iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CR 13737:2001

(Main)

Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply"

Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply"

No scope available

Vodilo za uporabo funkcionalnih standardov, ki jih je pripravil CEN/TC 234 "Oskrba s plinom"

General Information

Status
Withdrawn
Publication Date
20-Nov-2001
Withdrawal Date
17-Jul-2012
ICS
91.140.40 - Gas supply systems
Technical Committee
CEN/TC 234 - Gas infrastructure
Drafting Committee
CEN/TC 234 - Gas infrastructure
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Jul-2012
Completion Date
18-Jul-2012
Ref Project
SIST CR 13737:2004 - Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply"

Relations

Replaced By
CEN/TR 13737-1:2012 - Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General
Effective Date
08-Jun-2022
Replaced By
CEN/TR 13737-2:2014 - Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards
Effective Date
08-Jun-2022

Buy Standard

CR 13737:2004CR 13737:2004
PreviousNext
Standard
CR 13737:2004
English language
148 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vodilo za uporabo funkcionalnih standardov, ki jih je pripravil CEN/TC 234 "Oskrba s plinom"Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply"91.140.40Sistemi za oskrbo s plinomGas supply systemsICS:Ta slovenski standard je istoveten z:CR 13737:2001SIST CR 13737:2004en01-februar-2004SIST CR 13737:2004SLOVENSKI
STANDARD
CEN REPORTRAPPORT CENCEN BERICHTCR 13737November 2001ICS 91.140.40English versionImplementation Guide for functional standards prepared byCEN/TC 234 “Gas supply”This CEN Report was approved by CEN on 4 August 2001. It has been drawn up by the Technical Committee CEN/TC 234.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CR 13737:2001 ESIST CR 13737:2004

EN 12007-1 to -4 and EN12327 are applicable.402.3.2More restrictive requirements in Czech legislation/regulations.412.4Page for Finland.422.4.1Relevant Finnish legislation/regulations for gas distribution to which
EN 12007-1 to -4 and EN12327 are applicable.422.4.2More restrictive requirements in Finnish legislation/regulations.422.5Page for France.432.5.1Relevant French legislation/regulations for gas distribution to which EN 12007-1 to -4 and EN 12327are applicable.432.6Page for Germany.442.6.1Relevant German legislation/regulations for gas distribution to which EN 12007-1 to -4 and EN12327 are applicable.442.6.2More restrictive requirements in German legislation/regulations.462.7Page for Italy.472.7.1Relevant Italian legislation/regulations and standards for gas installation to which EN 12007-1 to –4and EN 12327 are applicable.472.7.2More restrictive requirements in Italian legislation/regulations.492.8Page for the Netherlands.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 16395:2023(Main)
Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
SIST-TP CEN/TR 16395:2024

This Technical Report gives explanation on the pressure definitions and pressure units used by the gas network operators with regard to the standards of CEN/TC 234 “Gas infrastructure” listed in Clause 2.
The European Standards of CEN/TC 234 comprise the functional requirements in the field of gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances, including transmission, distribution, storage, compression, pressure regulation and metering, installation, injection of (renewable) gases such as biomethane, hydrogen, gas quality issues and others.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15001-2:2023(Main)
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
SIST EN 15001-2:2023

This European Standard specifies detailed functional requirements for the commissioning, operation and maintenance of
-   industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of
-   non-industrial gas installations (residential and commercial) with an operating pressure greater than 5 bar,
starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This European Standard also covers the pipework to the inlet connection of a gas appliance that is not included within the scope of the appliance standard.
NOTE   The use of the term installation and pipework is interchangeable.
Apart from the exceptions stated below, this standard applies to gas installations operating at ambient temperatures between -20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 for metallic pipework.
For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar EN 1775 applies.
For gas installations that do not fall within the scope of EN 1775 or other European Standards, this European Standard applies.
In this European Standard, the term "gas" refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure. These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases as classified in Table 1 of EN 437:2003+A1:2009. The given values are considered as normal conditions for all volumes given in this standard.
This European Standard is applicable to installation pipework for the carriage of:
-   processed, non-toxic and non-corrosive natural gas according to EN 437:2003+A1:2009 and EN 16726 -Gas infrastructure - Quality of gas - Group H”,
-   vaporized LNG,
-   biomethane, complying with EN 16723-1,
-   vaporized LNG.
NOTE   The specification of vaporized LNG is equal to that of natural gas as classified in EN 437:2003+A1:2009.
This European Standard does not cover pipework for hydrogen rich gases that fall outside the definitions within EN 437:2003+A1:2009. LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure (e.g. between the storage vessel and its pressure regulator).
In this European Standard, all pressures are gauge pressures unless otherwise stated.
This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that more detailed national standards and/or code of practice may exist in the CEN member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
For gas installations within the scope of this standard, national legislation and regulations have to be taken into account.
Functional requirements for design, selection of materials, construction, inspection and testing of industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of gas installations greater than 5 bar in buildings and areas intended for residential, commercial, public and mixed uses are described in EN 15001-1.
Generally, additional safety precautions may be necessary where non odorized gas is used. For non-industrial purposes, the gas should be odorized.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15001-1:2023(Main)
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
SIST EN 15001-1:2023

This European Standard specifies detailed functional requirements for the design, selection of materials, construction, inspection and testing of:
-   industrial gas installation pipework and assemblies with an operating pressure greater than 0,5 bar; and
-   non-industrial gas installation pipework (residential and commercial) with an operating pressure greater than 5 bar in buildings;
starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This standard also covers the pipework to the inlet connection of a gas appliance that is not included within the scope of the appliance standard.
NOTE 1   The use of the term installation and pipework is interchangeable.
Apart from the exceptions stated below, this standard applies to gas installations operating at ambient temperatures between −20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 (all parts) for metallic pipework.
For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar in buildings, EN 1775 applies.
For gas installations that do not fall within the scope of EN 1775 or other European Standards, this standard applies.
In this European Standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure (normal conditions). These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases as classified in EN 437:2003+A1:2009, Table 1. The given values are considered as normal conditions for all volumes given in this standard.
This European Standard is applicable to installation pipework for the carriage of:
-   processed, non-toxic and non-corrosive natural gas according to EN 437:2003+A1:2009 and EN 16726 "Gas infrastructure - Quality of gas - Group H";
-   vaporized LPG;
-   biomethane, complying with EN 16723 1;
-   vaporized LNG.
NOTE 2   The specification of vaporized LNG is equal to that of natural gas as classified in EN 437:2003+A1:2009.
This European Standard does not cover pipework for hydrogen rich gases that fall outside the definitions within EN 437:2003+A1:2009.
LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure in the liquid state (e.g. between the storage vessel and any pressure regulator).
In this standard, all pressures are gauge pressures unless otherwise stated.
This standard has been harmonized to address the essential safety requirements of the Pressure Equipment Directive (PED, 2014/68/EU [formerly 97/23/EC]) relevant for the joining of gas installation pipework (assemblies) falling within the scope of the PED. These are listed in Annex ZA. However, "this Directive does not cover the assembly of pressure equipment on the site and under the responsibility of the user, as in the case of industrial installations" (PED, Preamble, 7th recital, last paragraph).
Although in this respect, the standard takes into account the essential safety requirements of the PED, no inference can be drawn from this as to whether or not the installation or parts of the installation falls within the scope of the PED. Reference should therefore be made to the PED and relevant national legislation.
This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware (...)

  • Standard
    131 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16940:2016(Main)
Domestic gas installations - Recommendations for safety
SIST-TP CEN/TR 16940:2017

This Technical Report gives recommendations to ensure the quality and safety of domestic gas installations. This Technical Report covers pipe work, appliances installation, their combustion air supply and flue products exhaust commissioning, inspection and maintenance activities carried out by operatives.
This document addresses the following three main factors, which have an influence on gas safety in general:
a)   quality and safety of components of gas installations and gas appliances,
b)   quality of the work when gas installations are constructed and commissioned,
c)   inspection and maintenance of installations and gas appliances.
Potential ways in which individual competence of operatives and/or businesses can be ensured and mutually recognized between Member States are considered.
The means of assuring responsible behaviour of consumers is not covered in this document.
It does not address metering or non-domestic (industrial and commercial) installations.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 13737-2:2014(Main)
Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards
SIST-TP CEN/TR 13737-2:2015

This Technical Report contains, for each country affected, a national page where the relevant national legislation/regulations for the field of gas infrastructure are listed. The national page can further contain the relevant national standards and/or codes of practice and national bodies which can act as further sources of information, if an interested party needs further guidance.
The national page can, if necessary, indicate any requirements in the national legislation/regulations that are more stringent than those in the European Standards prepared by CEN/TC 234. This is done however without giving any details.
This does not apply to requirements contained in clauses that are harmonized to any new approach directive.
This Technical Report is intended to be a guideline for the national implementation of the functional European Standards elaborated by CEN/TC 234 "Gas infrastructure".

  • Technical report
    205 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    209 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16787:2014(Main)
Industrial Gas Installation - Guideline
SIST-TP CEN/TR 16787:2015

This Technical Report applies to safety and operational topics for equipment and pipework systems installed within industrial premises which may be used for process and non-process applications such as Heating, Power Generation, Incineration, etc.
It is applicable to a range of combustible gases used within an industrial environment. The gas plant may include normal combustion with air and/or oxygen, catalytic oxidation or cracking (e.g. as in a refinery).
The user of gas equipment and pipework systems has a responsibility to ensure the safety of the design, of plant operation and plant maintenance.
For piped supplies of gas to a site this Technical Report applies to the system downstream of the ‘point of delivery’. The term, ‘point of delivery’ refers to the isolation valve (or combination of regulator and isolation valve) located before or after the metering station, as will be defined by the particular EU member state national legislation.
The guidance in this Technical Report may also apply to gases generated for the sites own use, such as coke oven gas, site bio-gas plant, site LPG/air plant etc.

  • Technical report
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16388:2012(Main)
Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle
SIST-TP CEN/TR 16388:2013

The gas supply companies, in the widest sense of their activities (production, transport, distribution), have a long tradition in ensuring that networks and facilities are operated according to well-defined procedures. These procedures are the centrepiece of quality management systems. They are based on the general criteria of the series ISO 9000 and are currently being developed gas-specifically as EQAS (European Quality Assurance System) in CEN/TC 234 in order to adhere more efficiently to the procedures peculiar to the gas activities. Companies are more and more inclined to take into account environmental aspects, since the series ISO 14000 resulting in EMAS (Environment Management System) have a similar structure, and the measures to be taken are directly linked to the technical operations and therefore cannot be dissociated from them.
Environmental issues are expected to feature increasingly in CEN standardisation as the European Commission and its affiliated Member States press ahead with an array of proposals for potential directives. These directives are aimed at boosting the reduction of energy consumption, reducing emissions to air/water and, more generally, at forcing industry to consider any process which may have adverse impacts on the environment.
The CEN Sector Forum Gas Infrastructure (CEN/SFG_I) will take this opportunity to demonstrate through EQAS, the effectiveness of gas companies in this area who are continuously looking for the best technologies (although natural gas is by nature an environmentally friendly energy in comparison with other fossil fuels).
Environmental guides are other tools which CEN has introduced through its Technical Board Resolution C108/2000, by requesting the sector forums and their attached Technical Committees to implement the European Commission policy regarding standardisation.
This Technical Report, intended to be used when drafting or reviewing the standards of CEN/TC 234, does not claim to either lay down dedicated requirements for each operation described in each standard nor to set limit values (e.g. emissions) that would be the specific task of the experts in the working group concerned.
Rather, it serves the purpose of triggering an in-depth reflection on the environmental consequences whenever an operative action is planned or being executed. As a way of implementing the basic scheme it was agreed to accommodate the environmental indicators (EIs marked a to i) in the fields of Table 1 (numbered 1 to 49) which match operations/processes with installation/plant. For each field of the Table referenced then by a number and letters, the corresponding requirements are precisely described in Table 2 "Gas-specific Environmental Requirements".

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12327:2012(Main)
Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements
SIST EN 12327:2013

This European Standard describes common principles for pressure testing, commissioning and decommissioning of gas infrastructures as covered by the functional European Standards of the Technical Committee CEN/TC 234, see Annex B. They have been extracted from the detailed codes of practice and operating manuals in the member countries.
This European Standard does not cover installation pipework which is covered by EN 1775.
The specified procedures are applicable to strength testing, tightness testing and combined testing. Test pressure levels, test periods and acceptance criteria are not covered by this European Standard.
Additional measures or different methods of testing, commissioning or decommissioning can be required by legislation of the individual member countries or at the discretion of the pipeline operator.
This European Standard specifies common basic principles for gas infrastructure.  Users of this European Standard should be aware that more detailed national standards and/or code of practice may exist in the CEN member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this European Standard, the national legislation/regulation should take precedence as illustrated in CEN/TR 13737.
CEN/TR 13737 gives:
- clarification of all legislations/regulations applicable in a member state;
- if appropriate, more restrictive national requirements;
- a national contact point for the latest information.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 13737-1:2012(Main)
Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General
SIST-TP CEN/TR 13737-1:2013

This part of the Technical Report contains the definition of "Functional Standardisation" in the context of CEN/TC 234 and explains their relationship with relevant European Directives, national legislation and national standards.  
It is intended as a guideline for the national implementation of the functional European Standards elaborated by CEN/TC 234 "Gas infrastructure".

  • Technical report
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1775:2007(Main)
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
SIST EN 1775:2008

1.1   This standard specifies general recommendations for the design, construction, testing, commissioning, operation and maintenance of installation pipework; pipework between the delivery point of the gas and the inlet connection to the gas appliance.
This standard specifies common basic principles for gas installation pipework.
Users of this European standard need to be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries.
This standard is intended to be applied in association with these national standards and/or codes of practice setting out the above mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this standard, national legislation/regulation takes precedence as illustrated in CEN /TR 13737.
NOTE 1   CEN/TR 13737 contains:   
   - clarification of relevant legislation/regulations applicable in a country;   
   - if appropriate, more restrictive national requirements;   
   - national contact point for the latest information.
This standard applies to:
-   gas installations in residential, commercial and public access building having a maximum operating pressure (MOP) less than or equal to 5 bar;
-   industrial gas installations having a maximum operating pressure (MOP) less than or equal to 0,5 bar.
NOTE 2   For industrial gas installations having a MOP above 0,5 bar, or installations having a MOP above 5 bar, see prEN 15001-1.
This standard is applicable to new installation pipework as well as to replacements of, or extensions to, existing installation pipework.
This standard does not contain detailed recommendations relating to the laying of buried pipework.
NOTE 3     For more information on buried pipework, see EN 12007-1, EN 12007-2 and EN 12007-3.
NOTE 4     For more information on gas pressure regulating installations, see EN 12279.
NOTE 5    For more information on gas metering systems, see EN

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day