EN ISO 15011-4:2006

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2006)

ISO 15011-4:2006 covers health and safety in welding and allied processes.
ISO 15011-4:2006 specifies requirements for determination of the emission rate and chemical composition of welding fume in order to prepare fume data sheets..
It applies to all filler materials used for joining or surfacing by arc welding using a manual, partly mechanised or fully automatic process, depositing unalloyed steel, alloyed steel and non-ferrous alloys. Manual metal arc welding, gas-shielded metal arc welding with solid wires, metal-cored and flux-cored wires and arc welding with self-shielded flux-cored wires are included within the scope of ISO 15011-4:2006.

Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren - Laborverfahren zum Sammeln von Rauch und Gasen - Teil 4: Rauchdatenblätter (ISO 15011-4:2006)

Dieser Teil der ISO 15011 schließt den Arbeits- und Gesundheitsschutz beim Schweißen und verwandten Verfahren mit ein. Er legt Anforderungen zur Bestimmung der Emissionsrate und der chemischen Zusammensetzung von Schweißrauch fest, um Rauchdatenblätter zu erstellen.
Er gilt für Schweißzusatzwerkstoffe zum Verbinden oder Plattieren durch Lichtbogenschweißen unter Verwendung eines manuellen, teilweise maschinellen oder vollständig automatischen Prozesses, bei dem entweder unlegierter Stahl, legierter Stahl oder Nichteisenlegierungen abgeschmolzen werden. Lichtbogenhandschweißen, Metall-Schutzgasschweißen mit Massiv-, Metallkern- und Fülldrahtelektrode und Metall-Lichtbogenschweißen mit Fülldrahtelektrode ohne Schutzgas sind im Anwendungsbereich dieses Teiles der ISO 15011 enthalten.

Hygiène et sécurité en soudage et techniques connexes - Méthode de laboratoire d'échantillonnage des fumées et des gaz - Partie 4: Fiches d'information sur les fumées (ISO 15011-4:2006)

L'ISO 15011-4:2006 couvre l'hygiène et la sécurité en soudage et techniques connexes. Elle spécifie les exigences relatives à la détermination des taux d'émission et à la composition chimique des fumées de soudage dans le but de préparer des fiches d'information sur les fumées.
L'ISO 15011-4:2006 s'applique à tous les métaux d'apport utilisés pour l'assemblage ou le rechargement par soudage à l'arc utilisant un procédé manuel, partiellement mécanisé ou entièrement automatisé déposant un acier non allié, un acier allié et des alliages non ferreux. Le soudage manuel à l'arc avec électrodes enrobées, le soudage à l'arc avec fil plein sous protection gazeuse, le soudage à l'arc avec fil fourré sous protection gazeuse et le soudage à l'arc avec fil fourré autoprotecteur sont inclus dans le domaine d'application de l'ISO 15011-4:2006.

Zdravje in varnost pri varjenju in podobnih postopkih - Laboratorijska metoda za vzorčenje dima in plinov, nastalih pri obločnem varjenju - 4. del: Prikaz podatkov o dimih (ISO 15011-4:2006)

General Information

• Status: Withdrawn
• Publication Date: 14-Mar-2006
• Withdrawal Date: 06-Feb-2018
• ICS: 13.100 - Occupational safety. Industrial hygiene
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 9 - Health and safety in welding and allied processes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Feb-2018
• Ref Project: SIST EN ISO 15011-4:2006 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2006)

Relations

• Replaced By: EN ISO 15011-4:2018 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017)
• Effective Date: 14-Feb-2018
• Amended By: EN ISO 15011-4:2006/A1:2008 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets - Amendment 1 (ISO 15011-4:2006/Amd 1:2008)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15011-4:2006
01-julij-2006
=GUDYMHLQYDUQRVWSULYDUMHQMXLQSRGREQLKSRVWRSNLK/DERUDWRULMVNDPHWRGD]D
Y]RUþHQMHGLPDLQSOLQRYQDVWDOLKSULREORþQHPYDUMHQMXGHO3ULND]SRGDWNRYR
GLPLK,62
Health and safety in welding and allied processes - Laboratory method for sampling fume
and gases - Part 4: Fume data sheets (ISO 15011-4:2006)
Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren -
Laborverfahren zum Sammeln von Rauch und Gasen - Teil 4: Rauchdatenblätter (ISO
15011-4:2006)
Hygiene et sécurité en soudage et techniques connexes - Méthode de laboratoire
d'échantillonnage des fumées et des gaz - Partie 4: Fiches d'information sur les fumées
(ISO 15011-4:2006)
Ta slovenski standard je istoveten z: EN ISO 15011-4:2006
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 15011-4:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15011-4:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 15011-4:2006
EUROPEAN STANDARD
EN ISO 15011-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 25.160.10; 13.100

English Version
Health and safety in welding and allied processes - Laboratory
method for sampling fume and gases - Part 4: Fume data sheets
(ISO 15011-4:2006)
Hygiène et sécurité en soudage et techniques connexes - Arbeits- und Gesundheitsschutz beim Schweißen und bei
Méthode de laboratoire d'échantillonnage des fumées et verwandten Verfahren - Laborverfahren zum Sammeln von
des gaz - Partie 4: Fiches d'information sur les fumées Rauch und Gasen, die beim Lichtbogenschweißen erzeugt
(ISO 15011-4:2006) werden - Teil 4: Rauchdatenblätter (ISO 15011-4:2006)
This European Standard was approved by CEN on 9 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15011-4:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15011-4:2006

EN ISO 15011-4:2006 (E)





Foreword


This document (EN ISO 15011-4:2006) has been prepared by Technical Committee CEN/TC
121 "Welding", the secretariat of which is held by DIN, in collaboration with Technical Committee
ISO/TC 44 "Welding and allied processes".

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2006, and conflicting national
standards shall be withdrawn at the latest by September 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


2

---------------------- Page: 4 ----------------------

SIST EN ISO 15011-4:2006


INTERNATIONAL ISO
STANDARD 15011-4
First edition
2006-03-15


Health and safety in welding and allied
processes — Laboratory method for
sampling fume and gases —
Part 4:
Fume data sheets
Hygiène et sécurité en soudage et techniques connexes — Méthode de
laboratoire d'échantillonnage des fumées et des gaz —
Partie 4: Fiches d'information sur les fumées




Reference number
ISO 15011-4:2006(E)
©
ISO 2006

---------------------- Page: 5 ----------------------

SIST EN ISO 15011-4:2006
ISO 15011-4:2006(E)
PDF disclaimer
This PDF file
...