EN 755-2:2016

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

This European Standard specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 755 1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573 3.

Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 2: Mechanische Eigenschaften

Diese Europäische Norm legt die Grenzwerte für die mechanischen Eigenschaften von stranggepressten Stangen, Rohren und Profilen aus Aluminium und Aluminiumlegierungen fest.
Die Technischen Lieferbedingungen, einschließlich Erzeugnis- und Prüfanforderungen, sind in EN 755 1 festgelegt. Die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert. In der EN 573-3 sind die Grenzen der chemischen Zusammensetzung für diese Werkstoffe angegeben.

Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2 : Caractéristiques mécaniques

La présente Norme européenne spécifie les limites des caractéristiques mécaniques provenant de l’essai de traction applicables aux barres, tubes et profilés filés en aluminium et alliages d’aluminium.
Les conditions techniques de contrôle et de livraison, y compris les produits et les exigences d’essai, sont spécifiées dans l'EN 755-1. Les désignations des états métallurgiques sont définies dans l'EN 515. Les limites de composition chimique de ces matériaux sont données dans l'EN 573-3.

Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del: Mehanske lastnosti

Ta evropski standard določa omejitve mehanskih lastnosti, ki so posledica nateznega preskusa, ki se uporablja za iztiskane palice/drogove, cevi ter profile iz aluminija in aluminijevih zlitin.
Tehnični pogoji za pregled in dobavo, vključno z zahtevami glede izdelkov in preskušanja, so določeni v standardu EN 755-1. Oznake za popuščanje so opredeljene v standardu EN 515. Omejitve kemijske sestave za te materiale so podane v standardu EN 573-3.

General Information

• Status: Published
• Publication Date: 15-Mar-2016
• Withdrawal Date: 29-Sep-2016
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 5 - Extruded and drawn products
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 04-Nov-2022
• Ref Project: SIST EN 755-2:2016 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

Relations

• Replaces: EN 755-2:2013 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
• Effective Date: 23-Mar-2016
• Revised: EN 755-2:2024 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2016
1DGRPHãþD
SIST EN 755-2:2014
Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del:
Mehanske lastnosti
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2:
Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2 :
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 755-2:2016
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 755-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 77.150.10 Supersedes EN 755-2:2013
English Version
Aluminium and aluminium alloys - Extruded rod/bar, tube
and profiles - Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Barres, tubes et Aluminium und Aluminiumlegierungen -
profilés filés - Partie 2 : Caractéristiques mécaniques Stranggepresste Stangen, Rohre und Profile - Teil 2:
Mechanische Eigenschaften
This European Standard was approved by CEN on 10 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 755-2:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Mechanical property limits . 4
3.1 General . 4
3.2 Elongation . 4
3.3 Reference list of the tables of mechanical properties of the relevant aluminium and
aluminium alloys . 5
3.4 Tables of mechanical properties . 7
Annex A (informative) List of tempers used in Tables 1 to 61 (extract of EN 515) . 56
Bibliography . 58

European foreword
This document (EN 755-2:2016) has been prepared by Technical Committee CEN/TC 132 “Aluminium
and aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 755-2:2013.
CEN/TC 132 decided to revise EN 755-2:2013 as follows:
— reorganization of the list of the tables of mechanical properties of the relevant aluminium and
aluminium alloys;
— addition of the alloy EN AW-2618A [AlCu2Mg1,5Ni] in a new Table 9;
— correction of the alloy EN AW-6026 [Al MgSiBi] in a new Table 36;
— addition of the alloy EN AW-6056 [Al Si1MgCuMn] in a new Table 38.
— Modification of the Alloy EN AW-6060 [Al MgSi] in Table 39: Extruded profile T6 and T66 wall
thickness-border from 3 mm to 5 mm;
— Modification of the Alloy EN AW-6063 [Al Mg0,7Si] in Table 45: Extruded profile T5 wall thickness-
border from 3 mm to 10 mm;
— The former Table 26 was moved, and is now Table 48.
EN 755, Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles comprises the following
parts:
— Part 1: Technical conditions for inspection and delivery
— Part 2: Mechanical properties
— Part 3: Round bars, tolerances on dimensions and form
— Part 4: Square bars, tolerances on dimensions and form
— Part 5: Rectangular bars, tolerances on dimensions and form
— Part 6: Hexagonal bars, tolerances on dimensions and form
— Part 7: Seamless tubes, tolerances on dimensions and form
— Part 8: Porthole tubes, tolerances on dimensions and form
— Part 9: Profiles, tolerances on dimensions and form
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Scope
This European Standard specifies the mechanical property limits resulting from tensile testing
applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are
specified in EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for
these materials are given in EN 573-3.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 755-1, Aluminium and aluminium alloys- Extruded rod/bar, tube and profiles - Part 1: Technical
conditions for inspection and delivery
EN ISO 6892-1, Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO
6892-1)
3 Mechanical property limits
3.1 General
The mechanical properties shall be in conformity with those specified in Table 1 to Table 61 or those
agreed upon between supplier and purchaser and stated in the order document.
Table 1 to Table 61 contain limits of mechanical property values obtained by tensile testing according to
EN ISO 6892-1 after sampling and test piece preparation according to EN 755-1.
NOTE The mechanical properties refer to test pieces taken in the longitudinal direction. Mechanical
properties of test pieces taken in other directions can differ from those for the longitudinal direction quoted in
this standard.
Brinell hardness values given in Table 1 to Table 61 expressed as HBW values are for information only.
3.2 Elongation
If not otherwise agreed, the A value shall be used.
The A value for elongation is the % elongation measured over a gauge length of 5,65 S (where S is
o
o
the initial cross-sectional area of the test-piece), and expressed in percent.
For certain products the supplier may choose (if not otherwise specified in the order documents) to use
the elongation based on A Consequently, values for the A are included in the following tables.
50mm. 50mm
The A value is the elongation measured over a gauge length of 50 mm and expressed in percent.
50mm
Test pieces and their location in the specimen are given in EN 755-1.
3.3 Reference list of the tables of mechanical properties of the relevant aluminium and
aluminium alloys
Page
Table 1 Aluminium EN AW-1050A [Al 99,5] 7
Table 2 Aluminium EN AW-1070A [Al 99,7] 7
Table 3 Aluminium EN AW-1200 [Al 99,0] 8
Table 4 Aluminium EN AW-1350 [Al 99,5] 8
Table 5 Alloy EN AW-2007 [Al Cu4PbMgMn] 9
Table 6 Alloy EN AW-2011 and EN AW-2011A [Al Cu6BiPb] and [Al Cu6BiPb(A)] 9
Table 7 Alloy EN AW-2014 and EN AW-2014A [Al Cu4SiMg] and [Al Cu4SiMg(A)] 10
Table 8 Alloy EN AW-2017A [Al Cu4MgSi(A)] 11
Table 9 Alloy EN AW-2618A [AlCu2Mg1,5Ni] 12
Table 10 Alloy EN AW-2024 [Al Cu4Mg1] 13
Table 11 Alloy EN AW-2030 [Al Cu4PbMg] 14
Table 12 Alloy EN AW-3102 [Al Mn0,2] 15
Table 13 Alloy EN AW-3003 [Al Mn1Cu] 16
Table 14 Alloy EN AW-3103 [Al Mn1] 17
Table 15 Alloy EN AW-5005 and EN AW-5005A [Al Mg1(B)] and [Al Mg 1(C)] 18
Table 16 Alloy EN AW-5019 [Al Mg5] 19
Table 17 Alloy EN AW-5049 [Al Mg2Mn0,8] 20
Table 18 Alloy EN AW-5051A [Al Mg2] 20
Table 19 Alloy EN AW-5251 [Al Mg2Mn0,3] 21
Table 20 Alloy EN AW-5052 [Al Mg2,5] 22
Table 21 Alloy EN AW-5154A [Al Mg3,5(A)] 23
Table 22 Alloy EN AW-5454 [Al Mg3Mn] 24
Table 23 Alloy EN AW-5754 [Al Mg3] 25
Table 24 Alloy EN AW-5083 [Al Mg4,5Mn0,7] 26
Table 25 Alloy EN AW-5086 [Al Mg4] 27
Table 26 Alloy EN AW-6101A [AI MgSi(A)] 27
Table 27 Alloy EN AW-6101B [AI MgSi(B)] 28
Table 28 Alloy EN AW-6005 and EN AW-6005A [Al SiMg] and [Al SiMg(A)] 29
Table 29 Alloy EN AW-6106 [Al MgSiMn] 30
Table 30 Alloy EN AW-6008 [Al SiMgV] 30
Table 31 Alloy EN AW-6110A [Al Mg0,9Si0,9MnCu(A)] 31
Table 32 Alloy EN AW-6012 [Al MgSiPb] 32
Page
Table 33 Alloy EN AW-6014 [Al Mg0,6SiV] 33
Table 34 Alloy EN AW-6018 [Al Mg1SiPbMn] 34
Table 35 Alloy EN AW-6023 [Al Si1Sn1MgBi] 34
Table 36 Alloy EN AW-6026 [AI MgSiBi] 35
Table 37 Alloy EN AW-6351 [Al Si1Mg0,5Mn] 36
Table 38 Alloy EN AW-6056 [Al Si1MgCuMn] 37
Table 39 Alloy EN AW-6060 [Al MgSi] 38
Table 40 Alloy EN AW-6360 [Al SiMgMn] 39
Table 41 Alloy EN AW-6061 [AI Mg1SiCu] 40
Table 42 Alloy EN AW-6261 [Al Mg1SiCuMn] 41
Table 43 Alloy EN AW-6262 [Al Mg1SiPb] 42
Table 44 Alloy EN AW-6262A [Al Mg1SiSn] 42
Table 45 Alloy EN AW-6063 [Al Mg0,7Si] 43
Table 46 Alloy EN AW-6063A [AI Mg0,7Si(A)] 44
Table 47 Alloy EN AW-6463 [Al Mg0,7Si(B)] 45
Table 48 Alloy EN AW-6064A [AI Mg1SiBi] 46
Table 49 Alloy EN AW-6065 [Al Mg1Bi1Si] 46
Table 50 Alloy EN AW-6081 [Al Si0,9MgMn] 47
Table 51 Alloy EN AW-6082 [Al Si1MgMn] 48
Table 52 Alloy EN AW-6182 [Al Si1MgZr] 49
Table 53 Alloy EN AW-7003 [Al Zn6Mg0,8Zr] 49
Table 54 Alloy EN AW-7005 [Al Zn4,5Mg1,5Mn] 50
Table 55 Alloy EN-AW-7108 [Al Zn5Mg1Zr] 50
Table 56 Alloy EN-AW-7108A [Al Zn5Mg1Zr(A)] 51
Table 57 Alloy EN AW-7020 [AI Zn4,5Mg1] 52
Table 58 Alloy EN AW-7021 [Al Zn5,5Mg1,5] 52
Table 59 Alloy EN AW-7022 [Al Zn5Mg3Cu] 53
Table 60 Alloy EN AW-7049A [Al Zn8MgCu] 54
Table 61 Alloy EN AW-7075 [Al Zn5,5MgCu] 55
3.4 Tables of mechanical properties
Table 1 — Aluminium EN AW-1050A [Al 99,5]
Extruded rod/bar
Dimensions R R A A
m p0,2 50 mm
Hardness
Temper mm MPa MPa % %
Typical value
HBW
a b
min. min.
D S min. max. min. max.
c
F , H112 all all 60 - 20 - 25 23 20
O, H111 all all 60 95 20 - 25 23 20
Extruded tube
Wall thickness R R A A
m p0,2 50 mm
Hardness
Temper t MPa MPa % %
Typical value
HBW
mm min. max. min. max. min. min
c
F , H112 all 60  20 - 25 23 20
O, H111 all 60 95 20 - 25 23 20
Extruded profile
Wall thickness R R A A
m p0,2 50 mm
Hardness
Temper t MPa MPa % %
Typical value
HBW
mm min. min
min. max. min. max.
c
F , H112 all 60  20 - 25 23 20
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for information only.
Table 2 — Aluminium EN AW-1070A [Al 99,7]
Extruded rod/bar
Dimensions R R A A
m p0,2 50 mm
Hardness
Temper mm MPa MPa % %
Typical value
HBW
a b
D S min. max. min. max. min. min.
c
F , H112 all all 60 - 23  25 23 18
Extruded tube
Not specified
Extruded profile
Not specified
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for information only.
Table 3 — Aluminium EN AW-1200 [Al 99,0]
Extruded rod/bar
Dimensions R R
m p0,2 A A
50 mm
Hardness
Temper mm MPa MPa
% %
Typical value
HBW
a b
min. min.
D S min. max. min. max.
c
F , H112 all all 75 - 25 - 20 18 23
Extruded tube
Wall thickness
R R A A
m p0,2 50 mm
Hardness
Temper
t MPa MPa % %
Typical value
HBW
mm min. max. min. max. min. min.
c
F , H112 all all 75 - 25  20 18 23
Extruded profile
Wall thickness
R R A A
m p0,2 50 mm
Hardness
Temper t MPa MPa % %
Typical value
HBW
mm min. max. min. max. min. min.
c
F ,
...