EN ISO 9539:2010
(Main)Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010)
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010)
ISO 9539:2010 specifies the general, and some of the special, requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes.
Gasschweißgeräte - Werkstoffe für Geräte für Einrichtungen zum Gasschweißen, Schneiden und verwandte Prozesse (ISO 9539:2010)
Diese Internationale Norm legt die allgemeinen und besonderen Anforderungen an die Werkstoffe fest, die für die Herstellung von Geräten für Gasschweißen, Schneiden und verwandte Prozesse notwendig sind.
Zusätzliche Anforderungen an Werkstoffe für Geräte können in anderen Normen festgelegt sein. Diese Internationale Norm gilt nicht für Werkstoffe für Schläuche zum Schweißen nach ISO 3821.
Matériel de soudage aux gaz - Matériaux utilisés pour le matériel de soudage aux gaz, coupage et techniques connexes (ISO 9539:2010)
L'ISO 9539:2010 fixe les exigences générales et certaines exigences particulières relatives aux matériaux utilisés dans la construction des matériels de soudage aux gaz, coupage et techniques connexes.
Oprema za plamensko varjenje - Materiali za naprave za plamensko varjenje, rezanje in sorodne postopke (ISO 9539:2010)
Ta mednarodni standard določa splošne in nekatere posebne zahteve za materiale, ki se uporabljajo za izdelavo naprav za plamensko varjenje, rezanje in sorodne postopke. Dodatne zahteve za materiale za nekatero opremo so podane v drugih standardih. Ta mednarodni standard ne velja za materiale, ki se uporabljajo za izdelavo varilnih cevk in jih določa ISO 3821.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2010
1DGRPHãþD
SIST EN 29539:1998
Oprema za plamensko varjenje - Materiali za naprave za plamensko varjenje,
rezanje in sorodne postopke (ISO 9539:2010)
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied
processes (ISO 9539:2010)
Gasschweißgeräte - Werkstoffe für Geräte für Einrichtungen zum Gasschweißen,
Schneiden und verwandte Prozesse (ISO 9539:2010)
Matériel de soudage aux gaz - Matériaux utilisés pour le matériel de soudage aux gaz,
coupage et techniques connexes (ISO 9539:2010)
Ta slovenski standard je istoveten z: EN ISO 9539:2010
ICS:
25.160.30 Varilna oprema Welding equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9539
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2010
ICS 25.160.20 Supersedes EN 29539:1992
English Version
Gas welding equipment - Materials for equipment used in gas
welding, cutting and allied processes (ISO 9539:2010)
Matériel de soudage aux gaz - Matériaux utilisés pour le Gasschweißgeräte - Werkstoffe für Geräte für
matériel de soudage aux gaz, coupage et techniques Einrichtungen zum Gasschweißen, Schneiden und
connexes (ISO 9539:2010) verwandte Prozesse (ISO 9539:2010)
This European Standard was approved by CEN on 9 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9539:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 9539:2010) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding”, the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the
latest by July 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 29539:1992.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9539:2010 has been approved by CEN as a EN ISO 9539:2010 without any modification.
INTERNATIONAL ISO
STANDARD 9539
Second edition
2010-01-15
Gas welding equipment — Materials for
equipment used in gas welding, cutting
and allied processes
Matériel de soudage aux gaz — Matériaux utilisés pour le matériel de
soudage aux gaz, coupage et techniques connexes
Reference number
ISO 9539:2010(E)
©
ISO 2010
ISO 9539:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 9539:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9539 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 8, Equipment for gas welding, cutting and allied processes.
This second edition cancels and replaces the first edition (ISO 9539:1988) which has been technically revised.
Requests for official interpretations of any aspect of this International S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.