EN 17009:2019

Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking

This European Standard defines and specifies the relevant characteristics, requirements and appropriate test methods for determination of the suitability of floorings made with at least a top layer of lignified material other than wood for use as internal flooring including in fully enclosed public transport premises.
The European Standards for specific flooring products made of lignified material other than wood to which this European Standard applies, and which provide product definitions, requirements for dimensional tolerances and other technical specifications, are the following:
- Bamboo flooring products (EN YYYYY),
- Palm flooring products (EN ZZZZZ).
This European Standard provides also for the assessment and verification of constancy of performance and the requirements for marking these products.
This European Standard covers flooring products made of lignified material other than wood which may or may not be treated to improve their reaction to fire performance or their durability against biological agents.
This European Standard does not apply to:
- flooring products specifically manufactured for enhanced tactile and recognition,
- wood flooring products covered by EN 14342,
- laminate flooring products covered by EN 14041.

Bodenbelag aus lignifizierten Materialien, die kein Holz sind - Eigenschaften, Bewertung und Überprüfung der Leistungsbeständigkeit und Kennzeichnung

Revêtement de sol en matériaux ligneux autres que le bois - Caractéristiques, évaluation et vérification de la constance des performances et marquage

Talne obloge iz nelesnih lignificiranih materialov - Lastnosti, ocenjevanje in preverjanje nespremenljivosti lastnosti ter označevanje

Ta evropski standard opredeljuje in določa ustrezne lastnosti, zahteve in preskusne metode za določanje primernosti talnih oblog, ki so izdelane z vsaj zgornjo plastjo iz lignificiranih materialov, razen lesa, za uporabo kot notranje talne obloge, vključno s popolnoma zaprtimi javnimi prevoznimi sredstvi. Evropski standardi za določene talne obloge, izdelane iz lignificiranih materialov, razen lesa, na katere se ta standard nanaša in ki navajajo definicije izdelkov, zahteve dimenzijskih toleranc in druge tehnične specifikacije, vključujejo naslednje: – izdelke talnih oblog iz bambusa (EN YYYYY), – izdelke talnih oblog iz kokosovega lesa (EN ZZZZZ). Ta evropski standard omogoča ocenjevanje in preverjanje nespremenljivosti lastnosti teh izdelkov in podaja zahteve za njihovo označevanje. Ta evropski standard zajema talne obloge, izdelane iz lignificiranih materialov, razen lesa, ki so lahko obdelani ali neobdelani za izboljšanje njihove odpornosti na ogenj ali vzdržljivosti proti biološkim dejavnikom. Ta evropski standard se ne uporablja za: – talne obloge, izdelane posebej za taktilne oznake in prepoznavanje, – lesene talne obloge, ki jih zajema standard EN 14342, – izdelke iz laminata, ki jih zajema standard EN 14041.

General Information

• Status: Published
• Publication Date: 12-Mar-2019
• Withdrawal Date: 29-Sep-2019
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 33 - Specific user requirements - Timber in flooring
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Sep-2024
• Completion Date: 02-Sep-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/119 REV1 - Amendment to mandate to CEN and CENELEC concerning the execution of standardisation work for harmonised standards on floor coverings
• Ref Project: SIST EN 17009:2019 - Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2019
Talne obloge iz nelesnih lignificiranih materialov - Lastnosti, ocenjevanje in
preverjanje nespremenljivosti lastnosti ter označevanje
Flooring of lignified materials other than wood - Characteristics, assessment and
verification of constancy of performance and marking
Bodenbelag aus lignifiziertem Material, das kein Holz ist - Eigenschaften, Bewertung und
Überprüfung der Leistungsbeständigkeit und Kennzeichnung
Revêtement de sol en matériaux ligneux autre que le bois - Caractéristiques, évaluation
de conformité et marquage
Ta slovenski standard je istoveten z: EN 17009:2019
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17009
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2019
EUROPÄISCHE NORM
ICS 97.150
English Version
Flooring of lignified materials other than wood -
Characteristics, assessment and verification of constancy
of performance and marking
Revêtement de sol en matériaux ligneux autres que le Bodenbelag aus lignifizierten Materialien, die kein Holz
bois - Caractéristiques, évaluation et vérification de la sind - Eigenschaften, Bewertung und Überprüfung der
constance des performances et marquage Leistungsbeständigkeit und Kennzeichnung
This European Standard was approved by CEN on 17 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17009:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviations . 14
4.1 Symbols . 14
4.2 Abbreviations . 14
5 Flooring products characteristics . 15
5.1 Reaction to fire . 15
5.2 Dangerous substances . 15
5.2.1 Content of dangerous substances . 15
5.2.2 Emission of dangerous substances into indoor air . 15
5.3 Bending and breaking strength . 16
5.3.1 General . 16
5.3.2 Test methods and results . 16
5.4 Slip resistance . 16
5.5 Thermal properties (resistance) . 16
5.5.1 General . 16
5.5.2 Testing . 16
5.5.3 Calculation . 17
5.6 Biological durability . 18
5.6.1 General . 18
5.6.2 Biological durability testing . 18
5.7 Other characteristics . 18
5.7.1 Raw materials . 18
5.7.2 Moisture content . 18
5.7.3 Hardness . 18
5.7.4 Bonding . 19
5.7.5 Dimensional tolerances . 19
6 Attestation and verification of constancy of performance . 19
6.1 General . 19
6.2 Type Testing . 19
6.2.1 General . 19
6.2.2 Test samples, testing and compliance criteria . 20
6.2.3 Test reports . 20
6.2.4 Shared other party results . 20
6.3 Factory production control (FPC) . 21
6.3.1 General . 21
6.3.2 Requirements . 21
6.3.3 Product specific requirements . 24
6.3.4 Initial inspection of factory and of FPC . 25
6.3.5 Continuing surveillance, assessment and evaluation of FPC . 25
6.3.6 Procedure for modifications . 25
6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced
in very low quantity . 25
7 Marking, labelling and packaging . 26
Annex A (normative) Declaration of formaldehyde emission . 27
A.1 Requirements . 27
A.2 Without testing . 27
A.3 Initial testing . 27
A.4 Factory production control . 28
Annex B (normative) Biological durability testing of products made of lignified material
other than wood . 29
B.1 General . 29
B.2 Sampling of products made of lignified materials other than wood to be tested . 29
B.3 General principles of testing and classification . 29
B.3.1 General principles for testing samples of lignified materials other than wood . 29
B.3.2 General principles for the classification of biological durability . 29
B.3.3 General principles for the classification of performance . 30
B.4 Test methods and classification systems . 30
B.4.1 Biological durability and performance to wood destroying fungi . 30
B.4.1.1 General . 30
B.4.1.2 Testing biological durability against basidiomycetes . 30
B.4.2 Biological durability to larvae of dry wood destroying beetles . 32
B.4.3 Biological durability to termites . 32
B.5 Content of the test report . 33
Annex C (normative) Raw materials . 35
C.1 General . 35
C.2 General requirements for all product types . 35
C.2.1 Finishing . 35
C.2.2 Appearance . 35
C.2.2.1 Face of the element . 35
C.2.2.2 Raw materials . 36
Annex D (normative) Moisture content . 37
Annex E (normative) Dimensional tolerances .
...