Building and civil engineering sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2021)

This document specifies a method for the determination of the influence of water on the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used in joints in buildings and civil engineering works.

Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen nach dem Tauchen in Wasser (ISO 10591:2021)

Dieses Dokument legt ein Verfahren zur Bestimmung des Einflusses von Wasser auf das Haft- und Dehn¬verhalten von Dichtstoffen mit vorwiegend plastischem Verhalten fest, die zur Abdichtung von Fugen im Bauwesen verwendet werden.

Mastics pour bâtiments et ouvrages de génie civil - Détermination des propriétés d'adhésivité/cohésion des mastics après immersion dans l'eau(ISO 10591:2021)

Le présent document spécifie une méthode pour la détermination de l'influence de l'immersion dans l'eau sur les propriétés d'adhésivité/cohésion des mastics de comportement essentiellement plastique qui sont utilisés dans les bâtiments et les ouvrages de génie civil.

Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje adhezijskih/kohezijskih lastnosti po namakanju v vodi (ISO 10591:2021)

Ta dokument določa metodo za ugotavljanje vpliva vode na adhezijske/
kohezijske lastnosti tesnilnih mas, ki se obnašajo pretežno plastično in se uporabljajo za stike v
stavbah in gradbenih inženirskih objektih.

General Information

Status
Published
Publication Date
02-Nov-2021
Withdrawal Date
30-May-2022
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Nov-2021
Completion Date
03-Nov-2021

Relations

Buy Standard

Standard
EN ISO 10591:2022
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2022
Nadomešča:
SIST EN ISO 10591:2005
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje
adhezijskih/kohezijskih lastnosti po namakanju v vodi (ISO 10591:2021)
Building and civil engineering sealants - Determination of adhesion/cohesion properties
of sealants after immersion in water (ISO 10591:2021)
Dichtstoffe im Hoch- und Tiefbau - Bestimmung des Haft- und Dehnverhaltens von
Dichtstoffen nach dem Tauchen in Wasser (ISO 10591:2021)
Mastics pour bâtiments et ouvrages de génie civil - Détermination des propriétés
d'adhésivité/cohésion des mastics après immersion dans l'eau (ISO 10591:2021)
Ta slovenski standard je istoveten z: EN ISO 10591:2021
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10591
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2021
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN ISO 10591:2005
English Version
Building and civil engineering sealants - Determination of
adhesion/cohesion properties of sealants after immersion
in water (ISO 10591:2021)
Mastics pour bâtiments et ouvrages de génie civil - Dichtstoffe im Hoch- und Tiefbau - Bestimmung des
Détermination des propriétés d'adhésivité/cohésion Haft- und Dehnverhaltens von Dichtstoffen nach dem
des mastics après immersion dans l'eau(ISO Tauchen in Wasser (ISO 10591:2021)
10591:2021)
This European Standard was approved by CEN on 17 October 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10591:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10591:2021) has been prepared by Technical Committee ISO/TC 59 "Buildings
and civil engineering works" in collaboration with Technical Committee CEN/SS B02 “Structures” the
secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10591:2005.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10591:2021 has been approved by CEN as EN ISO 10591:2021 without any modification.

INTERNATIONAL ISO
STANDARD 10591
Third edition
2021-10
Building and civil engineering
sealants — Determination of
adhesion/cohesion properties of
sealants after immersion in water
Mastics pour bâtiments et ouvrages de génie civil — Détermination
des propriétés d'adhésivité/cohésion des mastics après immersion
dans l'eau
Reference number
ISO 10591:2021(E)
ISO 10591:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 10591:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Preparation of test specimens . 3
7 Conditioning of test specimens . 4
7.1 General . 4
7.2 Conditioning method A . 4
7.3 Conditioning method B . 4
8 Test procedure .4
9 Expression of results . 4
10 Test report . 5
iii
ISO 10591:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.