EN 13143:2003
(Main)Metallic and other inorganic coatings - Definitions and conventions concerning porosity
Metallic and other inorganic coatings - Definitions and conventions concerning porosity
This European Standard defines porosity and its associated terms and outlines the principles involved in porosity testing of metallic and related inorganic coatings. It also considers the purpose of porosity testing, thereby assisting the user to select the most suitable test for the product and its service application.
The porosity test cannot be used to establish corrosion performance standards.
Metallische und andere anorganische Überzüge - Definitionen und Festlegungen, die die Porigkeit betreffen
Die Europäische Norm legt die Porigkeit und die zugehörenden Begriffe fest und beschreibt die Grundlagen, die sich auf die Porenprüfung von metallischen und verwandten Schichten beziehen. Ferner wird auf den Zweck der Porenprüfung eingegangen, der darin besteht, den Anwender bei der Auswahl der für das jeweilige Produkt und seine Anwendung geeignetsten Prüfung zu unterstützen. Die Porenprüfung kann nicht als Ersatz für Korrosionsprüfnormen eingesetzt werden.
Revêtements métalliques et autres revêtements non organiques - Définitions et principes concernant la porosité
La présente Norme européenne définit la porosité et les termes qui y sont associés et présente les principes liés au contrôle de la porosité des revêtements métalliques et autres revêtements non organiques. Elle prend également en compte l'objet de ces contrôles de porosité afin d'aider l'utilisateur à choisir quel essai est le plus approprié pour son produit et ses applications.
L'essai de porosité ne peut pas être utilisé pour rédiger des normes de performance en corrosion.
Kovinske in druge anorganske prevleke - Definicije in dogovori v zvezi s poroznostjo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinske in druge anorganske prevleke - Definicije in dogovori v zvezi s poroznostjoMetallische und andere anorganische Überzüge - Definitionen und Festlegungen, die die Porigkeit betreffenRevetements métalliques et autres revetements non organiques - Définitions et principes concernant la porositéMetallic and other inorganic coatings - Definitions and conventions concerning porosity25.220.40Kovinske prevlekeMetallic coatings01.040.25Izdelavna tehnika (Slovarji)Manufacturing engineering (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13143:2003SIST EN 13143:2003en01-december-2003SIST EN 13143:2003SLOVENSKI
STANDARD
SIST EN 13143:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13143March 2003ICS 01.040.25; 25.220.40; 25.220.99English versionMetallic and other inorganic coatings - Definitions andconventions concerning porosityRevêtements métalliques et autres revêtements nonorganiques - Définitions et principes concernant la porositéMetallische und andere anorganische Überzüge -Definitionen und Festlegungen, die die Porigkeit betreffenThis European Standard was approved by CEN on 27 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13143:2003 ESIST EN 13143:2003
EN 13143:2003 (E)2ContentspageForeword.31Scope.42Terms and definitions.43Purpose of porosity testing.44Principles.54.1Electrochemical testing.54.2Exposure test.55Rating of test specimens.56Test report.5Bibliography.6SIST EN 13143:2003
EN 13143:2003 (E)3ForewordThis document (EN 13143:2003) has been prepared by Technical Committee CEN/TC 262, "Metallic and otherinorganic coatings", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by September 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13143:2003
EN 13143:2003 (E)41 ScopeThis European Standard defines porosity and its associated terms and outlines the principles involved in porositytesting of metallic and related inorganic coatings. It also considers the purpose of porosity testing, thereby assistingthe user to se
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.