EN ISO 1580:1994

Slotted pan head screws - Product grade A (ISO 1580:1994)

Specifies the characteristics of slotted pan head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Flachkopfschrauben mit Schlitz - Produktklasse A (ISO 1580:1994)

Diese Norm enthält Festlegungen über Flachkopfschrauben mit Schlitz, in Produktklasse A, mit Gewinde von M 1,6 bis M 10. Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z. B. ISO 262, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Vis à métaux à tête cylindrique large, fendue - Grade A (ISO 1580:1994)

La présente Norme internationale prescrit les caractéristiques des vis à métaux à tête cylindrique large fendue, de filetage M1,6 à M10 inclus et de grade A. Si dans des cas particuliers, des spécifications autres que celles figurant dans la présente Norme internationale sont requises, il est recommandé de les prendre dans les Normes internationales existantes, par exemple ISO 261, ISO 888, ISO 898-1, ISO 965-2 et ISO 3506.

Vijaki z zarezano nizko valjasto glavo - Razred izdelave A

General Information

• Status: Withdrawn
• Publication Date: 04-Jul-1994
• Withdrawal Date: 31-Aug-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2011
• Completion Date: 01-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 1580:1996 - Slotted pan head screws - Product grade A (ISO 1580:1994)

Relations

• Replaced By: EN ISO 1580:2011 - Slotted pan head screws - Product grade A (ISO 1580:2011)
• Effective Date: 18-Sep-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1580:1996
01-april-1996
Vijaki z zarezano nizko valjasto glavo - Razred izdelave A
Slotted pan head screws - Product grade A (ISO 1580:1994)
Flachkopfschrauben mit Schlitz - Produktklasse A (ISO 1580:1994)
Vis a métaux a tete cylindrique large, fendue - Grade A (ISO 1580:1994)
Ta slovenski standard je istoveten z: EN ISO 1580:1994
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 1580:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1580:1996

---------------------- Page: 2 ----------------------

SIST EN ISO 1580:1996

---------------------- Page: 3 ----------------------

SIST EN ISO 1580:1996

---------------------- Page: 4 ----------------------

SIST EN ISO 1580:1996

---------------------- Page: 5 ----------------------

SIST EN ISO 1580:1996

---------------------- Page: 6 ----------------------

SIST EN ISO 1580:1996
INTERNATIONAL IS0
STANDARD 1580
Second edition
1994-04-01
Slotted pan head screws - Product
grade A
V’is zi m&aux 9 t&e cylindrique large fendue - Grade A
Reference number
IS0 1580: 1994(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 1580:1996
IS0 1580:1994(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(I EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 1580 was prepared by Technical Committee
!SO/TC 2, Fasteners.
This second edition cancels and replaces the first edition
(IS0 1580:1983), which has been technically revised.
0 IS0 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 8 ----------------------

SIST EN ISO 1580:1996
IS0 1580:1994(E)
INTERNATIONAL STANDARD 0 IS0
Slotted pan head screws - Product grade A
1 Scope
This International Standard specifies the characteristics of slotted pan head screws of product grade A and with
threads from Ml ,6 to Ml 0 inclusive.
If, in special cases, specifications other than those listed in this International Standard are required, they should
be selected from existing International Standards, for example IS0 261, IS0 888, IS0 898-1, IS0 965-2 and
IS0 3506.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject to
revision, and parties to agreements based on this International Standard are encouraged to investigate the possi-
bility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain
registers of currently valid International Standards.
IS0 225:1983, Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions
I SO 261: 1973, IS0 general purpose metric screw threads - General plan.
Nominal lengths, and thread lengths for general purpose bolts
IS0 888:1976, Bolts, screws and studs -
IS0 898-l : 1988, Mechanical properties of fasteners - Part I: Bolts, screws and studs.
Part 2: Limits of sizes for general
IS0 965-2: 1980, IS0 general purpose metric screw threads - Tolerances -
purpose bolt and nut threads - Medium quality.
IS0 3269: 1988, Fasteners - Acceptance inspection.
IS0 3506:1979, Corrosion-resistant stainless steel fasteners - Specifications.
I SO 4042: 1989, Threaded components - Electroplated coatings.
IS0 4759-l :1978, Tolerances for fasteners - Part 1: Bolts, screws and nuts with thread diameters between I,6
(inclusive) and 150 mm (inclusive) and product grades A, B and C.
IS0 6157-I :1988, Fasteners - Surface discontinuities - Part I: Bolts, screws and studs for general
requirements.
IS0 8839: 1986, Mechanical properties of fastener
...