iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16307-5:2023

(Main)

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

This document specifies requirements for the types of industrial trucks specified in the scope of EN ISO 3691-5:2015.
This document is intended to be used in conjunction with EN ISO 3691-5:2015.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant to pedestrian-propelled trucks, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
-   protection against crushing, shearing and trapping;
-   electrical requirements;
-   electromagnetic immunity.
These requirements are supplementary to those stated in EN ISO 3691-5:2015 with the addition of requirements for the following hazard:
-   electromagnetic immunity (external radiation).
This document partially replaces the following requirement of EN ISO 3691-5:2015:
-   electrical requirements.
This document specifies supplementary requirements to EN ISO 3691-5:2015:
-   protection against crushing, shearing and trapping;
-   information for use (instruction handbook and marking).
This document does not specify supplementary requirements to EN ISO 3691-5:2015:
-   static electricity;
-   radiation;
-   general principles for the drafting of instructions;
-   sales literature.
Annex A (informative) contains the list of significant hazards covered by this document.

Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge

Dieses Dokument legt Anforderungen an die im Anwendungsbereich von EN ISO 3691 5:20151 aufgeführten Flurförderzeugtypen fest.
Dieses Dokument ist zur Verwendung mit EN ISO 3691 5:20151 bestimmt.
Dieses Dokument behandelt die folgenden signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, die auf mitgängerbetriebene Flurförderzeuge zutreffen, wenn sie bestimmungsgemäß und unter Bedingungen, die vom Hersteller als Fehlanwendung vernünftigerweise vorhersehbar sind, verwendet werden:
   Schutz vor Quetsch-, Scher- und Einzugsstellen;
   elektrische Anforderungen;
   elektromagnetische Störfestigkeit.
Diese Anforderungen gelten zusätzlich zu denen in EN ISO 3691 5:20151 aufgeführten, wobei Anforderungen für die folgende Gefährdung hinzugefügt wurden:
   elektromagnetische Störfestigkeit (äußere Strahlung).
Dieses Dokument ersetzt teilweise die folgende Anforderung der EN ISO 3691 5:20151:
   elektrische Anforderungen.
Dieses Dokument legt ergänzende Anforderungen zu EN ISO 3691 5:20151 fest:
   Schutz vor Quetsch-, Scher- und Einzugsstellen;
   Benutzerinformationen (Betriebsanleitung und Kennzeichnung).
Dieses Dokument legt keine ergänzenden Anforderungen zu EN ISO 3691 5:20151 fest in Bezug auf:
   statische Elektrizität;
   Strahlung;
   allgemeine Grundsätze für die Abfassung der Betriebsanleitung;
   Verkaufsunterlagen.
Anhang A (informativ) enthält die Liste der signifikanten Gefährdungen, die von diesem Dokument behandelt werden.

Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : Exigences supplémentaires pour les chariots à conducteur accompagnant

Le présent document spécifie des prescriptions pour les types de chariots de manutention spécifiés dans le domaine d’application de l’EN ISO 3691-5:2015.
Le présent document est destiné à être utilisé conjointement avec l’EN ISO 3691-5:2015.
Le présent document traite des phénomènes dangereux, situations dangereuses ou événements dangereux significatifs suivants pour les chariots à conducteur accompagnant, lorsqu'ils sont utilisés comme prévu et dans des conditions de mauvaise utilisation qui sont raisonnablement prévisibles par le fabricant :
-   protection contre l’écrasement, le cisaillement et l’emprisonnement ;
-   prescriptions électriques ;
-   immunité électromagnétique.
Ces prescriptions sont supplémentaires à celles fixées dans l’EN ISO 3691-5:2015 avec l’ajout des prescriptions pour le phénomène dangereux suivant :
-   immunité électromagnétique (rayonnement externe) ;
Le présent document remplace partiellement la prescription suivante de l’EN ISO 3691 5:2015 :
-   prescriptions électriques.
Le présent document spécifie des prescriptions supplémentaires à l’EN ISO 3691-5:2015 :
-   protection contre l’écrasement, le cisaillement et l’emprisonnement ;
-   informations pour l’utilisation.
Le présent document ne spécifie pas de prescriptions supplémentaires à l’EN ISO 3691-5:2015 :
-   électricité statique ;
-   radiation ;
-   principes généraux de rédaction des instructions ;
-   documentation commerciale.
L’Annexe A (informative) contient la liste des phénomènes dangereux significatifs couverts par le présent document.

Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešec

General Information

Status
Published
Publication Date
19-Dec-2023
ICS
53.060 - Industrial trucks
Technical Committee
CEN/TC 150 - Industrial trucks - Safety
Drafting Committee
CEN/TC 150/WG 5 - Pedestrian propelled trucks
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Dec-2023
Due Date
29-Mar-2023
Completion Date
20-Dec-2023
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 16307-5:2024 - Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

Relations

Replaces
EN 16307-5:2013 - Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
Effective Date
19-Jan-2023

Buy Standard

EN 16307-5:2024EN 16307-5:2024
PreviousNext
Standard
EN 16307-5:2024
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
prEN 16307-5:2022prEN 16307-5:2022
PreviousNext
Draft
prEN 16307-5:2022
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16307-5:2024
01-maj-2024
Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne
zahteve za vozila, ki jih poganja pešec
Industrial trucks - Safety requirements and verification - Part 5: Supplementary
requirements for pedestrian-propelled trucks
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5:
Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge
Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : Exigences
supplémentaires pour les chariots à conducteur accompagnant
Ta slovenski standard je istoveten z: EN 16307-5:2023
ICS:
53.060 Industrijski tovornjaki Industrial trucks
SIST EN 16307-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16307-5:2024

---------------------- Page: 2 ----------------------
SIST EN 16307-5:2024


EN 16307-5
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 53.060 Supersedes EN 16307-5:2013
English Version

Industrial trucks - Safety requirements and verification -
Part 5: Supplementary requirements for pedestrian-
propelled trucks
Chariots de manutention - Exigences de sécurité et Flurförderzeuge - Sicherheitstechnische
vérification - Partie 5 : Exigences supplémentaires pour Anforderungen und Verifizierung - Teil 5: Zusätzliche
les chariots à conducteur accompagnant Anforderungen für mitgängerbetriebene
Flurförderzeuge
This European Standard was approved by CEN on 20 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16307-5:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16307-5:2024
EN 16307-5:2023 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Safety requirements and/or protective/risk reduction measures . 7
4.1 General. 7
4.2 Protection against crushing, shearing and trapping . 7
4.2.1 General. 7
4.2.2 Pedestrian-propelled trucks with mast . 7
4.3 Electrical requirements . 7
4.4 Electromagnetic immunity . 7
5 Verification of safety requiremen
...

SLOVENSKI STANDARD
oSIST prEN 16307-5:2022
01-februar-2022
Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne
zahteve za vozila, ki jih poganja pešec
Industrial trucks - Safety requirements and verification - Part 5: Supplementary
requirements for pedestrian-propelled trucks
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5:
Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge
Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : Exigences
supplémentaires pour les chariots à conducteur accompagnant
Ta slovenski standard je istoveten z: prEN 16307-5
ICS:
53.060 Industrijski tovornjaki Industrial trucks
oSIST prEN 16307-5:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16307-5:2022

---------------------- Page: 2 ----------------------
oSIST prEN 16307-5:2022


DRAFT
EUROPEAN STANDARD
prEN 16307-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2021
ICS 53.060 Will supersede EN 16307-5:2013
English Version

Industrial trucks - Safety requirements and verification -
Part 5: Supplementary requirements for pedestrian-
propelled trucks
Chariots de manutention - Exigences de sécurité et Flurförderzeuge - Sicherheitstechnische
vérification - Partie 5 : Exigences supplémentaires pour Anforderungen und Verifizierung - Teil 5: Zusätzliche
les chariots à conducteur accompagnant Anforderungen für mitgängerbetriebene
Flurförderzeuge
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 150.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16307-5:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16307-5:2022
prEN 16307-5:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Safety requirements and/or protective/risk reduction measures . 7
5 Verification of safety requirements and/or protective/risk reduction measures . 8
6 Information for use . 8
Annex A (informative) List of significant hazards . 9
Annex ZA (informative) Relationship between this European Standard and the essential
requiremen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3691-4:2023(Main)
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023)
SIST EN ISO 3691-4:2023

This document specifies safety requirements and the means for their verification for driverless industrial trucks (hereafter referred to as trucks) and their systems.
Examples of driverless industrial trucks (trucks as defined in ISO 5053‑1:2020) include: “automated guided vehicle”, “autonomous mobile robot”, “bots”, “automated guided cart”, “tunnel tugger”, “under cart”, etc.
This document is also applicable to driverless industrial trucks which are provided with:
—    automatic modes which either require operators’ action(s) to initiate or enable such automatic operations;
—    the capability to transport one or more riders (which are neither considered as drivers nor as operators);
—    additional manual modes which allow operators to operate the truck manually; or
—    a maintenance mode which allows manual operation of truck functions for maintenance reasons.
This document is not applicable to trucks solely guided by mechanical means (rails, guides, etc.) or to remotely-controlled trucks, which are not considered to be driverless trucks.
For the purposes of this document, a driverless industrial truck is a powered truck, which is designed to operate automatically. A driverless truck system comprises the control system, which can be part of the truck and/or separate from it, guidance means and power system. Requirements for power sources are not covered in this document.
The condition of the operating zone has a significant effect on the safe operation of the driverless industrial truck. The preparations of the operating zone to eliminate the associated hazards are specified in Annex A.
This document is applicable to all significant hazards, hazardous situations or hazardous events during all phases of the life of the truck (ISO 12100:2010, 5.4), as listed in Annex B, relevant to the applicable machines when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
In particular, this document does not apply to significant hazards related to:
—    noise;
—    vibrations;
—    ionising and non-ionising radiation;
—    laser radiation;
—    sales literature (commercial documents);
—    declaration of vibrations transmitted by mobile machinery.
It does not apply to additional hazards that can occur:
—    during operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
—    during operation in nuclear environments;
—    from trucks intended to operate in public zones (see in particular ISO 13482:2014);
—    during operation on a public road;
—    during operation in potentially explosive environments;
—    during operation in military applications;
—    during operation with specific hygienic requirements;
—    during operation in ionizing radiation environments;
—    during the transportation of (a) person(s) other than (the) intended rider(s);
—    when handling loads the nature of which can lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials);
—    for rider positions with elevation function higher than 1 200 mm from the floor/ground to the platform floor.
This document does not contain safety requirements for trailer(s) being towed behind a truck.
This document does not contain safety requirements for elevated operator trucks.
This document does not apply to trucks manufactured before the date of its publication.

  • Standard
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3691-3:2016/A1:2023(Amendment)
Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads - Amendment 1 (ISO 3691 3:2016/Amd 1:2023)
SIST EN ISO 3691-3:2017/A1:2023

2021-07-26 JF: Through decision 429/2021 taken on 2021-07-08, TC decided to decouple the WI from the EU legislation

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3691-2:2023(Main)
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2023)
SIST EN ISO 3691-2:2023

This document gives safety requirements and the means for their verification for self-propelled industrial variable-reach trucks and variable-reach container handlers/reach stackers as defined in ISO 5053‑1 (hereafter referred to as trucks), equipped with forks or integral load-handling devices for normal industrial duties (e.g. fork arms or means, such as spreaders, for handling containers).
This document does not apply to:
—    rough-terrain variable-reach trucks,
—    rough-terrain variable-reach trucks for handling containers,
—    lorry mounted trucks covered by ISO 20297-1,
—    machines designed primarily for earth-moving (e.g. loaders and dozers), even when their buckets and blades are replaced with forks,
—    machines from which the load can swing freely in all directions.
This document is not applicable to trucks manufactured before the date of its publication.
For the purposes of this document, fork arms and integrated attachments are considered to be a part of the truck, whereas attachments/equipment/tools mounted on the load carrier or on the fork arms which are removable by the user are not. Nevertheless, for interchangeable equipment, which is assembled with the truck by the operator in order to change the function of, or attribute a new function to, the truck, this document does provide requirements for:
—    the interface with the truck,
—    protection of the operator in the normal operating position from crushing and shearing hazards,
—    operating and maintenance instructions,
—    load charts,
—    marking,
—    provision for transportation, and,
—    indicator lights for attachments for lifting containers
Any regional requirements additional to the provisions of this document are addressed in EN 16307-2:2023 and ISO/TS 3691‑8.
This document deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
It does not establish requirements for hazards that can occur:
—    during construction;
—    when using trucks on public roads;
—    when operating in potentially explosive atmospheres;
—    when lifting persons; or
—    during dismantling, disabling and scrapping.
This document does not provide requirements for:
—    tools, lifting accessories or removeable attachments, which do not change the function or attribute a new function, mounted on the load carrier or fork arms;
—    attachments/equipment mounted on the load carrier or on the fork arms which are removable by the user and which change the function or attribute a new function, except as stated above;
—    the reliability of control systems and performance requirements for safety related parts of control systems; or
—    the requirement for fitting an enclosed cab, whether pressurized or not.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16307-2:2023(Main)
Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks
SIST EN 16307-2:2023

This document specifies requirements for the types of industrial trucks specified in the scope of EN ISO 3691-2:2023.
This document is intended to be used in conjunction with EN ISO 3691 2:2023. These requirements are supplementary to those stated in EN ISO 3691-2:2023.
This document deals with the following supplementary requirements and significant hazards, hazardous situations or hazardous events relevant, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
-   electrical requirements;
-   noise emissions;
-   vibration;
-   electromagnetic radiation.
This document specifies supplementary requirements to EN ISO 3691-2:2023:
-   operator's seat;
-   protection against crushing, shearing and trapping;
-   longitudinal stability determination;
-   visibility;
-   information for use (instruction handbook and marking).
Annex A (informative) contains the list of significant hazards covered by this document.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16307-3:2023(Main)
Industrial trucks - Safety requirements and verification - Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)
SIST EN 16307-3

This document specifies requirements for the types of industrial trucks specified in the scope of EN ISO 3691-3:2016.
This document is intended to be used in conjunction with EN ISO 3691-3:2016. These requirements are supplementary to those stated in EN ISO 3691-3:2016.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
-   acceleration, deceleration (kinetic energy);
-   machinery mobility.
This document specifies supplementary requirements to EN ISO 3691-1:2015, EN ISO 3691-3:2016 and EN 16307-1:2020:
-   brakes operation without guidance system;
-   operator fall protection;
-   information for use (instruction handbook and marking).
Annex A (informative) contains the list of significant hazards covered by this document.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1757:2022(Main)
Safety of industrial trucks - Pedestrian propelled industrial platform trucks
SIST EN 1757:2022

This document applies to pedestrian propelled industrial platform trucks as defined in 3.1 with a rated capacity up to and including 500 kg, hereinafter referred to as “trucks” and designed for general purposes.
This document does not apply to:
—   shopping trolleys referred to in EN 1929, Parts 1 to 4 and 7 (CEN/TC 291);
—   roll containers referred to in EN 12674, Parts 1 to 4 (CEN/TC 261);
—   trucks that are intended to be towed by powered vehicles, e.g. milk-run-trains/trailer trains/tugger trains.
This document deals with the technical requirements to minimize the hazards listed in Annex C which can arise during commissioning, operation and maintenance of trucks when carried out in accordance with the specifications as intended by the manufacturer.
This document does not specify the additional requirements for:
—   operation in severe conditions (e.g. extreme environmental conditions such as: freezer applications, high temperatures, corrosive environment);
—   operation subject to special rules (e.g. potentially explosive atmospheres);
—   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/alkalis, radiating materials, especially brittle loads);
—   hazards occurring during construction, transportation, decommissioning and disposal;
—   direct contact with foodstuffs;
—   operation on gradients or on surfaces other than smooth, level, hard surfaces;
—   trucks designed for special applications (e.g., trucks used in hospitals as dinner trollies);
—   trucks fitted with hinged or sliding doors.
Other possible limitations of the scope of other standards referred to that also apply to this document.
Hazards relating to noise, vibration, visibility and static electricity are not dealt with in this document.
This document applies to trucks manufactured after the date of issue.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3691-6:2021(Main)
Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2021)
SIST EN ISO 3691-6:2022

This document gives safety requirements and the means for their verification for self-propelled carriers designed for carrying burdens without lifting, as defined in ISO 5053‑1:2020, and/or personnel carriers, having three or more wheels, a maximum speed not exceeding 56 km/h and a load capacity not exceeding 5 000 kg (hereafter referred to as carriers or trucks).
This document is applicable to trucks equipped with a platform (which can be tilting) for the purpose of carrying materials or with a number of seats for the purpose of transporting passengers.
It is not applicable to:
—    vehicles intended primarily for earth-moving or over-the-road hauling;
—    driverless trucks;
—    pedestrian controlled trucks;
—    golf cars;
—    tractors with a drawbar pull up to and including 20 000 N equipped with a platform for the purpose of carrying materials.
This document deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex A, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document does not deal with hazard due to the risk of break-up during operation.
It does not establish requirements for hazards that can occur when using trucks on public roads or when operating in potentially explosive atmospheres.
It does not establish requirements to provide fire extinguishers.
Regional requirements, additional to the requirements given in this document, are addressed in EN 16307‑6:2014 and ISO/TS 3691‑8:2019.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18063-2:2021(Main)
Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021)
SIST EN ISO 18063-2:2021

This document applies to slewing rough-terrain variable-reach trucks (hereinafter referred to as trucks) as defined in ISO 5053-1:2020, 3.22, that have a specific seated operator’s position, on the left-hand side of the boom, or centre position (excluding operator position on the right side of the boom).
This document specifies a static test method for determining and evaluating the operator’s visibility on a rectangular boundary close around the truck and on a 12 m visibility test circle. Performance requirements for visibility are specified in this document. A calculation method or computer simulation can also be used.
This document does not provide performance requirements for the additional means for indirect visibility.
This document also covers information to be provided by the manufacturer.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1459-9:2021(Main)
Rough-terrain trucks - Safety requirements and verification - Part 9: Variable-reach trucks equipped with work platforms having a front guard that can be opened
SIST EN 1459-9:2021

This document specifies the safety requirements for slewing rough-terrain variable-reach trucks and rough-terrain variable-reach trucks defined by ISO 5053-1 (hereafter referred to as trucks) and their work platforms having front guards that can be opened for removal of roof material (hereafter referred to as work platforms).
This document deals with the significant hazards, hazardous situations and events relevant to the combination of the truck and the integrated work platform when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. The significant hazards covered by this document are listed in Annex A.
NOTE 1 Duplicate controls for the slewing upper structure, the boom and the work platform movements can be also provided under specific circumstances at the operating position in the enclosed cab of the truck.
This document does not address hazards which can occur:
a) when using non-integrated work platforms or other attachments not designed for lifting persons;
b) when handling suspended work platforms which can swing freely;
c) when operating underground or in potentially explosive atmospheres;
d) when removing asbestos, regarding the possible release of fibres.
This document does not specify safety requirements for trucks equipped with work platforms intended for leaving and re-entering at height.
NOTE 2 National regulations for worksites can apply for asbestos removal to cover the risks related to the possible release of fibres.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16842-8:2021(Main)
Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
SIST EN 16842-8:2021

This document specifies the requirements and test procedures for 360° visibility of stand-on counterbalance trucks with a capacity up to and including 10 000 kg in accordance with ISO 5053-1 (herein after referred to as trucks) without a load and it is intended to be used in conjunction with EN 16842-1.
Where specific requirements in this part are modified from the general requirements in EN 16842-1, the requirements of this part are truck-specific and to be used for stand-on counterbalance trucks with a capacity up to and including 10 000 kg.
This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events, relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day