EN 10263-5:2017
(Main)Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
1.1 This European Standard is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including:
- 25 mm for ferritic and austenitic-ferritic steels;
- 50 mm for austenitic steels;
- 100 mm for martensitic steels.
1.2 EN 10263 1 is indispensable for the application of this part of EN 10263.
Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 5: Technische Lieferbedingungen für nichtrostende Stähle
1.1 Diese Europäische Norm gilt für runden Walzdraht, runde Stäbe und Draht aus nichtrostendem Stahl zum Kaltstauchen und Kaltfließpressen mit einem Durchmesser bis einschließlich:
- 25 mm bei ferritischen und austenitisch-ferritischen Stählen;
- 50 mm bei austenitischen Stählen;
- 100 mm bei martensitischen Stählen.
1.2 EN 10263-1 ist für die Anwendung dieses Teils von EN 10263 unabdingbar.
Barres, fil machine et fils en acier pour transformation à froid et extrusion à froid - Partie 5: Conditions techniques de livraison des aciers inoxydables
1.1 Cette norme européenne s'applique au fil machine, aux barres de section circulaire et aux fils en acier inoxydable pour déformation (frappe à froid) et extrusion à froid de diamètre inférieur ou égal à :
- 25 mm pour les aciers ferritiques et austéno-ferritiques ;
- 50 mm pour les aciers austénitiques ;
- 100 mm pour les aciers martensitiques.
1.2 L'EN 10263-1 est indispensable pour l’application de cette partie de l’EN 10263.
Jekleni drogovi, palice in žica za hladno nakrčevanje in hladno iztiskanje - 5. del: Tehnični dobavni pogoji za nerjavna jekla
1.1 Ta del standarda EN 10263 se uporablja za okrogle drogove in palice ter žice iz nerjavnega jekla, ki so namenjeni za hladno nakrčevanje in hladno iztiskanje ter imajo premer največ:
25 mm za feritna in avstenitno-feritna jekla;
50 mm za avstenitna jekla;
100 mm za martenzitna jekla.
1.2 Dokument prEN 10263-1:2013 je nepogrešljiv za uporabo tega dela standarda EN 10263.
General Information
Relations
Overview
EN 10263-5:2017 - "Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels" (CEN) specifies the technical delivery requirements for round rod, bars and wire of stainless steels intended for cold heading and cold extrusion. The standard covers product forms up to defined diameter limits (25 mm for ferritic and austenitic‑ferritic, 50 mm for austenitic, 100 mm for martensitic) and complements EN 10263‑1, which is indispensable for application.
Key topics and requirements
- Scope & classification: Applies to ferritic, austenitic, austenitic‑ferritic (duplex) and martensitic stainless steels produced for cold forming operations.
- Delivery conditions and product forms: Defines common delivery conditions and symbols (e.g. soft annealed +A, solution annealed +AT, cold drawn +C, peeled +PE, skin passed +LC) and which apply to bars, rods and wire.
- Chemical composition: Specifies cast analysis limits and permissible deviations for product analysis; includes typical stainless grades (examples: X2CrNi18‑9, X5CrNi18‑10, X6Cr17, X12Cr13) with associated element ranges.
- Mechanical properties: Requires tensile testing in specified delivery conditions; mechanical property tables give strength and elongation requirements (refer to the standard for exact values per grade and diameter).
- Surface quality: Rods are normally supplied pickled; provisions cover mechanical descaling, peeling/shaving and acceptance of minor surface imperfections from normal manufacture.
- Cold forming aptitude: Optional upsetting test procedure is defined (test piece length = 1.5 × diameter, reduced to 1/3 of initial length at ambient temperature; applicable up to 15 mm diameter) with assessment criteria to be agreed at order stage.
- Surface discontinuities: Limits for maximum admissible depth are defined; measurement by metallography (×100) is specified in case of dispute.
- Supplementary requirements & testing: Tables and annexes list additional requirements, sampling and testing rules.
Applications and users
EN 10263‑5 is used to:
- Specify material procurement for manufacturers of fasteners, cold‑headed components, and extruded cold‑formed parts.
- Guide quality engineers, metallurgists and testing laboratories in acceptance criteria for stainless steel rod, bars and wire.
- Support automotive, aerospace, electronics, and general engineering sectors where high reproducibility of cold heading/extrusion feedstock is required.
Typical users: steel mills, bar and wire producers, cold‑forming manufacturers, purchasing/specification engineers, and product designers.
Related standards
- EN 10263‑1:2017 - General technical delivery conditions (indispensable)
- EN 10020 - Steel classification
- EN 10088‑1:2014 - List of stainless steels
EN 10263‑5:2017 ensures consistent supply quality for stainless steel feedstock used in cold heading and cold extrusion, helping reduce forming defects and improve end‑product reliability.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 5: Technische Lieferbedingungen für nichtrostende StähleBarres, fil machine et fils en acier pour transformation à froid et extrusion à froid - Partie 5: Conditions techniques de livraison des aciers inoxydablesSteel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.60Jeklene palice in drogoviSteel bars and rods77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10263-5:2017SIST EN 10263-5:2018en,fr,de01-februar-2018SIST EN 10263-5:2018SLOVENSKI
STANDARDSIST EN 10263-5:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10263-5
November
t r s y ICS
y yä s v rä x râ
y yä s v rä x w Supersedes EN
s r t x uæ wã t r r sEnglish Version
Steel rodá bars and wire for cold heading and cold extrusion æ Part
wã Technical delivery conditions for stainless steels Barresá fil machine et fils en acier pour transformation à froid et extrusion à froid æ Partie
wã Conditions techniques de livraison des aciers inoxydables
Walzdrahtá Stäbe und Draht aus Kaltstauchæ und Kaltfließpressstählen æ Teil
wã Technische Lieferbedingungen für nichtrostende Stähle This European Standard was approved by CEN on
v September
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r t x uæ wã t r s y ESIST EN 10263-5:2018
...
Frequently Asked Questions
EN 10263-5:2017 is a standard published by the European Committee for Standardization (CEN). Its full title is "Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels". This standard covers: 1.1 This European Standard is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including: - 25 mm for ferritic and austenitic-ferritic steels; - 50 mm for austenitic steels; - 100 mm for martensitic steels. 1.2 EN 10263 1 is indispensable for the application of this part of EN 10263.
1.1 This European Standard is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including: - 25 mm for ferritic and austenitic-ferritic steels; - 50 mm for austenitic steels; - 100 mm for martensitic steels. 1.2 EN 10263 1 is indispensable for the application of this part of EN 10263.
EN 10263-5:2017 is classified under the following ICS (International Classification for Standards) categories: 77.140.60 - Steel bars and rods; 77.140.65 - Steel wire, wire ropes and link chains. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10263-5:2017 has the following relationships with other standards: It is inter standard links to EN 10263-5:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 10263-5:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...