EN 2465:2007

Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm

This standard specifies the requirements relating to:
Steel FE-PA3901 (X2CrNi18-9)
Softened
450 MPa ≤ Rm ≤ 680 MPa
Bar for machining
4 mm ≤ De ≤ 100 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PA3901 (X2CrNi18-9) - Weichgeglüht - 450 MPa ≤ Rm ≤ 680 MPa - Stangen zur spanenden Bearbeitung - 4 mm ≤ De ≤ 100 mm

Série aérospatiale - Acier FE-PA3901 (X2CrNi18-9) - Adouci - 450 MPa ≤ Rm ≤ 680 MPa - Barres pour usinage - 4 mm ≤ De ≤ 100 mm

Aeronavtika - Jeklo FE-PA3901 (X2CrNi18-9) - Mehčano - 450 MPa <= Rm <= 680 MPa - Palice za obdelavo - 0,4 mm <= De <= 100 mm

General Information

• Status: Withdrawn
• Publication Date: 09-Oct-2007
• Withdrawal Date: 03-Sep-2019
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Sep-2019
• Ref Project: SIST EN 2465:2008 - Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa <= Rm <= 680 MPa - Bar for machining - 0,4 mm <= De <= 100 mm

Relations

• Replaced By: EN 2465:2019 - Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bars for machining - 4 mm ≤ De ≤ 100 mm
• Effective Date: 11-Sep-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa <= Rm <= 680 MPa - Bar for machining - 0,4 mm <= De <= 100 mmSérie aérospatiale - Acier FE-PA3901 (X2CrNi18-9) - Adouci - 450 MPa <= Rm <= 680 MPa - Barres pour usinage - 0,4 mm <= De <= 100 mmLuft- und Raumfahrt - Stahl FE-PA3901 (X2CrNi18-9) - Weichgeglüht - 450 MPa <= Rm <= 680 MPa - Stangen zur spanenden Bearbeitung - 0,4 mm <= De <= 100 mmTa slovenski standard je istoveten z:EN 2465:2007SIST EN 2465:2008en49.025.10ICS:SLOVENSKI
STANDARDSIST EN 2465:200801-februar-2008







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2465
October 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm
Série aérospatiale - Acier FE-PA3901 (X2CrNi18-9) - Adouci - 450 MPa ≤ Rm ≤ 680 MPa - Barres pour usinage -4 mm ≤ De ≤ 100 mm
Luft- und Raumfahrt - Stahl FE-PA3901 (X2CrNi18-9) - Weichgeglüht - 450 MPa ≤ Rm ≤ 680 MPa - Stangen zur spanenden Bearbeitung - 4 mm ≤ De ≤ 100 mm This European Standard was approved by CEN on 23 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2465:2007: E



EN 2465:2007 (E) 2 Foreword This document (EN 2465:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2008, and conflicting national standards shall be withdrawn at the latest by April 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of t
...