FprEN 4529-003

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard

This document specifies the required characteristics of sealing plugs, class T, for use in elements of electrical and optical connection containing cable (wire) sealing grommets, according to EN 4529-002. It is used together with EN 4529-001.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Verschluß-Stopfen - Teil 003: Klasse T - Produktnorm

Série aérospatiale - Organes de connexion électrique et optique - Obturateurs d’étanchéité - Partie 003 : Classe T - Norme de produit

Le présent document spécifie les caractéristiques requises des obturateurs d'étanchéité, de classe T, utilisés dans les organes de connexion électrique et optique contenant des passe-fils étanches, selon l’EN 4529-002. Il doit être utilisé conjointement avec l’EN 4529-001.

Aeronavtika - Elementi električnih in optičnih povezav - Tesnilni čepi - 003. del: Razred T - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 14-Dec-2023
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Ref Project: kSIST FprEN 4529-003:2023 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard

Relations

• Revises: EN 4529-003:2006 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4529-003:2021
01-september-2021
Aeronavtika - Elementi električnih in optičnih povezav - Tesnilni čepi - 003. del:
Razred T - Standard za proizvod
Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part
003: Class T - Product standard
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Verschluß-
Stopfen - Teil 003: Klasse T - Produktnorm
Série aérospatiale - Organes de connexion electrique et optique - Obturateur
d’étanchéité - Partie 003 : Classe T - Norme de produit
Ta slovenski standard je istoveten z: prEN 4529-003
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4529-003:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4529-003:2021

---------------------- Page: 2 ----------------------
oSIST prEN 4529-003:2021


DRAFT
EUROPEAN STANDARD
prEN 4529-003
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2021
ICS 49.060 Will supersede EN 4529-003:2006
English Version

Aerospace series - Elements of electrical and optical
connection - Sealing plugs - Part 003: Class T - Product
standard
Série aérospatiale - Organes de connexion electrique et Luft- und Raumfahrt - Elektrische und optische
optique - Obturateur d'étanchéité - Partie 003 : Classe Verbindungselemente - Verschluß-Stopfen - Teil 003:
T - Norme de produit Klasse T - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4529-003:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4529-003:2021
prEN 4529-003:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Specific characteristics . 5
4.2 Dimensions – Mass, colours . 5
4.3 Material . 5
4.4 Dimensions and mass .
...