iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 11978:2000

(Main)

Ophtalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000)

Ophtalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Contact Mr Vyze ext 850 when processing this project through each stage

Augenoptik - Kontaktlinsen und Kontaktlinsenpflegemittel - Herstellerinformationen (ISO 11978:2000)

Diese Internationale Norm legt fest, welche Informationen der Hersteller von Kontaktlinsen und Kontaktlinsenpflegemitteln zur Verfügung stellen muß, um den richtigen und sicheren Gebrauch dieser Produkte und ihres Zubehörs durch beide Arten von Anwendern von Kontaktlinsen - den Kontaktlinsenanpasser und den Kontaktlinsenträger - sicherzustellen. Diese Internationale Norm legt nicht fest, in welcher Form diese Informationen zur Verfügung zu stellen sind.

Optique ophtalmique - Lentilles de contact et produits d'entretien des lentilles de contact - Informations à fournir par le fabricant (ISO 11978:2000)

La présente Norme internationale spécifie les informations à fournir par le fabricant de lentilles de contact et de leurs produits d'entretien, afin de garantir une utilisation correcte et sans danger de ces dispositifs et de leurs accessoires par les deux types d'utilisateur des lentilles de contact : l'adaptateur et le porteur de lentilles.La présente Norme internationale ne spécifie pas le support de présentation de ces informations.

Očesna optika - Kontaktne leče in izdelki za vzdrževanje kontaktnih leč - Informacije proizvajalca (ISO 11978:2000)

General Information

Status
Withdrawn
Publication Date
14-Mar-2000
Withdrawal Date
14-Oct-2014
ICS
11.040.70 - Ophthalmic equipment
Technical Committee
CEN/TC 170 - Ophthalmic optics
Drafting Committee
CEN/TC 170 - Ophthalmic optics
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Oct-2014
Ref Project
SIST EN ISO 11978:2000 - Ophtalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000)

Relations

Replaced By
EN ISO 11978:2014 - Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO 11978:2014)
Effective Date
22-Oct-2014

Buy Standard

EN ISO 11978:2000EN ISO 11978:2000
PreviousNext
Standard
EN ISO 11978:2000
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Augenoptik - Kontaktlinsen und Kontaktlinsenpflegemittel - Herstellerinformationen (ISO 11978:2000)Optique ophtalmique - Lentilles de contact et produits d'entretien des lentilles de contact - Informations a fournir par le fabricant (ISO 11978:2000)Ophtalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000)11.040.70Oftalmološka opremaOphthalmic equipmentICS:Ta slovenski standard je istoveten z:EN ISO 11978:2000SIST EN ISO 11978:2000en01-november-2000SIST EN ISO 11978:2000SLOVENSKI
STANDARD



SIST EN ISO 11978:2000



SIST EN ISO 11978:2000



SIST EN ISO 11978:2000



ReferencenumberISO11978:2000(E)©ISO2000INTERNATIONALSTANDARDISO11978Firstedition2000-03-15Ophthalmicoptics—Contactlensesandcontactlenscareproducts—InformationsuppliedbythemanufacturerOptiqueophtalmique—Lentillesdecontactetproduitsd'entretiendeslentillesdecontact—InformationsàfournirparlefabricantSIST EN ISO 11978:2000



ISO11978:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2000Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostale56CH-1211Geneva20Tel.+41227490111Fax+41227341079E-mailcopyright@iso.chWebwww.iso.chPrintedinSwitzerlandii©ISO2000–AllrightsreservedSIST EN ISO 11978:2000



ISO11978:2000(E)©ISO2000–AllrightsreservediiiContentsPageForeword.ivIntroduction.v1Scope.12Normativereferences.13Termsanddefinitions.14Contactlensinformationsuppliedbythemanufacturer.24.1General.24.2Label.24.3Instructionsforuse.35Contactlenscareproductinformationsuppliedbythemanufacturer.45.1General.45.2Label.45.3Instructionsforuse.6Bibliography.7SIST EN ISO 11978:2000



ISO11978:2000(E)iv©ISO2000–AllrightsreservedForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhastherighttoberepresentedonthatcommittee.Internationalorganizati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7921:2024(Main)
Ophthalmic optics and instruments - Near reading charts (ISO 7921:2024)
SIST EN ISO 7921:2024

This document applies to printed, projected, and electronic displays of high-contrast text that are designed for assessment and measurement of near reading acuity under photopic conditions.
The definitions and requirements of this document apply to the Latin alphabet.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11979-7:2024(Main)
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO 11979-7:2024)
SIST EN ISO 11979-7:2024

This document specifies the particular requirements for the clinical investigations of intraocular lenses that are implanted in the eye in order to correct aphakia.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9342-1:2023(Main)
Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023)
SIST EN ISO 9342-1:2023

This document specifies requirements for reference lenses for the calibration and verification of focimeters that are used for the measurement of spectacle form lenses, e.g. those complying with ISO 8598-1. It also gives a method for the determination of the back vertex power of the reference lenses.
NOTE            It is accepted that other reference lenses can also be used with powers within the given range, manufactured to the same standard of accuracy and form, but different back vertex powers. However, only lenses with integer nominal powers, as described in 4.1, can be used for the calibration of digitally-rounding focimeters.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19979:2023(Main)
Ophthalmic optics - Contact lenses - Hygienic management of multipatient use trial contact lenses (ISO 19979:2018)
SIST EN ISO 19979:2023

ISO 19979:2018 provides guidance to manufacturers for the development of information to be provided to eye care practitioners for the hygienic management of trial hydrogel, composite and rigid gas-permeable (RGP) contact lenses intended for multipatient use.
ISO 19979:2018 does not apply to:
-      labelling of contact lenses;
-      the inactivation of prions and viruses since there are no standardised methods available for contact lenses.
ISO 19979:2018 can be used as guidance for the development of a hygienic management procedure for multipatient use.
NOTE       ISO 14729 does not cover multipatient use.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10943:2023(Main)
Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2023)
SIST EN ISO 10943:2023

This document, together with ISO 15004-1 and ISO 15004-2, specifies minimum requirements and test methods for hand-held, spectacle-type, and head-worn indirect ophthalmoscopes for observing indirect images of the eye fundus.
This document takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.
This document is not applicable to condensing lenses used for indirect ophthalmoscopy or to accessories.
This document is not applicable to table-mounted instruments such as Gullstrand ophthalmoscopes and their derivatives, nor to ophthalmoscopes primarily intended for image capture and/or processing such as those based on scanning laser techniques.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8980-3:2022(Main)
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2022)
SIST EN ISO 8980-3:2022

This document specifies requirements for the transmittance properties of uncut and unmounted finished spectacle lenses, including attenuation of solar radiation.
This document is not applicable to
—    spectacle lenses having specific transmittance or absorption characteristics prescribed for medical reasons,
—    products to which specific personal protective equipment transmittance standards apply, and
—    products intended for direct observation of the sun, such as for solar-eclipse viewing.
NOTE 1    By reference to ISO 21987 and ISO 14889, this document also applies to lenses mounted in spectacles.
NOTE 2    Optical and geometric requirements are given for uncut finished spectacle lenses in ISO 8980‑1 and ISO 8980‑2, and for mounted lenses, in ISO 21987.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10942:2022(Main)
Ophthalmic instruments - Direct ophthalmoscopes (ISO 10942:2022)
SIST EN ISO 10942:2022

This document, together with ISO 15004-1 and ISO 15004-2, specifies minimum requirements and test methods for hand-held direct ophthalmoscopes designed for directly observing the eye fundus.
This document takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15798:2022(Main)
Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2022)
SIST EN ISO 15798:2022

This document is applicable to ophthalmic viscosurgical devices (OVDs), a class of surgical invasive medical devices with viscous and/or viscoelastic properties, intended for use during surgery in the anterior segment of the human eye. OVDs are designed to create and maintain space, to protect intraocular tissues and to manipulate tissues during surgery.
This document specifies requirements with regard to safety for the intended performance, design attributes, preclinical and clinical evaluation, sterilization, product packaging, product labelling and information supplied by the manufacturer of these devices.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16672:2021(Main)
Ophthalmic implants - Ocular endotamponades (ISO 16672:2020)
SIST EN ISO 16672:2021

This document applies to ocular endotamponades (OE), a group of non-solid surgically invasive medical devices introduced into the vitreous cavity of the eye to flatten and position a detached retina onto the retinal pigment epithelium (RPE), or to tamponade the retina.
With regard to the safety and efficacy of OE, this document specifies requirements for their intended performance, design attributes, pre-clinical and clinical evaluation, sterilization, product packaging, product labelling and the information supplied by the manufacturer.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15253:2021(Main)
Ophthalmic optics and instruments - Optical and electro-optical devices for enhancing low vision (ISO 15253:2021)
SIST EN ISO 15253:2021

This document is applicable to optical and electro-optical devices specified by the manufacturer for use by visually impaired persons as low vision aids. This document specifies requirements and test methods for optical and electro-optical devices specified by the manufacturer for use by visually impaired persons as low vision devices.
Implantable low vision devices are excluded.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day