EN 13165:2012
(Main)Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
This European Standard specifies the requirements for factory made rigid polyurethane foam (PU) products, with or without facings or coatings, which are used for the thermal insulation of buildings. PU includes both PIR and PUR products. The products are manufactured in the form of boards.
Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non conflicting standards.
Products with a declared thermal resistance lower than 0,25 m2 . K/W or a declared thermal conductivity greater than 0,060 W/(m.K) at 10 °C are not covered by this European Standard.
This standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14308).
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Polyurethan-Hartschaum (PU) - Spezifikation
Diese Europäische Norm legt die Anforderungen an werkmäßig hergestellte Produkte aus Polyurethan-
Hartschaum (PU) mit oder ohne Kaschierung oder Beschichtung fest, die für die Wärmedämmung von
Gebäuden benutzt werden. PU umfasst sowohl PIR- als auch PUR-Produkte. Die Produkte werden in Form
von Platten hergestellt.
Die in dieser Norm beschriebenen Produkte werden auch in vorgefertigten Wärmedämmsystemen und
Mehrschicht-Platten angewendet. Die Eigenschaften von Systemen, in die diese Produkte integriert sind,
werden nicht behandelt.
Die vorliegende Norm beschreibt die Produkteigenschaften und enthält die Prüfverfahren und Festlegungen
für die Konformitätsbewertung, die Kennzeichnung und die Etikettierung.
Diese Norm legt keine Leistungsstufen für eine vorgegebene Eigenschaft fest, die ein Produkt erreichen
muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Die für bestimmte Anwendungen benötigten
Stufen können Regelwerken oder nicht entgegenstehenden Normen entnommen werden.
Diese Europäische Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes niedriger
als 0,25 m2⋅K/W oder deren Nennwert der Wärmeleitfähigkeit größer als 0,060 W/(m⋅K) bei 10 °C ist.
Die vorliegende Norm gilt weder für in situ-Dämmprodukte noch für Produkte, die zur Dämmung von haustechnischen
und betriebstechnischen Anlagen (durch EN 14308 abgedeckt) vorgesehen sind.
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse rigide de polyuréthane (PU) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés en mousse rigide de polyuréthanne (PU), avec ou sans parements ou enduits de finition, utilisés pour l'isolation thermique des bâtiments. Le PU comprend les produits PIR et PUR. Les produits sont fabriqués sous forme de panneaux.
Les produits couverts par la présente norme sont également utilisés dans des systèmes d'isolation thermique et dans des panneaux composites préfabriqués ; les performances des systèmes incorporant ces produits ne sont pas définies.
La présente norme décrit les caractéristiques des produits et contient des modes opératoires d'essai, d'évaluation de la conformité, de marquage et d'étiquetage.
La présente norme ne spécifie pas, pour une propriété donnée, le niveau exigé que doit atteindre un produit pour démontrer son aptitude à l'emploi dans une application particulière. Les niveaux requis pour une application donnée figurent dans les réglementations ou normes non conflictuelles.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,25 m2K/W ou dont la conductivité thermique déclarée à une température de 10 °C est supérieure à 0,060 W/(mK) ne relèvent pas du domaine d'application de la présente Norme européenne.
Les produits isolants mis en œuvre in situ et les produits destinés à être utilisés pour l'isolation des équipements du bâtiment et des installations industrielles ne relèvent pas du domaine d'application de la présente norme (couverts par l’EN 14308).
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz trde poliuretanske pene (PUR) - Specifikacija
Ta evropski standard določa zahteve za površinsko obdelane ali lakirane ali površinsko neobdelane ali nelakirane proizvode iz trde poliuretanske pene (PU), ki se uporabljajo za toplotno izolacijo stavb. PU zajema proizvode PIR in PUR. Proizvodi so izdelani v obliki plošč. Proizvodi iz tega standarda se uporabljajo tudi v predizdelanih sistemih toplotne izolacije in vezanih ploščah; lastnosti sistemov iz teh proizvodov niso opisane. Ta standard opisuje lastnosti proizvodov ter zajema postopke za preskušanje, vrednotenje skladnosti, označevanje in etiketiranje. Ta standard ne določa zahtevane ravni določene lastnosti, ki jo mora proizvod doseči, da se dokaže njegova primernost namenu za posamezno vrsto uporabe. Zahtevane ravni za posamezno uporabo so določene v uredbah ali standardih, ki niso v nasprotju s tem standardom. Proizvodi z deklarirano toplotno upornostjo, nižjo od 0,25 m² K/W, ali deklarirano toplotno prevodnostjo, višjo od 0,060 W/mK pri 10 °C, v tem evropskem standardu niso zajeti. Ta standard ne zajema toplotnoizolacijskih proizvodov, izdelanih na kraju samem, ter proizvodov za izolacijo gradbene opreme in industrijskih napeljav (zajema jih standard EN 14308).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz trde poliuretanske pene (PUR) - SpecifikacijaWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Polyurethan-Hartschaum (PU) – SpezifikationProduits isolants thermiques pour le bâtiment - Produits manufacturés en mousse rigide de polyuréthane (PU) - SpécificationThermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13165:2012SIST EN 13165:2013en,fr,de01-marec-2013SIST EN 13165:2013SLOVENSKI
STANDARDSIST EN 13165:20091DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13165
November 2012 ICS 91.100.60 Supersedes EN 13165:2008English Version
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse rigide de polyuréthane (PU) - Spécification
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Polyurethan-Hartschaum (PU) - SpezifikationThis European Standard was approved by CEN on 6 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13165:2012: ESIST EN 13165:2013
2Contents
Page Foreword . 41Scope . 62Normative references . 63Terms, definitions, symbols, units and abbreviated terms . 73.1Terms and definitions . 73.2Symbols, units and abbreviated terms . 84Requirements . 104.1General . 104.2For all applications . 114.3For specific applications . 135Test methods . 175.1Sampling . 175.2Conditioning . 175.3Testing . 176Designation code . 207Evaluation of conformity . 217.1General . 217.2Initial type testing . 217.3Factory production control . 228Marking and labelling . 22Annex A (normative)
Determination of the declared values of thermal resistance and thermal conductivity . 23A.1General . 23A.2Input data . 23A.3Declared values . 23Annex B (normative)
Initial type testing (ITT) and factory production control (FPC) . 25Annex C (normative)
Determination of the aged values of thermal resistance and
thermal conductivity . 29C.1General . 29C.2Sampling and test specimen preparation . 29C.3Determination of the initial value of thermal conductivity . 30C.4Determination of the accelerated aged value of thermal conductivity . 31C.5Fixed increment procedure . 33C.6Declaration of the aged values of thermal resistance and thermal conductivity . 35Annex D (normative)
PU multi-layered insulation products . 36D.1General . 36D.2Requirements . 36D.3Test methods . 37D.4Evaluation of conformity . 37Annex E (informative)
Additional properties . 38E.1General . 38E.2Bending strength . 38E.3Shear behaviour . 38E.4Compressive stress at 2% deformation . 38E.5Long term water absorption by diffusion . 38E.6Freeze-thaw resistance . 38E.7Apparent density . 39SIST EN 13165:2013
3Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 40ZA.1Scope and relevant characteristics . 40ZA.2Procedures for attestation of conformity of factory made rigid polyurethane foam products . 42ZA.3CE Marking and labelling . 46Bibliography . 48 Tables Table 1 — Tolerances on length and width . 11Table 2 — Classes for thickness tolerances . 12Table 3 — Deviation from flatness . 12Table 4 — Test conditions for dimensional stability under specified temperature and humidity conditions . 13Table 5 — Levels for dimensional stability for test conditions 1, 2, 3 . 13Table 6 — Levels for dimensional stability for test condition 4 . 14Table 7 — Levels for deformation under specified compressive load and temperature conditions . 14Table 8 — Levels for compressive stress or compressive strength . 15Table 9 — Levels for tensile strength perpendicular to faces . 15Table 10 — Levels for one sided wetting behaviour . 16Table 11 — Test methods, test specimens and conditions . 19Table A.1 — Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 24Table B.1 — Minimum number of tests for ITT and minimum product testing frequencies . 25Table B.2 — Minimum product testing frequencies for the reaction to fire characteristics . 27Table C.1 — Safety increments to be added to the measured accelerated aged value of thermal conductivity . 32Table C.2 — Increments for calculating the aged value of thermal conductivity . 34Table E.1 — Test methods, test specimens, conditions and minimum testing frequencies . 39Table ZA.1 — Relevant clauses for factory made rigid Polyurethane foam products and intended use . 41Table ZA.2 — Systems of attestation of conformity . 42Table ZA.3.1 — Assignment of evaluation of conformity tasks for products under system 1 for reaction to fire and system 3 for other characteristics . 43Table ZA.3.2 — Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire . 44 Figures Figure C.1 — Flow chart of the alternative ageing procedures . 30Figure ZA.1 — Example CE marking information . 47
4Foreword This document (EN 13165:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13165:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Compared with EN 13165:2008, the main changes are: a) better harmonisati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.