EN ISO 10218-1:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)

ISO 10218-1:2011 specifies requirements and guidelines for the inherent safe design, protective measures and information for use of industrial robots. It describes basic hazards associated with robots and provides requirements to eliminate, or adequately reduce, the risks associated with these hazards.
ISO 10218-1:2011 does not address the robot as a complete machine. Noise emission is generally not considered a significant hazard of the robot alone, and consequently noise is excluded from the scope of ISO 10218-1:2011.
ISO 10218-1:2011 does not apply to non‑industrial robots, although the safety principles established in ISO 10218 can be utilized for these other robots.

Industrieroboter - Sicherheitsanforderungen - Teil 1: Roboter (ISO 10218-1:2011)

Teil 1 dieser Internationalen Norm legt Anforderungen und Anleitungen für die inhärent sichere Konstruktion, für Schutzmaßnahmen und die Benutzerinformation für Industrieroboter nach den Begriffen im Abschnitt 3 fest. Sie beschreibt grundlegende Gefährdungen in Verbindung mit Robotern und legt Anforderungen fest, um die mit diesen Gefährdungen verbundenen Risiken zu beseitigen oder hinreichend zu verringern.
Diese Norm betrachtet den Roboter nicht als vollständige Maschine. Lärmemission wird im Allgemeinen nicht als signifikante Gefährdung, die vom Roboter allein ausgeht, betrachtet; dies wird in Teil 2 für das Robotersystem oder die vollständige Maschine vollständig behandelt.
Diese Norm gilt nicht für Roboter außerhalb des industriellen Bereichs, obwohl die in dieser Internationalen Norm festgelegten Sicherheitsgrundsätze auch auf diese anderen Roboter angewandt werden können. Beispiele für nicht-industrielle Anwendungen von Robotern, die jedoch keinen Anspruch auf Vollständigkeit erheben, sind: Unterwasser-, Militär- und Raumfahrtroboter, fernbediente Manipulatoren, Prothesen und andere Hilfen für Körperbehinderte, Mikroroboter (Reichweite weniger als 1 mm), Chirurgie und Gesund-heitsvorsorge und Dienstleistungs- oder Konsumprodukte.
ANMERKUNG 1   Anforderungen an Robotersysteme, die Integration und den Einbau werden in Teil 2 behandelt.
ANMERKUNG 2   Durch spezielle Anwendungen können zusätzliche Gefährdungen verursacht werden (z. B. Schwei¬ßen, Laserstrahlschneiden, Bearbeitung). Diese Gefährdungen sind bei der Roboterkonstruktion zu beachten.

Robots et dispositifs robotiques - Exigences de sécurité pour les robots industriels - Partie 1: Robots (ISO 10218-1:2011)

L'ISO 10218-1:2011 spécifie les exigences et les recommandations pour la prévention intrinsèque, les mesures de protection et les informations pour l'utilisation des robots industriels. Elle décrit les phénomènes dangereux de base associés aux robots et fournit des exigences pour éliminer ou réduire de manière appropriée les risques associés à ces phénomènes dangereux.
L'ISO 10218-1:2011 ne traite pas le robot comme une machine complète. L'émission sonore n'est généralement pas considérée comme un phénomène dangereux significatif du robot lui-même et par conséquent, le bruit est exclu du domaine d'application de l'ISO 10218-1:2011.
L'ISO 10218-1:2011 ne s'applique pas aux robots non industriels, bien que les principes de sécurité établis dans l'ISO 10218 puissent être utilisés pour ces autres robots.

Roboti in robotske naprave - Varnostne zahteve za industrijske robote - 1. del: Roboti (ISO 10218-1:2011)

Ta del ISO 10218 določa zahteve in smernice za varno zasnovo, zaščitne ukrepe in navodila za uporabo industrijskih robotov. Opisuje osnovne nevarnosti, povezane z roboti, in podaja zahteve za preprečevanje ali ustrezno zmanjševanje tveganj, povezanih s temi nevarnostmi. Ta del ISO 10218 ne obravnava robota kot celotnega stroja. Emisije hrupa v splošnem ne veljajo za pomembno nevarnost samega robota, zato je hrup izključen iz obsega uporabe tega dela ISO 10218. Ta del ISO 10218 ne velja za neindustrijske robote, čeprav se varnostna načela, vzpostavljena v ISO 10218, lahko uporabijo za te druge robote.

General Information

• Status: Published
• Publication Date: 30-Jun-2011
• Withdrawal Date: 31-Dec-2012
• ICS: 25.040.30 - Industrial robots. Manipulators
• Technical Committee: CEN/TC 310 - Advanced Manufacturing Technologies
• Drafting Committee: CEN/TC 310 - Advanced Manufacturing Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jul-2011
• Due Date: 24-Jul-2011
• Completion Date: 01-Jul-2011
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 10218-1:2011 - Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)

Relations

• Replaces: EN ISO 10218-1:2008 - Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007)
• Effective Date: 11-Jul-2011
• Revised: FprEN ISO 10218-1 - Robotics - Safety requirements - Part 1: Industrial robots (ISO/FDIS 10218-1:2024)
• Effective Date: 14-Jun-2017
• Revised: EN ISO 10218-1:2006 - Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10218-1:2011
01-september-2011
1DGRPHãþD
SIST EN ISO 10218-1:2009
Roboti in robotske naprave - Varnostne zahteve za industrijske robote - 1. del:
Roboti (ISO 10218-1:2011)
Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots
(ISO 10218-1:2011)
Industrieroboter - Sicherheitsanforderungen - Teil 1:Roboter (ISO 10218-1:2011)
Robots et dispositifs robotiques - Exigences de sécurité pour les robots industriels -
Partie 1: Robots (ISO 10218-1:2011)
Ta slovenski standard je istoveten z: EN ISO 10218-1:2011
ICS:
25.040.30 Industrijski roboti. Industrial robots.
Manipulatorji Manipulators
SIST EN ISO 10218-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10218-1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 10218-1:2011


EUROPEAN STANDARD
EN ISO 10218-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2011
ICS 25.040.30 Supersedes EN ISO 10218-1:2008
English Version
Robots and robotic devices - Safety requirements for industrial
robots - Part 1: Robots (ISO 10218-1:2011)
Robots et dispositifs robotiques - Exigences de sécurité Industrieroboter - Sicherheitsanforderungen - Teil 1:
pour les robots industriels - Partie 1: Robots (ISO 10218- Roboter (ISO 10218-1:2011)
1:2011)
This European Standard was approved by CEN on 21 April 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10218-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10218-1:2011
EN ISO 10218-1:2011 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10218-1:2011
EN ISO 10218-1:2011 (E)
Foreword
This document (EN ISO 10218-1:2011) has been prepared by Technical Committee ISO/TC 184 "Automation
systems and integration" in collaboration with Technical Committee CEN/TC 310 “Advanced automation
technologies and their applications” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at
the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10218-1:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni
...