Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for external thermal insulation composite kits with renders (ETIC kits)

This document specifies equipment and procedures for determining the tensile strength and elongation of rectangular and triaxial glass fibre meshes which are used for the reinforcement of the base coat in external thermal insulation composite kits with renders (ETIC kits).

Wärmedämmstoffe für das Bauwesen - Bestimmung der mechanischen Eigenschaften von Glasfasergewebe als Armierung für außenseitige Wärmedämm-Verbundsysteme mit Putz (WDVS)

Dieses Dokument legt Prüfeinrichtungen und Verfahren zum Bestimmen der Zugfestigkeit und der Dehnung von rechteckigen und triaxialen Glasfasergeweben fest, die für die Armierung des Unterputzes von außenseitigen Wärmedämm-Verbundsystemen mit Putz (WDVS) verwendet werden.

Produits isolants thermiques pour le bâtiment - Détermination des caractéristiques mécaniques des treillis de fibres de verre servant à renforcer les kits de systèmes composites d’isolation thermique par l’extérieur (kits ETIC) avec des enduits

Le présent document spécifie l’équipement et les modes opératoires pour déterminer la résistance à la traction et l’allongement de treillis de fibres de verre rectangulaires et triaxiaux servant à renforcer la couche de base des kits de systèmes composites d’isolation thermique par l’extérieur (kits ETIC) avec des enduits.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje mehanskih lastnosti mrežice iz steklenih vlaken kot armature za kompozitne komplete zunanje toplotne izolacije z ometom (ETIC kompleti)

General Information

Status
Not Published
Publication Date
25-Jun-2023
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
28-May-2023
Due Date
10-Sep-2022
Completion Date
28-May-2023

Relations

Buy Standard

Draft
prEN 13496:2021
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13496:2021
01-december-2021
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje mehanskih
lastnosti mrežice iz steklenih vlaken kot armature za kontaktne fasadne
toplotnoizolacijske sisteme z ometi (ETICS)
Thermal insulation products for building applications - Determination of the mechanical
properties of glass fibre meshes as reinforcement for External Thermal Insulation
Composite Systems with renders (ETICS)
Wärmedämmstoffe für das Bauwesen - Bestimmung der mechanischen Eigenschaften
von Glasfasergewebe als Armierung für außenseitige Wärmedämm-Verbundsysteme mit
Putz (WDVS)
Produits isolants thermiques pour le bâtiment - Détermination des caractéristiques
mécaniques des treillis de fibres de verre servant à renforcer les systèmes composites
disolation thermique par lextérieur (ETICS) avec des enduits
Ta slovenski standard je istoveten z: prEN 13496
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
oSIST prEN 13496:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13496:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13496:2021


DRAFT
EUROPEAN STANDARD
prEN 13496
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2021
ICS 91.100.60 Will supersede EN 13496:2013
English Version

Thermal insulation products for building applications -
Determination of the mechanical properties of glass fibre
meshes as reinforcement for External Thermal Insulation
Composite Systems with renders (ETICS)
Produits isolants thermiques pour le bâtiment - Wärmedämmstoffe für das Bauwesen - Bestimmung
Détermination des caractéristiques mécaniques des der mechanischen Eigenschaften von Glasfasergewebe
treillis de fibres de verre servant à renforcer les als Armierung für außenseitige Wärmedämm-
systèmes composites d ¿isolation thermique par l Verbundsysteme mit Putz (WDVS)
extérieur (ETICS) avec des enduits
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 88.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13496:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13496:2021
prEN 13496:2021 (E)
Contents Page
European Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.