EN ISO 8340:2005

Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005)

ISO 8340:2005 specifies a method for the determination of the tensile properties at maintained extension of sealants used in joints in building construction.

Hochbau - Fugendichtstoffe - Bestimmung des Zugverhaltens unter Vorspannung (ISO 8340:2005)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Zugverhaltens von Dichtstoffen unter Vorspannung fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.
ANMERKUNG   Ein Verfahren zur Bestimmung des Zugverhaltens (Dehnung bis zum Bruch) ist in ISO 8339 festgelegt.

Construction immobilière - Mastics - Détermination des propriétés de déformation sous traction maintenue (ISO 8340:2005)

L'ISO 8340:2005 spécifie une méthode de détermination des propriétés de déformation sous traction maintenue des mastics utilisés pour les joints dans la construction immobilière.

Gradnja objektov – Lepila - Tesnilne mase - Ugotavljanje nateznih lastnosti pri vzdrževanem raztezku (ISO 8340:2005)

General Information

• Status: Published
• Publication Date: 14-Jun-2005
• Withdrawal Date: 30-Dec-2005
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/SS B02 - Structures
• Drafting Committee: CEN/SS B02 - Structures
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jun-2005
• Completion Date: 15-Jun-2005
• Ref Project: SIST EN ISO 8340:2005 - Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8340:2005
01-september-2005
1DGRPHãþD
SIST EN 28340:1996
Gradnja objektov – Lepila - Tesnilne mase - Ugotavljanje nateznih lastnosti pri
vzdrževanem raztezku (ISO 8340:2005)
Building construction - Sealants - Determination of tensile properties at maintained
extension (ISO 8340:2005)
Hochbau - Fugendichtstoffe - Bestimmung des Zugverhaltens unter Vorspannung (ISO
8340:2005)
Construction immobiliere - Mastics - Détermination des propriétés de déformation sous
traction maintenue (ISO 8340:2005)
Ta slovenski standard je istoveten z: EN ISO 8340:2005
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 8340:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8340:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 8340:2005



EUROPEAN STANDARD
EN ISO 8340

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2005
ICS 91.100.50 Supersedes EN 28340:1990
English version
Building construction - Sealants - Determination of tensile
properties at maintained extension (ISO 8340:2005)
Construction immobilière - Mastics - Détermination des Hochbau - Fugendichtstoffe - Bestimmung des
propriétés de déformation sous traction maintenue (ISO Zugverhaltens unter Vorspannung (ISO 8340:2005)
8340:2005)
This European Standard was approved by CEN on 25 May 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8340:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8340:2005

EN ISO 8340:2005 (E)





Foreword


This document (EN ISO 8340:2005) has been prepared by Technical Committee ISO/TC 59
"Building construction" in collaboration with CMC.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2005, and conflicting national
standards shall be withdrawn at the latest by December 2005.

This document supersedes EN 28340:1990.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 8340:2005 has been approved by CEN as EN ISO 8340:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8340:2005


INTERNATIONAL ISO
STANDARD 8340
Second edition
2005-06-15


Building construction — Sealants —
Determination of tensile properties at
maintained extension
Construction immobilière — Mastics — Détermination des propriétés de
déformation sous traction maintenue




Reference number
ISO 8340:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 8340:2005
ISO 8340:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to
...