prEN ISO 25089
(Main)Leather - Tests for colour fastness - Colour fastness to sea water (ISO/DIS 25089:2024)
Leather - Tests for colour fastness - Colour fastness to sea water (ISO/DIS 25089:2024)
This Standard specifies a method for determining the colour fastness to sea water of leather of all kinds at all stages of processing.
Leder - Farbechtheitsprüfungen - Farbechtheit gegenüber Meerwasser (ISO/DIS 25089:2024)
Cuir - Essais de solidité des coloris - Solidité des coloris à l’eau de mer (ISO/DIS 25089:2024)
Usnje - Preskušanje barvne obstojnost - Barvna obstojnost v morski vodi (ISO/DIS 25089:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Usnje - Preskušanje barvne obstojnost - Barvna obstojnost v morski vodi (ISO/DIS
25089:2024)
Leather - Tests for colour fastness - Colour fastness to sea water (ISO/DIS 25089:2024)
Leder - Farbechtheitsprüfungen - Farbechtheit gegenüber Meerwasser (ISO/DIS
25089:2024)
Cuir - Essais de solidité des coloris - Solidité des coloris à l’eau de mer (ISO/DIS
25089:2024)
Ta slovenski standard je istoveten z: prEN ISO 25089
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 25089
IULTCS
IUF 422
IULTCS
Leather — Tests for colour fastness
Secretariat: ISO
— Colour fastness to sea water
Voting begins on:
ICS: 59.140.30
2024-07-09
Voting terminates on:
2024-10-01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference numbers
ISO/DIS 25089:2024(en)
IULTCS/IUF 422:2024(en)
DRAFT
ISO/DIS 25089:2024(en)
International
Standard
ISO/DIS 25089
IULTCS
IUF 422
IULTCS
Leather — Tests for colour fastness
Secretariat: ISO
— Colour fastness to sea water
Voting begins on:
ICS: 59.140.30
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Reference numbers
Published in Switzerland ISO/DIS 25089:2024(en)
IULTCS/IUF 422:2024(en)
ii
ISO/DIS 25089:2024(en)
IULTCS/IUF 422:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials . 2
6 Test specimens . 3
7 Procedure . 3
8 Evaluation . 4
9 Precision . 4
10 Test report . 4
Annex A (informative) Commercial sources for apparatus and materials . 5
iii
ISO/DIS 25089:2024(en)
IULTCS/IUF 422:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further
the advancement of leather science and technology. IULTCS has three Commissions, which are responsible
for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an
international standardizing body for the preparation of test methods for leather.
This document was prepared by the Physical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUF Commission, IULTCS), in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/DIS 25089:2024(en)
DRAFT International Standard
IULTCS/IUF 422:2024(en)
Leather — Tests for colour fastness — Colour fastness to
sea water
1 Scope
This International Standard specifies a method for determining the colour fastness to sea water of leather of
all kinds at all stages of processing.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
I S O 105 -A01: 2010, Textiles — Tests for colour fastness — Part A01: General principles of testing
ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
ISO 105-A03, Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining
ISO 105-A04, Textiles — Tests for colour fastness — Part A04: Method for the instrumental assessment of the
degree of staining of adjacent fabrics
ISO 105-A05, Textiles — Tests for colour fastness — Part
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.