind.
Sie gibt auch Hinweise zu den anzuwendenden Bauteilen und zum Verlegen der Rohrleitungen.
ANMERKUNG Die Trinkwasser-Übernahme und die bei der Übernahme zu beachtenden Vorschriften sind nicht Gegen-stand dieser Norm. Die Trinkwasser-Übernahme unterliegt besonderen Vorschriften.
Navires et technologie maritime - Approvisionnement en eau potable sur navires et structures maritimes - Partie 1: Planification et conception (ISO 15748-1:2002)
Ladje in pomorska tehnologija – Oskrba ladij in ostalih struktur na morju s pitno vodo – 1. del: Planiranje in projektiranje (ISO 15748-1:2002)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2004
Ladje in pomorska tehnologija – Oskrba ladij in ostalih struktur na morju s pitno
vodo – 1. del: Planiranje in projektiranje (ISO 15748-1:2002)
Ships and marine technology - Potable water supply on ships and marine structures -
Part 1: Planning and design (ISO 15748-1:2002)
Schiffe und Meerestechnik - Trinkwasser-Versorgungsanlagen auf Schiffen und
Seebauwerken - Teil 1: Planung und Konstruktion (ISO 15748-1:2002)
Navires et technologie maritime - Approvisionnement en eau potable sur navires et
structures maritimes - Partie 1: Planification et conception (ISO 15748-1:2002)
Ta slovenski standard je istoveten z: EN ISO 15748-1:2002
ICS:
47.020.30 Sistemi cevi Piping systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 15748-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 47.020.30
English version
Ships and marine technology - Potable water supply on ships
and marine structures - Part 1: Planning and design (ISO 15748-
1:2002)
Navires et technologie maritime - Approvisionnement en Schiffe und Meerestechnik - Trinkwasser-
eau potable sur navires et structures maritimes - Partie 1: Versorgungsanlagen auf Schiffen und Seebauwerken - Teil
Planification et conception (ISO 15748-1:2002) 1: Planung und Konstruktion (ISO 15748-1:2002)
This European Standard was approved by CEN on 1 May 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15748-1:2002 E
worldwide for CEN national Members.
CORRECTED 2002-06-19
Foreword
This document (EN ISO 15748-1:2002) has been prepared by Technical Committee ISO/TC 8
"Ships and marine technology" in collaboration with Technical Committee CEN/TC 300 "Sea-
going vessels and marine technology", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by November 2002, and conflicting
national standards shall be withdrawn at the latest by November 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of the International Standard ISO 15748-1:2002 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 5620-1 1992 Shipbuilding and marine structures - EN ISO 5620-1 1996
Filling connection for drinking water
tanks - Part 1: General requirements
ISO 1127 1992 Stainless steel tubes - Dimensions, EN ISO 1127 1996
tolerances and conventional masses
per unit length
ISO 14726-1 1999 Ships and marine technology - EN ISO 14726-1 2001
Identification colours for the content
of piping systems - Part 1: Main
colours and media
ISO 15748-2 2002 Ships and marine technology - EN ISO 15748-2 2002
Potable water supply on ships and
marine structures - Part 2: Method of
calculation
INTERNATIONAL ISO
STANDARD 15748-1
First edition
2002-05-01
Ships and marine technology — Potable
water supply on ships and marine
structures —
Part 1:
Planning and design
Navires et technologie maritime — Approvisionnement en eau potable sur
navires et structures maritimes —
Partie 1: Planification et conception
Reference number
ISO 15748-1:2002(E)
©
ISO 2002
ISO 15748-1:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved
ISO 15748-1:2002(E)
Contents Page
Foreword.iv
1 Scope .1
2 Normative references.1
3 Terms and definitions .2
4 Capacity requirements.5
5 Sanitary requirements.5
6 Potable water supply systems .6
7 Technical requirements .7
8 Pipelines .7
9 Pipes and pipe dimensions .9
10 Fittings and pipe joints .9
11 Fittings.9
12 Protective fittings .10
13 Pumps.10
14 Potable water tanks.11
15 Potable water heating plants.13
16 Sterilization of potable water.16
17 Layout of piping.18
18 Calculation principles .21
19 Testing and flushing of pipelines .21
Annex A (informative) Explanations.22
Annex B (informative) Appropriate pipe dimensions .23
Annex C (informative) Inspection and maintenance of filters .25
Bibliography.26
ISO 15748-1:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 15748 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15748-1 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 3,
Piping and machinery.
ISO 15748 consists of the following parts, under the general title Ships and marine technology — Potable water
supply on ships and marine structures:
— Part 1: Planning and design
— Part 2: Method of calculation
Annexes A, B and C of this part of ISO 15748 are for information only.
iv © ISO 2002 – All rights reserved
INTERNATIONAL STANDARD ISO 15748-1:2002(E)
Ships and marine technology — Potable water supply on ships
and marine structures —
Part 1:
Planning and design
1 Scope
This part of ISO 15748 applies to the planning, design and configuration of potable water supply systems on ships,
stationary or floating marine structures and inland navigation vessels.
This part of ISO 15748 specifies the minimum requirements for potable water supply systems to be met in order to
protect the potable water and to maintain its quality.
It also provides hints on components to be used and on laying of the pipelines.
NOTE The transfer of potable water and the regulations to be observed are not covered by this part of ISO 15748. The
transfer of potable water is subject to special regulations.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 15748. For dated references, subsequent amendments to, or revisions of, any of these publications
do not apply. However, parties to agreements based on this part of ISO 15748 are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain
registers of currently valid
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.