iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 598:1994

(Main)

Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings: - operating without pressure, or with positive or negative pressure; - installed below or above ground; - for conveyance of surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in mixed systems.

Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für die Abwasser-Entsorgung - Anforderungen und Prüfverfahren

Diese europäische Norm legt die Anforderungen  und Prüfverfahren fest, die auf duktile Gussrohre, Formstücke, Zubehörteile und ihre Verbindungen anwendbar sind zur Errichtung von Entwässerungs- und Abwasserleitungen ausserhalb von Gebäuden, und zwar: - zum Betrieb als Freispiegelleitung sowie unter positivem oder negativem Druck; - erdverlegt oder oberirdisch verlegt; - zum Transport von Oberflächenwasser, häuslichem Abwasser und bestimmten Arten von Industrieabwässern, entweder im Trenn- oder im Mischwassersystem.

Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour l'assainissement - Prescriptions et méthodes d'essai

La présente norme européenne prescrit les exigences et les méthodes d'essai applicables aux tuyaux, raccords et accessoires en fonte ductile et à leurs assemblages, destinés à la construction de collecteurs et de branchements d'assainissement à l'extérieur des bâtiments: - fonctionnant sans ou avec pression positive ou négative; - installés sur le sol ou en aérien, - pour transporter les eaux de surface, les eaux usées domestiques et certains types d'effluents industriels, en système séparatif ou en système mixte.

Cevi, fitingi in dodatki iz duktilne litine za kanalizacijo - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
29-Sep-1994
Withdrawal Date
02-Oct-2007
ICS
23.040.05 - Pipeline and its parts for external sewage systems
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
Technical Committee
CEN/TC 203 - Cast iron pipes, fittings and their joints
Drafting Committee
CEN/TC 203/WG 2 - Sewerage pipelines
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Oct-2007
Completion Date
03-Oct-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 598:1998 - Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

Relations

Replaced By
EN 598:2007 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
Effective Date
22-Dec-2008

Buy Standard

EN 598:1998EN 598:1998
PreviousNext
Standard
EN 598:1998
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevi, fitingi in dodatki iz duktilne litine za kanalizacijo - Zahteve in postopki preskušanjaRohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für die Abwasser-Entsorgung - Anforderungen und PrüfverfahrenTuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour l'assainissement - Prescriptions et méthodes d'essaiDuctile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods93.030Zunanji sistemi za odpadno vodoExternal sewage systems23.040.40Kovinski fitingiMetal fittings23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 598:1994SIST EN 598:1998en01-oktober-1998SIST EN 598:1998SLOVENSKI
STANDARD



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16017:2010(Main)
Guide to the use of EN 598
SIST-TP CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure;
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
-   explains in more detail the process of testing for the performance tests;
-   explains in more detail the benefits of high alumina cement lining;
-   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
-   explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
-   explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 598:2007+A1:2009(Main + Amendment)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
SIST EN 598:2008+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 598(Main)
Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods
oSIST prEN 598:2017

This European Standard specifies the products characteristics and associated test and assessment methods applicable to coated and lined ductile iron pipes, coated and lined fittings and joints which include (non-exhaustive list) coated and lined accessories such as collar, tees, saddles, bends, tapers, flanged socket.
Intended use: Gravity and pressure drains and sewers:
-   operating without pressure, or with positive or negative pressure;
-   installed below or above ground;
-   for conveyance of surface water, wastewater in separate systems or in combined systems.

  • Draft
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 877 rev(Main)
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
oSIST prEN 877:2012

This European Standard applies to cast iron pipeline components used for the construction of discharge systems for buildings and of drains, normally as gravity systems. The range of nominal sizes extends from DN 40 to DN 600 inclusive. This standard specifies the requirements for the materials, dimensions and tolerances, mechanical properties, appearance, standard coatings  and quality assurance for cast iron pipes, fittings and accessories. It also indicates performance requirements for all components, including joints.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-2:2014(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
SIST EN 1124-2:2014

This European Standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems and specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.
This part of EN 1124 is only valid in connection with EN 1124 1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-4:2013(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
SIST EN 1124-4:2013

This European Standard specifies requirements, dimensions and tolerances for pipes and fittings of longitudinally welded, stainless steel pipe with spigot and socket used for vacuum drainage systems inside and outside buildings and for gravity and vacuum drainage systems on ships and floating maritime structures ) :
-   above freeboard deck as long as the heeling is taken into account in the event of damage when installed above freeboard deck on passenger ships;
-   inside a watertight compartment below freeboard deck;
-   with direct connection to the outboard (not permitted below freeboard deck);
-   inside tanks as long as these are not filled with foreign media and are not cargo tanks.
On well-anchored maritime structures, this European Standard applies to pipes and fittings of longitudinally welded stainless steel pipe with spigot and socket used in drainage systems in the accommodation area.
Pipes and fittings according to this European Standard may also be used in central vacuum cleaning installations, in vacuum suction lifting installations, in chip transporting installations and in other waste water and process pipes as long as the media to be discharged do not damage the components or the health and safety of the personnel.
For other pipes, this European Standard only applies if agreed with the relevant operators and following prior consultation with the manufacturer.
This European Standard contains a designation system for the different types of pipes and fittings for easy identification of each component.
This European Standard is only applicable in conjunction with EN 1124-1.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16017:2010(Main)
Guide to the use of EN 598
SIST-TP CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure;
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
-   explains in more detail the process of testing for the performance tests;
-   explains in more detail the benefits of high alumina cement lining;
-   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
-   explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
-   explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 598:2007+A1:2009(Main + Amendment)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
SIST EN 598:2008+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day