Metallic industrial piping - Part 3: Design and calculation

1.1 The purpose of EN 13480 is to define the requirements for design, manufacture, installation, testing and inspection of industrial piping systems and supports, including safety systems, made of metallic materials (but initially restricted to steel) with a view to ensure safe operation. 1.2 EN 13480 is applicable to metallic piping above ground, ducted or buried, independent of pressure.

Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung

1.1 Zweck dieser EN 13480 ist die Festlegung von Anforderungen an Konstruktion, Herstellung, Verlegung und Prüfung industrieller Rohrleitungen einschließlich Sicherheitseinrichtungen, aus metallenen Werkstoffen (aber zunächst auf Stähle beschränkt), für sichere Betriebsbedingungen. 1.2 Die vorliegende Norm gilt für oberirdische oder in Kanäle verlegte oder erdgedeckte Rohrleitungen aus metallenen Werkstoffen unabhängig vom Druck.

Tuyauteries industrielles métalliques - Partie 3: Conception et calcul

1.1 L'objectif de EN 13480 est de définir les exigences relatives à la conception, la fabrication, l'installation, le contrôle et l'inspection des réseaux de tuyauteries industrielles, y compris des systèmes de sécurité, réalisés à partir de matériaux métalliques (mais pour l'instant limité aux aciers), dans le but de garantir la sécurité lors de leur utilisation. 1.2 EN 13480 est applicable aux tuyauteries métalliques aériennes, en caniveau ou enterrées, indépendamment de la pression.

Kovinski industrijski cevovodi - 3. del: Konstruiranje in izračun

Ta del tega evropskega standarda določa zahteve za konstruiranje in izračun industrijskih kovinskih cevnih sistemov, vključno z nosilci, iz standarda EN 13480.

General Information

Status
Withdrawn
Publication Date
26-Jun-2012
Withdrawal Date
27-Jun-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
28-Jun-2017

Relations

Buy Standard

Standard
EN 13480-3:2012
English language
409 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und BerechnungTuyauteries industrielles métalliques - Partie 3: Conception et calculMetallic industrial piping - Part 3: Design and calculation77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-3:2012SIST EN 13480-3:2012en,fr,de01-oktober-2012SIST EN 13480-3:2012SLOVENSKI
STANDARDSIST EN 13480-3:2002/A3:2009SIST EN 13480-3:2002/A4:2010SIST EN 13480-3:2002/A5:2012SIST EN 13480-3:2002SIST EN 13480-3:2002/A1:2005SIST EN 13480-3:2002/A2:20071DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13480-3
June 2012 ICS 23.040.01 Supersedes EN 13480-3:2002English Version
Metallic industrial piping - Part 3: Design and calculation
Tuyauteries industrielles métalliques - Partie 3: Conception et calcul
Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung This European Standard was approved by CEN on 8 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13480-3:2012: ESIST EN 13480-3:2012

Issue 1 (2012-06) 2 Contents Page Foreword .9 1 Scope .11 2 Normative references .11 3 Terms, definitions, symbols and units .12 3.1 Terms and definitions .12 3.2 Symbols and units .12 4 Basic design criteria .14 4.1 General .14 4.2 Loadings .14 4.2.1 General .14 4.2.2 Combination of loads .15 4.2.3 Loads for dimensioning .15 4.2.4 Other loads to be taken into account .16 4.2.5 Design conditions .18 4.3 Thickness .20 4.4 Tolerances .22 4.5 Joint coefficient .22 4.6 Dimensioning of piping components subject to pressure .22 5 Design stresses .23 5.1 General .23 5.2 Time-independent nominal design stress .23 5.2.1 Steels other than austenitic steels .23 5.2.2 Austenitic steels .23 5.2.3 Nickel and / or chromium alloy steels .24 5.2.4 Steels castings .24 5.2.5 Additional requirements for steels with no specific control .24 5.3 Time-dependent nominal design stress .25 5.3.1 General .25 5.3.2 Steels .25 5.3.3 Nickel and/or chromium alloy steels .26 6 Design of piping components under internal pressure .26 6.1 Straight pipes .26 6.2 Pipe bends and elbows .27 6.2.1 General .27 6.2.2 Symbols .27 6.2.3 Required wall thicknesses .27 6.3 Mitre bends .29 6.3.1 General .29 6.3.2 Symbols .29 6.3.3 Effective radius of mitre bend .30 6.3.4 Multiple mitre bends .31 6.3.5 Single mitre bends .31 6.3.6 Adjacent straight pipe sections of mitre bends .31 6.4 Reducers .31 6.4.1 Conditions of applicability .31 6.4.2 Specific definitions .32 6.4.3 Specific symbols and abbreviations.32 6.4.4 Conical shells .33 SIST EN 13480-3:2012

Issue 1 (2012-06) 3 6.4.5 Junctions - general . 34 6.4.6 Junction between the large end of a cone and a cylinder without a knuckle . 34 6.4.7 Junction between the large end of a cone and a cylinder with a knuckle . 37 6.4.8 Junction between the small end of a cone and a cylinder . 38 6.4.9 Offset reducers . 40 6.4.10 Special forged reducers. 40 6.5 Flexible piping components . 41 6.5.1 General . 41 6.5.2 Expansion joints . 41 6.5.3 Corrugated metal hose assemblies . 42 6.6 Bolted flange connections. 44 6.6.1 General . 44 6.6.2 Symbols . 44 6.6.3 Standard flange . 44 6.6.4 Non-standard flange . 45 7 Design of ends under internal pressure . 45 7.1 Dished ends . 45 7.1.1 Symbols . 45 7.1.2 Hemispherical ends . 46 7.1.3 Torispherical ends . 46 7.1.4 Ellipsoidal ends . 48 7.1.5 Calculation of  . 49 7.2 Circular flat ends . 52 7.2.1 General . 52 7.2.2 Symbols . 52 7.2.3 Unstayed flat circular ends welded to cylindrical shells/pipes . 54 7.2.4 Unstayed flat circular bolted ends . 61 7.2.5 Reinforcements of openings in unstayed flat ends . 67 8 Openings and branch connections . 69 8.1 General . 69 8.2 Symbols . 70 8.3 Limitations . 71 8.3.1 Thickness ratio . 71 8.3.2 Openings in the vicinity of discontinuities . 72 8.3.3 Types of reinforcement .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.