EN 3672:2008

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient temperature)/730 °C

This standard specifies the characteristics of self-locking shank nuts in NI-P101HT, silver plated, for use in 30° cone holes, for aerospace applications.
Classification: 1 210 MPa /730 °C

Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1 210 MPa (bei Raumtemperatur)/730 °C

Diese Norm legt die Eigenschaften der folgenden Ausführungen von Doppelringschlüsseln fest: gerade, abgewinkelt und flach gekröpft.

Série aérospatiale - Ecrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-P101HT (Waspaloy), argentés, pour sertissage 30° - Classification: 1 210 MPa (à température ambiante)/730 °C

Aeronavtika - Zakovičene matice, samovarovalne, iz toplotnoodporne zlitine na nikljevi osnovi NI-P101HT (Waspaloy), posrebrene, za 30° odprtine - Klasifikacija 1 210 MPa (pri sobni temperaturi)/730 °C

General Information

• Status: Withdrawn
• Publication Date: 05-Aug-2008
• Withdrawal Date: 20-Dec-2016
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3672:2008 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient temperature)/730 °C

Relations

• Replaced By: EN 3672:2016 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C
• Effective Date: 04-Feb-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2008
$HURQDYWLND=DNRYLþHQHPDWLFHVDPRYDURYDOQHL]WRSORWQRRGSRUQH]OLWLQHQD
QLNOMHYLRVQRYL1,3+7:DVSDOR\SRVUHEUHQH]DƒRGSUWLQH.ODVLILNDFLMD
03DSULVREQLWHPSHUDWXULƒ&
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-
P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient
temperature)/730 °C
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-P101HT (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1
210 MPa (bei Raumtemperatur)/730 °C
Série aérospatiale - Ecrous à sertir, à freinage interne, en alliage résistant à chaud à
base de nickel NI-P101HT (Waspaloy), argentés, pour sertissage 30° - Classification: 1
210 MPa (à température ambiante)/730 °C
Ta slovenski standard je istoveten z: EN 3672:2008
ICS:
49.030.30 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3672
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2008
ICS 49.030.30
English Version
Aerospace series - Shank nuts, self-locking, in heat resisting
nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30°
swage - Classification: 1 210 MPa (at ambient temperature)/730
°C
Série aérospatiale - Ecrous à sertir, à freinage interne, en Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus
alliage résistant à chaud à base de nickel NI-P101HT
hochwarmfester Nickelbasislegierung NI-P101HT
(Waspaloy), argentés, pour sertissage 30° - Classification: (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1 210
1 210 MPa (à température ambiante)/730 °C MPa (bei Raumtemperatur)/730 °C
This European Standard was approved by CEN on 21 December 2007.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3672:2008: E
worldwide for CEN national Members.

Contents Page
1 Scope.4
2 Normative references.4
3 Required characteristics.4
3.1 Configuration, dimensions, tolerances, masses.4
3.2 Material.4
3.3 Surface treatment.5
4 Designation.6
5 Marking.6
6 Technical specification.6

Figures
Figure 1 — Shank nuts. 5

Tables
Table 1 — Dimensions and masses. 6

SIST EN 3672:200
...