iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 16587

(Main)

Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure

Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure

This document describes the specific ‘Design for PRM use’ requirements applying to infrastructure and the assessment of those requirements. The following applies to this document:
—   The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.
—   This document defines elements which are universally valid for obstacle-free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this document are to be used for infrastructure applications.
—   This document only refers to aspects of accessibility for PRM passengers; it does not define non-PRM related requirements and definitions.
—   This document assumes that the infrastructure is in its defined operating condition.
—   Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
This document contains requirements relating to 'Obstacle-free routes'.

Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Anforderungen an die Infrastruktur für hindernisfreie Wege

Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences relatives aux cheminements libres d'obstacles pour l'infrastructure

Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi - Zahteve za infrastrukturo brez ovir na poti

General Information

Status
Not Published
Publication Date
27-Nov-2024
ICS
11.180.01 - Aids for disabled and handicapped persons in general
45.020 - Railway engineering in general
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 44 - People with Reduced Mobility (PRM)
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
30-May-2024
Due Date
22-Feb-2023
Completion Date
30-May-2024
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
Ref Project
oSIST prEN 16587:2022 - Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure

Relations

Revises
EN 16587:2017 - Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure
Effective Date
16-Oct-2019

Buy Standard

prEN 16587:2022prEN 16587:2022
PreviousNext
Draft
prEN 16587:2022
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16587:2022
01-julij-2022
Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi -
Zahteve za infrastrukturo brez ovir na poti
Railway applications - Design for PRM Use - Requirements on obstacle free routes for
infrastructure
Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Anforderungen an die
Infrastruktur für hindernisfreie Wege
Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences
relatives aux cheminements libres d'obstacles pour l'infrastructure
Ta slovenski standard je istoveten z: prEN 16587
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
45.020 Železniška tehnika na Railway engineering in
splošno general
oSIST prEN 16587:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16587:2022

---------------------- Page: 2 ----------------------
oSIST prEN 16587:2022


DRAFT
EUROPEAN STANDARD
prEN 16587
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2022
ICS 11.180.01; 45.020 Will supersede EN 16587:2017
English Version

Railway applications - Design for PRM Use - Requirements
on obstacle free routes for infrastructure
Applications ferroviaires - Conception destinée à Bahnanwendungen - Gestaltung für die Nutzung durch
l'usage par les PMR - Exigences relatives aux PRM - Anforderungen an die Infrastruktur für
cheminements libres d'obstacles pour l'infrastructure hindernisfreie Wege
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16587:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16587:2022
prEN 16587:2022 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Requirements and assessment . 7
5.1 General. 7
5.2 Obstacle-free routes . 7
5.3 Horizontal circulation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16587:2017(Main)
Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure
SIST EN 16587:2017

This European Standard describes the specific ‘Design for PRM Use’ requirements for obstacle-free routes applying to infrastructure and the assessment of those requirements. The following applies to this European Standard:
-   The definitions and requirements describe specific aspects of ‘Design for PRM Use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   This European Standard defines elements which are universally valid for obstacle-free routes. The definitions and requirements of this European Standard should be used for infrastructure applications;
-   This European Standard only refers to aspects of accessibility for PRM passengers, it does not define general requirements and general definitions;
-   This European Standard assumes that the infrastructure is in the defined operating condition;
-   Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
This European Standard contains requirements relating to 'Obstacle-free routes'.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16586-1:2017(Main)
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress
SIST EN 16586-1:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   This standard defines elements which are universally valid for obstacle free travelling including steps for access and egress and boarding aids. The definitions and requirements of this standard are to be used for rolling stock applications;
-   This standard only refers to aspects of accessibility for PRM passengers it does not define general requirements and general definitions;
-   This standard assumes that the vehicle is in the defined operating condition;
-   Where minimum or maximum dimensions are quoted these are absolute NOT nominal
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
-   This document is Part 1 and contains:
-   Steps for access and egress
-   Part 2 contains
-   Boarding aids.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16586-2:2017(Main)
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 2: Boarding aids
SIST EN 16586-2:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including steps for access and egress and boarding aids. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers it does not define general requirements and general definitions;
-   this standard assumes that the vehicle is in the defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal.
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
-   Part 1 contains:
-   steps for access and egress.
-   this document is Part 2 and contains:
-   boarding aids.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16585-2:2017(Main)
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving
SIST EN 16585-2:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
-   this standard assumes that the rolling stock is in its defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and components' standard is written in three parts:
-   Part 1 contains:
-   toilets;
-   this document is Part 2 and contains:
-   handholds;
-   seats;
-   wheelchair spaces;
-   Part 3 contains:
-   clearways;
-   internal doors.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16585-1:2017(Main)
Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets
SIST EN 16585-1:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
-   this standard assumes that the rolling stock is in its defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and Components' standard is written in three parts:
-   this document is Part 1 and contains:
-   toilets;
-   part 2 contains:
-   handholds;
-   seats;
-   wheelchair spaces;
-   part 3 contains:
-   clearways;
-   internal doors.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16585-3:2017(Main)
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors
SIST EN 16585-3:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
-   this standard assumes that the rolling stock is in its defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and components' standard is written in three parts:
-   Part 1 contains:
-   toilets;
-   Part 2 contains:
-   handholds;
-   seats;
-   wheelchair spaces;
-   this document is Part 3 and contains:
-   clearways;
-   internal doors.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16584-1:2017(Main)
Railway applications - Design for PRM use - General requirements - Part 1: Contrast
SIST EN 16584-1:2017

Introduction
Based on the Directive 2001/16/EC modified by Directive 2004/50/EC of the European Community and additional activities of a number of EC member states concerning "Obstacle-free Travelling" ERA published a Technical Specification Interoperability for "People with Reduced Mobility (PRM)" which was mandated by the EC. The objective of this TSI is to enhance the accessibility of rail transport to these persons.
The definition of People with Reduced Mobility is in accordance with clause 2.2 of the TSI PRM.
General
-   The definitions and requirements shall describe the utilisation of information by people with reduced mobility especially for people with hearing, visual or communication impairments.
-   This standard defines elements which are universally valid for obstacle free travelling such as lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this standard shall be used for infrastructure as well as rolling stock applications.
-   The standard shall define aspects of accessibility (to Infrastructure and Rolling Stock) specifically required by PRM users, it shall not define general requirements and definitions applicable to all users.
-   For preparing the terms and definitions well-defined operating conditions are to be considered. Any damages or operating trouble e.g. failures of parts of the lighting system will not be taken into account.
Definition of systems and components
-   Part 1 Contrast
Terms and definitions for systems and components
The task is to describe clear and consistent terms and definitions. Where measurement methods and/or assessment procedures are needed to allow a clear pass/fail assessment, this task shall be done as well.
Existing European standards shall be taken into account for this work.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16584-3:2017(Main)
Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics
SIST EN 16584-3:2017

This European standard describes the specific ‘Design for PRM Use’ requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this standard:
-   The definitions and requirements describe specific aspects of ‘Design for PRM Use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.
-   This standard defines elements which are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this standard are to be used for infrastructure and rolling stock applications.
-   This standard only refers to aspects of accessibility for PRM passengers it does not define non PRM related requirements and definitions.
-   This standard assumes that the infrastructure or rolling stock is in its defined operating condition.
-   Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The ‘General Requirements’ standard is written in three parts:
-   Part 1 contains:
-   contrast.
-   Part 2 contains:
-   spoken information;
-   written information;
-   tactile information;
-   pictograms.
-   This document is Part 3 and contains:
-   lighting;
-   low reflecting properties;
-   transparent obstacles;
-   slip resistance.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16584-2:2017(Main)
Railway applications - Design for PRM use - General requirements - Part 2: Information
SIST EN 16584-2:2017

Introduction
Based on the Directive 2001/16/EC modified by Directive 2004/50/EC of the European Community and additional activities of a number of EC member states concerning "Obstacle-free Travelling" ERA published a Technical Specification Interoperability for "People with Reduced Mobility (PRM)" which was mandated by the EC. The objective of this TSI is to enhance the accessibility of rail transport to these persons.
The definition of People with Reduced Mobility is in accordance with clause 2.2 of the TSI PRM.
General
-   The definitions and requirements shall describe the utilisation of information by people with reduced mobility especially for people with hearing, visual or communication impairments.
-   This standard defines elements which are universally valid for obstacle free travelling such as lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this standard shall be used for infrastructure as well as rolling stock applications.
-   The standard shall define aspects of accessibility (to Infrastructure and Rolling Stock) specifically required by PRM users, it shall not define general requirements and definitions applicable to all users.
-   For preparing the terms and definitions well-defined operating conditions are to be considered. Any damages or operating trouble e.g. failures of parts of the lighting system will not be taken into account.
Definition of systems and components
-   Part 2 Information
o   Spoken information
o   Written information
o   Tactile feedback
o   Pictograms
Terms and definitions for systems and components
The task is to describe clear and consistent terms and definitions. Where measurement methods and/or assessment procedures are needed to allow a clear pass/fail assessment, this task shall be done as well.
Existing European standards shall be taken into account for this work.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 16584-1(Main)
Railway applications - Design for PRM use - General requirements - Part 1: Contrast
oSIST prEN 16584-1:2022

This European Standard describes the specific ‘Design for PRM use’ requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this standard:
- The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.
- This standard defines elements that are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this standard cover the infrastructure and rolling stock applications.
- This standard only refers to aspects of accessibility for PRM passengers it does not define non PRM related requirements and definitions.
- This standard assumes that the infrastructure or rolling stock is in its defined operating condition.
- Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The ‘General requirements’ standard is written in three parts:
- This document is Part 1 and contains:
- contrast;
- Part 2 contains:
- spoken information;
- written information;
- tactile information;
- pictograms;
- Part 3 contains:
- lighting;
- low reflective properties;
- transparent obstacles;
- slip resistance.

  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day