Metallic industrial piping - Part 2: Materials

This document specifies the requirements for steel products used for industrial piping and supports.
For some metallic materials other than steel, such as spheroidal graphite cast iron, aluminium, nickel, copper, titanium, requirements are or will be formulated in separate parts of this document.
For metallic materials which are not covered by a harmonized material standard and are not likely to be in near future, specific rules are given in this part or the above cited parts of this document.

Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe

Dieses Dokument legt die Anforderungen an Stahlprodukte für industrielle Rohrleitungen und deren Halterungen fest.
Für einige metallische Werkstoffe außer Stahl, wie z. B. Gusseisen mit Kugelgraphit, Aluminium, Nickel, Kupfer und Titan, sind oder werden die Anforderungen in den einzelnen Teilen dieses Dokuments festgelegt.
Für metallische Werkstoffe, die nicht nach einer Werkstoffnorm harmonisiert sind und es auch in naher Zukunft nicht sein werden, sind spezielle Regeln in diesem Teil oder in den aufgeführten Teilen dieses Dokuments enthalten.

Tuyauteries industrielles métalliques - Partie 2: Matériaux

La présente Norme européenne spécifie les exigences pour les produits en acier utilisés pour les tuyauteries industrielles et supports.
Pour certains matériaux métalliques autres que l'acier, tels que la fonte à graphite sphéroïdal, l'aluminium, le nickel, le cuivre, le titane, les exigences sont ou seront spécifiées dans des parties distinctes de la présente Norme européenne.
Pour les matériaux métalliques qui ne sont pas couverts par une norme harmonisée de matériaux et qui ne le seront probablement pas dans un avenir proche, des règles spécifiques sont données dans cette partie ou dans les parties citées ci-dessus de la présente Norme européenne.

Kovinski industrijski cevovodi - 2. del: Materiali

General Information

Status
Published
Publication Date
23-Jul-2024
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Jul-2024
Due Date
09-Aug-2024
Completion Date
24-Jul-2024

Relations

Buy Standard

Standard
EN 13480-2:2024
English language
85 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2024
Nadomešča:
SIST EN 13480-2:2018
SIST EN 13480-2:2018/A1:2018
SIST EN 13480-2:2018/A2:2018
SIST EN 13480-2:2018/A3:2018
SIST EN 13480-2:2018/A7:2020
SIST EN 13480-2:2018/A8:2021
Kovinski industrijski cevovodi - 2. del: Materiali
Metallic industrial piping - Part 2: Materials
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Tuyauteries industrielles métalliques - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13480-2:2024
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13480-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 23.040.01 Supersedes EN 13480-2:2017
English Version
Metallic industrial piping - Part 2: Materials
Tuyauteries industrielles métalliques - Partie 2: Metallische industrielle Rohrleitungen - Teil 2:
Matériaux Werkstoffe
This European Standard was approved by CEN on 9 July 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-2:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions, symbols and units . 9
4 Requirements for materials to be used for pressure containing parts in industrial piping . 11
5 Requirements for materials to be used for non-pressure parts . 15
Annex A (normative) Grouping system for steels for pressure equipment . 16
Annex B (normative) Requirements for prevention of brittle fracture at low temperatures . 18
B.1 General . 18
B.2 Material selection and impact energy requirements . 19
B.2.1 General . 19
B.2.2 Method 1 – Code of practice . 19
B.2.3 Method 2 . 28
B.2.4 Method 3 — Fracture mechanics analysis . 40
B.3 General test requirements . 41
B.3.1 General . 41
B.3.2 Sub-sized specimens . 42
B.4 Welds . 43
B.4.1 General . 43
B.4.2 Welding procedure qualification . 43
B.4.3 Production test plates . 43
B.5 Materials for use at elevated temperatures . 43
B.5.1 General . 43
B.5.2 Materials . 43
B.5.3 Welding procedure qualification and production test plates . 43
B.5.4 Start up and shut down procedure . 44
B.5.5 Pressure test . 44
Annex C (normative) Provisional technical delivery conditions for clad products for pressure
purposes . 52
C.1 Introduction . 52
C.2 Requirements for the base material . 52
C.3 Requirements for the cladding material . 52
C.4 Qualification of the cladding procedure . 53
C.5 Production tests . 54
Annex D (informative) European steels for pressure purposes . 56
D.1 European Standards for steels and steel components for pressure purposes . 56
D.2 European standardised steels grouped according to product forms . 57
Annex E (normative) Special provisions for materials and components . 80
E.1 General . 80
E.2 Mechanical properties and technical delivery conditions for fasteners in accordance with
EN ISO 3506-1:2020 and/or EN ISO 3506-2:2020 . 80
E.2.1 Mechanical properties for austenitic bolts in accordance with EN ISO 3506-1:2020 . 80
E.2.2 Delivery conditions for austenitic bolts . 80
Annex Y (informative) History of EN 13480-2 . 82
Y.1 Differences between EN 13480-2:2017 and EN 13480-2:2024 . 82
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU aimed to be covered . 83
Bibliography . 84

European foreword
This document (EN 13480-2:2024) has been prepared by Technical Committee CEN/TC 267 “Industrial piping
and pipelines”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2024, and conflicting national standards shall be withdrawn
at the latest by December 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13480-2:2017.
This new edition incorporates the Amendments which have been approved previously by CEN members, and
the corrected pages up to Issue 3 without any further technical change. Annex Y provides details of significant
technical changes between this European Standard and the previous edition.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this document.
This European Standard EN 13480 for metallic industrial piping consists of eight interdependent and not
dissociable Parts which are:
— Part 1: General;
— Part 2: Materials;
— Part 3: Design and calculation;
— Part 4: Fabrication and installation;
— Part 5: Inspection and testing;
— Part 6: Additional requirements for buried piping;
— CEN/TR 13480-7, Guidance on the use of conformity assessment procedures;
— Part 8: Additional requirements for aluminium and aluminium alloy piping.
Although these Parts may be obtained separately, it should be recognized that the Parts are inter-dependant.
As such the manufacture of metallic industrial piping requires the application of all the relevant Parts in order
for the requirements of the Standard to be satisfactorily fulfilled.
This European Standard will be maintained by a Maintenance MHD working group whose scope of working is
limited to corrections and interpretations related to EN 13480. The contact to submit queries can be found at
https://unm.fr/en/maintenance-agencies/maintenance-agency-en-13480/. A form for submitting questions
can be downloaded from the link to the MHD website. After subject experts have agreed an answer, the answer
will be communicated to the questioner. Interpretation sheets will be posted on the website of the MHD.
Amendments to this new edition may be issued from time to time and then used immediately as alternatives
to rules contained herein. These amendments will be consolidated within EN 13480:2024 in accordance with
the maintenance system of EN 13480 series approved by CEN/BT Decision C172/2021.
Any feedback and questions on this document should be directed to the users’ national standards body. A
complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia,
Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United Kingdom.
1 Scope
This document specifies the requirements for steel products used for industrial piping and supports.
For some metallic materials other than steel, such as spheroidal graphite cast iron, aluminium, nickel, copper,
titanium, requirements are or will be formulated in separate parts of this document.
For metallic materials which are not covered by a harmonized material standard and are not likely to be in
near future, specific rules are given in this part or the above cited parts of this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 764-1:2015+A1:2016, Pressure equipment — Part 1: Vocabulary
EN 1092-1:2018, Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN
designated — Part 1: Steel flanges
EN 1515-4:2021, Flanges and their joints — Bolting — Part 4: Selection of bolting for equipment subject to the
Pressure Equipm
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.