Impact attenuating playground surfacing - Methods of test for determination of impact attenuation

This European Standard specifies the test apparatus and the impact test methods for determining the impact attenuation of surfacing by measuring the acceleration experienced during impact. Test apparatus in compliance with this standard are applicable to tests carried out in a laboratory or on site by either methods described.
NOTE   The test methods described in this standard are also applicable for impact areas required in other standards than for playground equipment, e.g. for outdoor fitness equipment and parkour equipment.

Stoßdämpfende Spielplatzböden - Prüfverfahren zur Bestimmung der Stoßdämpfung

No scope available.

Sols d'aires de jeux absorbant l'impact - Méthodes d'essai pour la détermination de l'atténuation de l'impact

No scope available

Podloge otroških igrišč, ki ublažijo udarce - Ugotavljanje kritične višine padca - Dopolnilo A1

General Information

Status
Not Published
Publication Date
30-Jun-2024
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
28-Jun-2023
Due Date
30-Jun-2023
Completion Date
28-Jun-2023

Relations

Buy Standard

Draft
EN 1177:2018+AC:2019/oprA1:2022
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1177:2018+AC:2019/oprA1:2022
01-marec-2022

Podloge otroških igrišč, ki ublažijo udarce - Ugotavljanje kritične višine padca -

Dopolnilo A1

Impact attenuating playground surfacing - Methods of test for determination of impact

attenuation
Stoßdämpfende Spielplatzböden - Prüfverfahren zur Bestimmung der Stoßdämpfung

Sols d'aires de jeux absorbant l'impact - Méthodes d'essai pour la détermination de

l'atténuation de l'impact
Ta slovenski standard je istoveten z: EN 1177:2018+AC:2019/prA1:2022
ICS:
97.200.40 Igrišča Playgrounds
SIST EN en,fr,de
1177:2018+AC:2019/oprA1:2022

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1177:2018+AC:2019/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN 1177:2018+AC:2019/oprA1:2022
DRAFT
EUROPEAN STANDARD
EN 1177:2018+AC:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2022
ICS 97.200.40
English Version
Impact attenuating playground surfacing - Methods of test
for determination of impact attenuation

Sols d'aires de jeux absorbant l'impact - Méthodes Stoßdämpfende Spielplatzböden - Prüfverfahren zur

d'essai pour la détermination de l'atténuation de Bestimmung der Stoßdämpfung
l'impact

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.

This draft amendment A1, if approved, will modify the European Standard EN 1177:2018+AC:2019. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN

worldwide for CEN national Members. 1177:2018+AC:2019/prA1:2022:2022 E
---------------------- Page: 3 ----------------------
SIST EN 1177:2018+AC:2019/oprA1:2022
EN 1177:2018+AC:2019/prA1:2021 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Modification to clause 3 ................................................................................................................................ 4

2 Modification to 5.2.1 ...................................................................................................................................... 4

3 Addition of clause 5.3, “On site testing conditions” ............................................................................ 4

4 Modification to 6.1.1 ...................................................................................................................................... 4

5 Modification to Clause 6.1.2 ........................................................................................................................ 4

Table 1 — HIC values ................................................................................................................................................... 5

6 Modification to Clause 6.2.3.3 .................................................................................................................... 5

7 Modifications to 6.2.3.2................................................................................................................................. 5

8 Modification of 6.2.4.1 ................................................................................................................................... 5

9 Modification to 6.2.4.2................................................................................................................................... 5

10 Modification to 6.2.4.3................................................................................................................................... 6

11 Modification to 6.2.4.4................................................................................................................................... 6

12 Modification to 6.2.4.5.2 ............................................................................................................................... 6

13 Modifications to 6.3 ........................................................................................................................................ 6

14 Modification to 7.2 .......................................................................................................................................... 6

15 Modification to 8.2 .......................................................................................................................................... 6

16 Modification to 8.3 .......................................................................................................................................... 7

17 Modification to 8.4 .......................................................................................................................................... 7

18 Modification to Annex B ............................................................................................................................... 7

19 Modifications to Annex C .............................................................................................................................. 7

20 Modification to Table D1 .............................................................................................................................. 8

21 Addition of new Annex G .............................................................................................................................. 8

Annex G (Informative) “History of HIC testing of impact attenuating surfaces for

playgrounds and variations in test results” .......................................................................................... 8

---------------------- Page: 4 ----------------------
SIST EN 1177:2018+AC:2019/oprA1:2022
EN 1177:2018+AC:2019/prA1:2022 (E)
European foreword

This document (EN 1177:2018+AC:2019/prA1:2022) has been prepared by Technical Committee

CEN/TC 136 “Sports, playground and other recreational equipment”, the secretariat of which is held by

DIN.
This document is currently submitted to the CEN Enquiry.
---------------------- Page: 5 ----------------------
SIST EN 1177:2018+AC:2019/oprA1:2022
EN 1177:2018+AC:2019/prA1:2022 (E)
1 Modification to clause 3
In definition 3.9, replace the note to entry with the following:

“The number of drops and the drop heights of drop tests are specified separately in Method 1 and in

Method 2. Particularities exist for some specific types of surfacing material (e.g. for loose fil material the

four impacts measurement of the drop test are conduct in a different test position).”

2 Modification to 5.2.1
Change the beginning of the note to read as follows:
“NOTE Requirements for the adequate level of impact attenuation […].”
3 Addition of clause 5.3, “On site testing conditions”
Move the text in 6.3 to become a new clause 5.3.
“5.3 On site testing conditions

5.3.1 Testing shall only be carried out when the temperature of the surface is between 5 °C and 55 °C.

Temperature as well as all relevant climatic conditions existing throughout the test, e.g. humidity,

moisture, etc., shall be measured and recorded.

5.3.2 Testing shall not be carried out on surfaces that are saturated with water.

5.3.3 Tests shall not be conducted on a test zone if it is inclined at an angle of > 10° to the horizontal.

NOTE Guided systems will give invalid results on inclined surfaces and free falling head forms can experience

excessive rotation
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.