EN ISO 3037:2022

Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)

This document specifies a non-waxed edge method for the determination of the edgewise crush resistance of corrugated fibreboard. The force is applied in the direction of the flute axis.
This method is applicable to single-wall (double-faced), double-wall, and triple-wall corrugated fibreboard.
It is applicable to all corrugated fibreboard flute types if no buckling and/or tipping occurs during measurement. This method is also applicable to test samples taken from corrugated cases and other converted products.

Wellpappe - Bestimmung des Kantenstauchwiderstandes (Verfahren für ungewachste Kanten) (ISO 3037:2022)

Dieses Dokument legt ein Verfahren für ungewachste Kanten für die Bestimmung des Kantenstauch-widerstandes von Wellpappe fest. Die Kraft wird in der Richtung der Wellenachse aufgebracht.
Dieses Verfahren ist für einwellige (doppelseitige), zwei- und dreiwellige Wellpappe anwendbar.
Es ist für alle Wellenarten anwendbar, wenn während der Messung kein Beulen und/oder Kippen auftritt. Dieses Verfahren ist auch für Durchschnittsproben anwendbar, die von Wellkisten und anderen verarbeiteten Produkten entnommen wurden.

Carton ondulé - Détermination de la résistance à la compression sur chant (méthode sans enduction de cire) (ISO 3037:2022)

Le présent document spécifie une méthode sans enduction de cire permettant de déterminer la résistance à la compression sur chant du carton ondulé. La force est appliquée dans le sens de l’axe des cannelures.
Cette méthode est applicable au carton ondulé simple cannelure (double face), double cannelure et triple cannelure.
Elle concerne toutes les sortes de cannelures de cartons ondulés lorsque aucun flambage ni aucun basculement ne se produit au cours du mesurage, ainsi aux échantillons pour essai prélevés sur les caisses de carton ondulé et d’autres produits transformés.

Valoviti karton - Določanje robne odpornosti (metoda ECT) (ISO 3037:2022)

Ta dokument določa metodo nevoskanega roba za določanje robne odpornosti valovitega kartona. Sila deluje v smeri osi žlebiča.
Ta metoda se uporablja za enoplasten (dvoslojni), dvoplasten in triplasten valoviti karton.
Uporablja se za vse vrste žlebičev valovitega kartona, če pri merjenju ne pride do uklona in/ali nagiba. Ta metoda se uporablja tudi za preskusne vzorce valovite embalaže in drugih predelanih proizvodov.

General Information

• Status: Published
• Publication Date: 06-Dec-2022
• ICS: 85.080.30 - Cardboard
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172 - Pulp, paper and board
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-Dec-2022
• Completion Date: 07-Dec-2022
• Ref Project: SIST EN ISO 3037:2023 - Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)

Relations

• Replaces: EN ISO 3037:2013 - Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
• Effective Date: 15-Jan-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3037:2023
01-maj-2023
Nadomešča:
SIST EN ISO 3037:2013
Valoviti karton - Določanje robne odpornosti (metoda ECT) (ISO 3037:2022)
Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge
method) (ISO 3037:2022)
Wellpappe - Bestimmung des Kantenstauchwiderstandes (Verfahren für ungewachste
Kanten) (ISO 3037:2022)
Carton ondulé - Détermination de la résistance à la compression sur chant (méthode
sans enduction de cire) (ISO 3037:2022)
Ta slovenski standard je istoveten z: EN ISO 3037:2022
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 3037:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3037:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 3037:2023


EN ISO 3037
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2022
EUROPÄISCHE NORM
ICS 85.080.30 Supersedes EN ISO 3037:2013
English Version

Corrugated fibreboard - Determination of edgewise crush
resistance (non-waxed edge method) (ISO 3037:2022)
Carton ondulé - Détermination de la résistance à la Wellpappe - Bestimmung des
compression sur chant (méthode sans enduction de Kantenstauchwiderstandes (Verfahren für
cire) (ISO 3037:2022) ungewachste Kanten) (ISO 3037:2022)
This European Standard was approved by CEN on 25 November 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3037:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 3037:2023
EN ISO 3037:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 3037:2023
EN ISO 3037:2022 (E)
European foreword
This document (EN ISO 3037:2022) has been prepared by Technical Committee ISO/TC 6 "Paper, board
and pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3037:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3037:2022 has been approved by CEN as EN ISO 3037:2022 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 3037:2023

---------------------- Page: 6 ----------------------
SIST EN ISO
...