Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and noncementitious site-applied materials

This document specifies a procedure to determine the migration of substances from non-metallic and non-cementitious site-applied materials for use in contact with water intended for human consumption.
It is applicable to site-applied materials intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from these materials after their application on site.
The document is applicable to materials whose physical or chemical properties alter during or after on-site application, such as coatings, paints, and adhesives. In addition, some site-applied materials that do not change in such a manner, e.g. greases or lubricants, are also included.

Einfluss von Materialien auf Trinkwasser - Einfluss infolge der Migration - Teil 2: Prüfverfahren für vor Ort aufgebrachte nicht metallische und nicht zementgebundene Materialien

Dieses Dokument legt ein Verfahren zur Bestimmung der Migration von Stoffen aus vor Ort aufgebrachten nicht metallischen und nicht zementgebundenen Materialien fest, die für die Verwendung in Kontakt mit dem für den menschlichen Gebrauch bestimmten Wasser vorgesehen sind.
Es gilt für vor Ort aufgebrachte Materialien, die zum Einsatz unter unterschiedlichen Bedingungen für den Transport und die Speicherung von für den menschlichen Gebrauch bestimmtem Wasser, einschließlich von Rohwasser, das für die Herstellung von für den menschlichen Gebrauch bestimmtem Wasser verwendet wird, vorgesehen sind. Es behandelt die Extraktion von Bestandteilen aus diesen Materialien durch Wasser nach ihrer Aufbringung vor Ort.
Dieses Dokument ist auf Materialien anwendbar, deren physikalische oder chemische Eigenschaften sich bei oder nach der Aufbringung vor Ort ändern, wie z. B. Beschichtungsstoffe, Anstrichstoffe und Klebstoffe. Außerdem sind auch einige vor Ort aufgebrachte Materialien enthalten, die sich nicht auf diese Art und Weise verändern, wie z. B. Schmierfette oder Schmierflüssigkeiten.

Influence des matériaux en contact sur l’eau destinée à la consommation humaine - Influence due à la migration - Partie 2 : Méthode d’essai des matériaux appliqués sur site, excepté les matériaux métalliques et ceux à base de ciment

Le présent document spécifie une méthode de détermination de la migration de substances à partir de matériaux appliqués sur site, utilisés en contact avec l’eau destinée à la consommation humaine, à l’exception des matériaux métalliques et de ceux à base de ciment.
Il s’applique à des matériaux appliqués sur site utilisés dans diverses conditions pour le transport et le stockage de l’eau destinée à la consommation humaine, y compris les eaux brutes pour la production d’eau destinée à la consommation humaine. Il traite de la migration dans l’eau de constituants issus de ces matériaux après que ceux ci aient été appliqués sur site.
Le présent document s’applique aux matériaux dont les propriétés physiques ou chimiques se modifient pendant ou après leur application sur site, tels que les enduits, peintures et adhésifs. De plus, sont également inclus certains matériaux appliqués sur site qui ne se modifient pas, comme les graisses ou les lubrifiants.

Vpliv materiala na pitno vodo - Vpliv migracije - 2. del: Metoda preskušanja nekovinskih in necementnih materialov

Ta dokument določa postopek za ugotavljanje migracije snovi iz nekovinskih in necementnih materialov, ki so pri uporabi v stiku s pitno vodo.
Uporablja se za materiale na kraju samem, namenjene uporabi v različnih pogojih za prevoz in shranjevanje pitne vode, vključno z neobdelano vodo, ki se uporablja za pripravo pitne vode. Zajema vodno ekstrakcijo snovi iz teh materialov, uporabljenih na kraju samem.
Dokument se uporablja za materiale, katerih fizikalne ali kemične lastnosti se spremenijo med nanosom na mestu uporabe ali po njem, kot so premazi, barve in lepila. Uporablja se tudi za nekatere druge materiale na kraju samem, ki se ne spreminjajo na tak način, npr. masti ali maziva.

General Information

Status
Published
Publication Date
14-Dec-2021
Withdrawal Date
29-Jun-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Dec-2021
Due Date
29-Dec-2021
Completion Date
15-Dec-2021

Relations

Buy Standard

Standard
EN 12873-2:2022
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2022
Nadomešča:
SIST EN 12873-2:2005
Vpliv materiala na pitno vodo - Vpliv migracije - 2. del: Metoda preskušanja
nekovinskih in necementnih materialov
Influence of materials on water intended for human consumption - Influence due to
migration - Part 2: Test method for non-metallic and noncementitious site-applied
materials
Einfluss von Materialien auf Trinkwasser - Einfluss infolge der Migration - Teil 2:
Prüfverfahren für vor Ort aufgebrachte nicht metallische und nicht zementgebundene
Materialien
Influence des matériaux en contact sur l’eau destinée à la consommation humaine -
Influence due à la migration - Partie 2 : Méthode d’essai des matériaux appliqués sur
site, excepté les matériaux métalliques et ceux à base de ciment
Ta slovenski standard je istoveten z: EN 12873-2:2021
ICS:
13.060.20 Pitna voda Drinking water
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 12873-2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2021
EUROPÄISCHE NORM
ICS 13.060.20; 67.250 Supersedes EN 12873-2:2005
English Version
Influence of materials on water intended for human
consumption - Influence due to migration - Part 2: Test
method for non-metallic and noncementitious site-applied
materials
Influence des matériaux en contact sur l'eau destinée à Einfluss von Materialien auf Trinkwasser - Einfluss
la consommation humaine - Influence due à la infolge der Migration - Teil 2: Prüfverfahren für vor Ort
migration - Partie 2 : Méthode d'essai des matériaux aufgebrachte nicht metallische und nicht
appliqués sur site, excepté les matériaux métalliques et zementgebundene Materialien
ceux à base de ciment
This European Standard was approved by CEN on 15 November 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12873-2:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 7
5 Reagents . 7
6 Apparatus . 8
7 Test pieces . 9
8 Pre-treatment of test pieces . 10
9 Test procedure . 11
10 Calculation of test results . 13
11 Test report . 14
Annex A (normative) Arrangement for flushing pipes with nominal size greater than DN 80 . 18
Annex B (normative) Additional procedure for testing non-homogeneous products and
pipes with nominal size greater than DN 80 . 21
Annex C (informative) Examples of extended collection and analysis of migration waters . 26
Annex D (informative) Procedural tests using standard additions (positive controls) . 28
Annex E (informative) Flow diagrams (Figures E.1 and E.2) for migration test procedure for
cold water temperature and elevated temperature . 29
Bibliography . 31
European foreword
This document (EN 12873-2:2021) has been prepared by Technical Committee CEN/TC 164 “Water
Supply”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2022, and conflicting national standards shall be
withdrawn at the latest by June 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document will supersede EN 12873-2:2005.
Significant technical difference between this edition and EN 12873-2:2005 is as follows:
• the test temperatures, outlined in Clause 4 ‘Principle’, are more specific;
• the use of chromic acid is removed because of safety concerns;
• the use of sulphuric acid has been removed;
• the examples of extended collection and analysis of migration waters (Annex C) are more
systematic.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
In respect of potential adverse effects on the quality of water intended for human consumption caused
by the materials, it is called to mind that, while awaiting the adoption of verifiable European acceptance
criteria, the relevant national regulations remain in force.
This document has been drawn up with the objective to describe a test method to determine the
migration of substances from products made from, or incorporating, organic and glassy
(porcelain/vitreous enamel) material for use in contact with water intended for human consumption.
Annex A, which is normative, describes an alternative arrangement for flushing pipes having a nominal
size greater than DN 80.
Annex B, which is informative, describes additional procedures for testing non-homogeneous products
and pipes having a nominal size greater than DN 80.
Annex C, which is informative, describes a schedule for the preparation of migration waters.
Annex D, which is informative, describes procedural tests using standard additions (positive controls).
Annex E, which is informative, describes the migration test procedure in a schematic manner.
This document will result in one of a series of standards on test methods which support the appropriate
standards.
With regards to potential adverse effect on the quality of water intended for human consumption,
caused by the material testing covered by this document:
1) This document provides no information as to whether the final product tested using this
methodology may be used without restriction in any of the Member States of the EU or EFTA.
2) It should be noted that, whilst awaiting the adoption of verifiable European criteria, existing
national regulations concerning the use of this material test method remain in force.
NOTE Conformity with this document does not confer or imply acceptance or approval of the material in any
of the Member States of the EU or EFTA. The use of the methodology covered by this document is subject to
regulation or control by National Authorities.
This document, Part 2, is the second in a series of standards for dealing with the influence of migration
from materials on water intended for human consumption, including:
— Part 1: Test method for factory-made products made from or incorporating organic and glassy
(porcelain/vitreous enamel) materials;
— Part 2: Test method for non-metallic and non-cementitious site-applied products;
— Part 3: Test method for ion exchange and absorbent resins;
— Part 4: Test method for water treatment membranes.
1 Scope
This document specifies a procedure to determine the migration of substances from non-metallic and
non-cementitious site-applied materials for use in contact with water intended for human consumption.
It is applicable to site-applied materials intended to be used under various conditions for the transport
and storage of water intended for human consumption, including raw water used for the production of
water intended for human consumption. It covers the extraction by water of substances from these
materials after their application on site.
The document is applicable to materials whose physical or chemical properties alter during or after on-
site application, such as coatings, paints, and adhesives. In addition, some site-applied materials that do
not change in such a manner, e.g. greases or lubricants, are also included.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 7393-2, Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric
method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
3.1
test
technical operation that consists of the determination of one or more characteristics of a given product
3.2
test procedure
specified technical method for performing a test
3.3
test report
document that presents test results and other information relevant to a test
3.4
testing laboratory
laboratory that performs tests
3.5
material
manufactured items(s) for application on site and subsequent contact with water intended for human
consumption
3.6
product
applied items, in its finished form after application on site, that comes into contact with water intended
for human consumption
3.7
test piece
product to be tested
3.8
tap water
water intended for human consumption
Note 1 to entry: see 5.2.1.
3.9
test water
water used for migration testing
Note 1 to entry: see 5.2.2 and 5.2.3.
3.10
prewashing water
water used for prewashing
Note 1 to entry: see 5.2.4.
3.11
blank water
test water which has been kept at the same specified conditions as migration water but without contact
with test pieces
Note 1 to entry: for test water, see 5.2.2 and 5.2.3; for migration water, see 3.15.
3.12
migration
movement of a substance or substances from test pieces into test water
3.13
migration period
period of time in which the migration is carried out under specified conditions
Note 1 to entry: the period of time can be 24 h or 72 h, see Clause 4.
3.14
migration water
test water after exposure to a test piece under specified conditions
3.15
migration rate
mass of a measured substance or substances (in mg) migrating from one square decimetre of a test
piece into the test water in one day at a specified temperature (°C)
3.16
lining
layer(s) of material(s) applied on
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.