Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor

This document specifies methods of measuring the strippability and adherence of the insulation to a conductor of a finished cable.
When a particular method is not specified in the detail product specification, method A is the default test method.
Method B is suitable for wires insulated with materials showing a low adhesion to the conductor due to the poor repeatability of the test method A with this type of wires.
It is intended to be used together with EN 3475 100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 701: Abisolierbarkeit und Haftfestigkeit der Isolierung auf dem Leiter

Dieses Dokument legt Verfahren zur Bestimmung der Abisolierbarkeit und Haftfestigkeit der Isolierung auf einem Leiter einer fertigen Leitung fest.
Wenn kein bestimmtes Verfahren in der entsprechenden Produktspezifikation festgelegt ist, dann ist Verfahren A das standardmäßige Prüfverfahren.
Verfahren B ist für Drähte geeignet, die mit Werkstoffen isoliert sind, die eine niedrige Haftfestigkeit am Leiter aufweisen, da das Prüfverfahren A bei dieser Art von Drähten nur eine schlechte Wiederholpräzision aufweist.
Es ist vorgesehen, es zusammen mit EN 3475 100 anzuwenden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 701 : Dénudabilité et adhérence de l'isolation sur le conducteur

No Scope available

Aeronavtika - Električni kabli za uporabo v letalih - Preskusne metode - 701. del: Odstranljivost in oprijemljivost izolacije vodnika

General Information

Status
Not Published
Publication Date
27-Oct-2026
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
01-May-2025
Completion Date
01-May-2025

Relations

Buy Standard

Draft
prEN 3475-701:2025
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2025
Aeronavtika - Električni kabli za uporabo v letalih - Preskusne metode - 701. del:
Odstranljivost in oprijemljivost izolacije vodnika
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability
and adherence of insulation to the conductor
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren -
Teil 701: Abisolierbarkeit und Haftfestigkeit der Isolierung auf dem Leiter
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 701 : Dénudabilité et adhérence de l'isolation sur le conducteur
Ta slovenski standard je istoveten z: prEN 3475-701
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2025
ICS 49.060 Will supersede EN 3475-701:2017
English Version
Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 701: Strippability and adherence of
insulation to the conductor
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essais - Partie 701 : Luftfahrtverwendung - Prüfverfahren - Teil 701:
Dénudabilité et adhérence de l'isolation sur le Abisolierbarkeit und Haftfestigkeit der Isolierung auf
conducteur dem Leiter
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3475-701:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 4
4.1 General. 4
4.2 Insulation stripping properties . 4
4.3 Adherence of insulation to the conductor . 4
4.3.1 General. 4
4.3.2 Method A . 4
4.3.3 Method B . 5
5 Methods . 5
5.1 Method for stripping capability of the jacket (screened cables) . 5
5.2 Methods for adherence of the insulation . 5
5.2.1 Method A . 5
5.2.2 Method B . 5
6 Requirements . 6
6.1 Requirements for stripping capability of the jacket (screened cables) . 6
6.2 Requirement
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.