EN 4800-005:2010
(Main)Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy forging stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil 005: Schmiedevormaterial
Diese Norm legt die Anforderungen an die Bestellung, Herstellung, Prüfung, Inspektion und Lieferung von
Schmiedevormaterial aus Titan und Titanlegierungen fest. Sie ist anzuwenden, wenn sie bei Verweisung auf
oder in Verbindung mit der EN-Werkstoffnorm erwähnt wird, sofern in der Zeichnung, Bestellung oder der
Prüfanweisung nichts anderes angegeben ist.
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 005 : Produits destinés à la forge
Cette Norme européenne définit les exigences relatives aux commandes, fabrication, essais, contrôles et livraison des produits destinés à la forge en titane et alliages de titane. La présente norme est applicable lorsqu'elle est citée dans la norme de matériaux EN et conjointement avec celle-ci sauf instruction contraire figurant sur le plan, la commande ou la fiche d’essai.
Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 005. del: Material za kovanje
Ta standard določa zahteve za naročanje, proizvodnjo, preskušanje, pregledovanje in dobavo materiala za kovanje iz titana in titanovih zlitin. Uporablja se, kadar se nanaša na standard EN za materiale in skupaj z njim, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NRYDQMHLuft- und Raumfahrt - Titan und Titanlegierungen Kneterzeugnisse - Technische Lieferbedingungen - Teil 005: SchmiedevormaterialSérie aérospatiale - Titane et alliages de titane - Spécification technique — Partie 005: Produits destinés à la forgeAerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 4800-005:2010SIST EN 4800-005:2012en01-januar-2012SIST EN 4800-005:2012SLOVENSKI
STANDARD
SIST EN 4800-005:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4800-005
November 2010 ICS 49.025.30 English Version
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 005: Produits destinés à la forge
Luft- und Raumfahrt - Titan und Titanlegierungen Kneterzeugnisse - Technische Lieferbedingungen - Teil 005: Schmiedevormaterial This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4800-005:2010: ESIST EN 4800-005:2012
EN 4800-005:2010 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .64Wording of order .75Health and safety .76Technical requirements .7SIST EN 4800-005:2012
EN 4800-005:2010 (E) 3 Foreword This document (EN 4800-005:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.