EN ISO 19152:2012
(Main)Geographic information - Land Administration Domain Model (LADM) (ISO 19152:2012)
Geographic information - Land Administration Domain Model (LADM) (ISO 19152:2012)
ISO 19152:2012:
defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration (including those over water and land, and elements above and below the surface of the earth);
provides an abstract, conceptual model with four packages related to parties (people and organizations); basic administrative units, rights, responsibilities, and restrictions (ownership rights); spatial units (parcels, and the legal space of buildings and utility networks); spatial sources (surveying), and spatial representations (geometry and topology);
provides terminology for land administration, based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions;
provides a basis for national and regional profiles; and
enables the combining of land administration information from different sources in a coherent manner.
Geoinformation - Land Administration Domain Model (LADM) (ISO 19152:2012)
Information géographique - Modèle du domaine de l'administration des terres (LADM) (ISO 19152:2012)
L'ISO 19152:2012:
définit un modèle de référence du domaine de l'administration des terres (LADM) qui concerne les composants relatifs aux informations de base sur l'administration des terres (y compris ceux qui se trouvent au-dessus de l'eau et des terres, et les éléments situés au-dessus et en dessous de la surface de la Terre);
fournit un modèle conceptuel abstrait composé de quatre paquetages relatifs aux parties (individus et organisations); aux unités administratives de base, droits, responsabilités et restrictions (droits de propriété); aux unités spatiales (parcelles et espace juridique des bâtiments et réseaux publics); aux sources spatiales (relevés topographiques) et représentations spatiales (géométrie et topologie);
propose une terminologie pour l'administration des terres, fondée sur divers systèmes nationaux et internationaux, aussi simple que possible afin d'être utile dans la pratique. La terminologie permet d'obtenir une description commune de différentes pratiques et procédures, officielles ou non, dans diverses juridictions;
propose une base pour les profils nationaux et régionaux et
permet la combinaison cohérente des informations relatives à l'administration des terres issues de différentes sources.
Geografske informacije - Model domene za zemljiško administracijo (LADM) (ISO 19152:2012)
Ta mednarodni standard:
– določa referenčni model domene za zemljiško administracijo (LADM), ki zajema osnovne informacijske komponente zemljiške administracije (vključno s tistimi, ki se nanašajo na vodo in zemljišče, ter elementi nad zemeljskim površjem in pod njim);
– vključuje povzetek, konceptualni model s štirimi svežnji, ki se nanašajo na:
1) strani (osebe in organizacije);
2) osnovne administrativne enote, pravice, obveznosti in omejitve (lastninske pravice);
3) prostorske enote (parcele, pravni prostor zgradb in utilitarne mreže);
4) prostorske vire (meritve) in prostorske prikaze (geometrija in topologija);
– vključuje terminologijo za zemljiško administracijo, ki temelji na številnih nacionalnih in mednarodnih sistemih in je karseda enostavna, da je uporabna v praksi. Terminologija omogoča skupen opis številnih uradnih in neuradnih praks ter postopkov v okviru različnih pravnih pristojnosti;
– zagotavlja podlago za profile na nacionalni in regionalni ravni; ter
– omogoča skladno združevanje informacij s področja zemljiške administracije iz različnih virov.
Naslednje ne spada na področje uporabe tega mednarodnega standarda:
– poseganje v (nacionalno) zakonodajo zemljiške administracije, ki bi lahko imelo pravne posledice;
– vzpostavitev zunanjih podatkovnih zbirk s podatki o straneh, naslovu, vrednotenju, namembnosti zemljišča, pokritosti tal, mreži fizične uporabnosti, arhivu in obdavčitvi. Vendar so v modelu domene za zemljiško administracijo stereotipni razredi za te podatkovne nize, da je prikazano, kateri elementi podatkovnih nizov se v okviru modela domene za zemljiško administracijo pričakujejo od teh zunanjih virov, če so na voljo; in
– modeliranje postopkov zemljiške administracije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2013
Geografske informacije - Model domene za zemljiško administracijo (LADM) (ISO
19152:2012)
Geographic information - Land Administration Domain Model (LADM) (ISO 19152:2012)
Geoinformation - Land Administration Domain Model (LADM) (ISO 19152:2012)
Information géographique - Modèle d'administration du domaine terrestre (LADM) (ISO
19152:2012)
Ta slovenski standard je istoveten z: EN ISO 19152:2012
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 19152
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2012
ICS 35.240.70
English Version
Geographic information - Land Administration Domain Model
(LADM) (ISO 19152:2012)
Information géographique - Modèle du domaine de Geoinformation - Land Administration Domain Model
l'administration des terres (LADM) (ISO 19152:2012) (LADM) (ISO 19152:2012)
This European Standard was approved by CEN on 14 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19152:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 19152:2012) has been prepared by Technical Committee ISO/TC 211 “Geographic
information/Geomatics” in collaboration with Technical Committee CEN/TC 287 “Geographic Information” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the
latest by May 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19152:2012 has been approved by CEN as a EN ISO 19152:2012 without any modification.
INTERNATIONAL ISO
STANDARD 19152
First edition
2012-12-01
Geographic information — Land
Administration Domain Model (LADM)
Information géographique — Modèle du domaine de l’administration
des terres (LADM)
Reference number
ISO 19152:2012(E)
©
ISO 2012
ISO 19152:2012(E)
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 19152:2012(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Conformance .1
3 Normative references.2
4 Terms, definitions, and abbreviations.2
4.1 Terms and definitions .2
4.2 Abbreviations.6
5 Overview of the LADM .7
5.1 Packages and subpackages of the LADM .7
5.2 Basic classes of the LADM.8
5.3 Party Package .9
5.4 Administrative Package.9
5.5 Spatial Unit Package .10
5.6 Surveying and Representation Subpackage .11
6 Content of classes of the LADM and their associations.12
6.1 Introduction.12
6.2 Special classes .12
6.2.1 VersionedObject .12
6.2.2 Fraction.14
6.2.3 Oid.14
6.2.4 LA_Source.15
6.3 Classes of Party Package.16
6.3.1 LA_Party.16
6.3.2 LA_GroupParty .18
6.3.3 LA_PartyMember .18
6.3.4 Code lists for Party Package.18
6.4 Classes of Administrative Package.19
6.4.1 LA_BAUnit.19
6.4.2 LA_RRR .21
6.4.3 LA_Right.22
6.4.4 LA_Restriction .23
6.4.5 LA_Responsibility .23
6.4.6 LA_Mortgage.23
6.4.7 LA_AdministrativeSource.24
6.4.8 LA_RequiredRelationshipBAUnit .24
6.4.9 Code lists for Administrative Package.25
6.5 Classes of Spatial Unit Package .26
6.5.1 LA_SpatialUnit .26
6.5.2 LA_SpatialUnitGroup .27
6.5.3 LA_LegalSpaceBuildingUnit .28
6.5.4 LA_LegalSpaceUtilityNetwork .29
6.5.5 LA_Level.30
6.5.6 LA_RequiredRelationshipSpatialUnit.30
6.5.7 Data types for Spatial Unit Package .31
6.5.8 Code lists for Spatial Unit Package .31
6.6 Classes of Surveying and Representation Subpackage .32
6.6.1 LA_Point.32
6.6.2 LA_SpatialSource.33
ISO 19152:2012(E)
6.6.3 LA_BoundaryFaceString.34
6.6.4 LA_BoundaryFace .35
6.6.5 Data types for Surveying and Representation Subpackage .35
6.6.6 Code lists for Surveying and Representation Subpackage .36
6.7 Associations between classes .38
Annex A (normative) Abstract test suite.40
Annex B (normative) 2D and 3D representations of spatial units.48
Annex C (informative) Instance level cases .50
Annex D (informative) Country profiles .71
Annex E (informative) Spatial units and spatial profiles.82
Annex F (informative) Legal profiles .88
Annex G (informative) The LADM and INSPIRE .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.