EN ISO 10240:2004
(Main)Small craft - Owner's manual (ISO 10240:2004)
Small craft - Owner's manual (ISO 10240:2004)
ISO 10240:2004 specifies the information that shall be included in the owner's manual of small craft of hull length up to 24 m.
Kleine Wasserfahrzeuge - Handbuch für Schiffsführer (ISO 10240:2004)
Diese Internationale Norm legt die Informationen fest, die in einem Handbuch für Schiffsführer für kleine Wasserfahrzeuge mit einer Rumpflänge bis 24 m enthalten sein müssen.
Petits navires - Manuel du propriétaire (ISO 10240:2004)
L'ISO 10240:2004 spécifie les informations devant être incluses dans le manuel du propriétaire des petits navires d'une longueur de coque inférieure ou égale à 24 m.
Mala plovila – Priročnik za uporabo (ISO 10240:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10240:2005
01-marec-2005
0DODSORYLOD±3ULURþQLN]DXSRUDER ,62
Small craft - Owner's manual (ISO 10240:2004)
Kleine Wasserfahrzeuge - Handbuch für Schiffsführer (ISO 10240:2004)
Petits navires - Manuel du propriétaire (ISO 10240:2004)
Ta slovenski standard je istoveten z: EN ISO 10240:2004
ICS:
47.080
SIST EN ISO 10240:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 10240
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 47.080 Supersedes EN ISO 10240:1996
English version
Small craft - Owner's manual (ISO 10240:2004)
Petits navires - Manuel du propriétaire (ISO 10240:2004) Kleine Wasserfahrzeuge - Handbuch für Schiffsführer (ISO
10240:2004)
This European Standard was approved by CEN on 7 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10240:2004: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 10240:2004 (E)
Foreword
This document (EN ISO 10240:2004) has been prepared by Technical Committee ISO/TC
ISO/TC 188 "Small craft", in collaboration with CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2005, and conflicting national
standards shall be withdrawn at the latest by April 2005.
This document supersedes EN ISO 10240:1996.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 10240:2004 has been approved by CEN as EN ISO 10240:2004 without any
modifications.
2
---------------------- Page: 3 ----------------------
EN ISO 10240:2004 (E)
ANNEX ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25 EEC amended by
2003/44/EC
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 94/25 EEC amended by 2003/44/EC.
Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been implemented as a national standard in at least one Member State,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the
limits of the scope of this standard, a presumption of conformity with the corresponding Essential
Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this International Standard and Directive
94/25/EG amended by 2003/44/EC
Essential Requirements (ERs) of
Clause(s)/sub-clause(s) of this
EU Directive 94/25/EC amended Qualifying remarks/notes
International Standard
by 2003/44/EC
All clauses Annex I, 2.5 Owner’s manual
WARNING: Other requirements and other EU Directives may be applicable to the product(s)
falling within the scope of this standard.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.