EN ISO 19085-6:2024
(Main)Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines (toupie) (ISO 19085-6:2024)
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines (toupie) (ISO 19085-6:2024)
This document specifies the safety requirements and measures for single spindle vertical moulding machines (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a) device to adjust the arbor vertically;
b) device to tilt the arbor;
c) device to fit a manually operated tenoning sliding table;
d) glass bead saw unit;
e) adjustable table insert;
f) device for changing the direction of rotation of the spindle;
g) device for fixing shank mounted tools on the arbor;
h) interchangeable arbor;
i) quick tool/arbor change system;
j) demountable power feed unit;
k) support for the demountable power feed unit with power-driven adjustments.
This document does not apply to
— machines equipped with outboard bearings,
— machines equipped with powered movements of a front extension table and/or a tenoning sliding table.
This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
Holzbearbeitungsmaschinen - Sicherheit - Teil 6: Einspindelige senkrechte Tischfräsmaschinen (ISO 19085-6:2024)
Dieses Dokument legt die Sicherheitsanforderungen und Maßnahmen für einspindelige senkrechte Tischfräsmaschinen, wie in 3.1 definiert, die für den dauerhaften Einsatz in der Produktion geeignet sind und im Folgenden auch als „Maschinen“ bezeichnet werden, fest.
Die Maschinen sind für das Schneiden von Massivholz und Werkstoffen mit ähnlichen physikalischen Eigenschaften wie Holz konstruiert.
Es behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, wie sie in Anhang A aufgelistet sind, die auf die Maschinen zutreffen, wenn sie bestimmungsgemäß und entsprechend den vom Hersteller vorhergesehenen Bedingungen verwendet, eingestellt und gewartet werden; vernünftigerweise vorhersehbaren Fehlanwendungen wurden ebenso in Betracht gezogen. Die Phasen Transport, Montage, Demontage, Rückbau und Verschrottung wurden ebenfalls berücksichtigt.
Es ist auch für Maschinen anzuwenden, die mit einer oder mehreren der folgenden Einrichtungen/zusätzlichen Arbeitsaggregate ausgerüstet sind, deren Gefährdungen behandelt wurden:
a) Einrichtung zur vertikalen Einstellung des Aufnahmedorns;
b) Einrichtung zum Schrägstellen des Aufnahmedorns;
c) Einrichtung zum Befestigen eines von Hand bewegten Schiebetisches zum Zapfenschneiden/Schlitzen;
d) Glasleisten-Sägeaggregat;
e) einstellbare Tischeinlage;
f) Einrichtung zur Änderung der Spindeldrehrichtung;
g) Einrichtung zur Befestigung von Schaftwerkzeugen am Aufnahmedorn;
h) auswechselbare Aufnahmedorne;
i) Werkzeug-/Aufnahmedorn-Schnellwechselsystem;
j) abnehmbarer Vorschubapparat;
k) Unterstützung für den abnehmbaren Vorschubapparat durch kraftbetätigte Einstellungen.
Dieses Dokument ist nicht anzuwenden:
1) für Maschinen, die mit Oberlager ausgerüstet sind;
2) für Maschinen, die mit kraftbetätigten Bewegungen einer vorderen Tischverlängerung und/oder eines Zapfenschneid-/Schlitztisches ausgerüstet sind.
Dieses Dokument ist nicht für Maschinen anwendbar, die zur bestimmungsgemäßen Verwendung in potentiell explosiven Atmosphären vorgesehen sind oder für Maschinen, die vor dem Datum seiner Veröffentlichung hergestellt wurden.
Machines à bois - Sécurité - Partie 6 : Toupies monobroches à arbre vertical (ISO 19085-6:2024)
Le présent document spécifie les exigences et les mesures de sécurité pour les toupies monobroches à arbre vertical (définies en 3.1), capables d’une utilisation en production continue et ci-après également désignées «machines».
Les machines sont conçues pour la coupe de bois massif et de matériau ayant des caractéristiques physiques similaires à celles du bois.
Le présent document traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu’énumérés à l'Annexe A, applicables aux machines lorsqu'elles sont utilisées, réglées et entretenues comme prévu et dans les conditions prévues par le fabricant y compris une mauvaise utilisation raisonnablement prévisible. Les phases de transport, d'assemblage, de démontage, de mise hors service et de mise au rebut ont également été prises en compte.
Le présent document est également applicable aux machines équipées d'un ou plusieurs des dispositifs/unités de travail supplémentaires suivants, dont les phénomènes dangereux ont été traités:
a) dispositif pour régler le mandrin verticalement;
b) dispositif pour incliner le mandrin;
c) dispositif pour monter une table mobile de tenonnage à commande manuelle;
d) unité de sciage de parclose;
e) insert de table réglable;
f) dispositif pour changer le sens de rotation de l'arbre;
g) dispositif pour fixer des outils à queue sur le mandrin;
h) mandrin interchangeable;
i) système de changement rapide d’outil/de mandrin;
j) unité d'avance mécanisée démontable;
k) support pour l’unité d’avance mécanisée démontable avec réglages mécanisés.
Le présent document ne s’applique pas
— aux machines équipées de paliers extérieurs,
— aux machines avec mouvements mécanisés d’une rallonge de table avant et/ou d’une table mobile de tenonnage.
Le présent document n’est pas applicable aux machines prévues pour une utilisation en atmosphères explosibles, ni aux machines fabriquées avant sa date de publication.
Lesnoobdelovalni stroji - Varnost - 6. del: Enovretenski vertikalni rezkalni stroji (ISO 19085-6:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Lesnoobdelovalni stroji - Varnost - 6. del: Enovretenski vertikalni rezkalni stroji
(ISO 19085-6:2024)
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines
("toupies") (ISO 19085-6:2024)
Holzbearbeitungsmaschinen - Sicherheit - Teil 6: Einspindelige senkrechte
Tischfräsmaschinen (ISO 19085-6:2024)
Machines à bois - Sécurité - Partie 6: Toupies monobroches à arbre vertical (ISO 19085-
6:2024)
Ta slovenski standard je istoveten z: EN ISO 19085-6:2024
ICS:
13.110 Varnost strojev Safety of machinery
25.080.20 Frezalniki Boring and milling machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19085-6
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 13.110; 79.120.10 Supersedes EN ISO 19085-6:2017
English Version
Woodworking machines - Safety - Part 6: Single spindle
vertical moulding machines (toupie) (ISO 19085-6:2024)
Machines à bois - Sécurité - Partie 6: Toupies Holzbearbeitungsmaschinen - Sicherheit - Teil 6:
monobroches à arbre vertical (ISO 19085-6:2024) Einspindelige senkrechte Tischfräsmaschinen (ISO
19085-6:2024)
This European Standard was approved by CEN on 2 March 2024.
This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 03 July 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-6:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 19085-6:2024) has been prepared by Technical Committee ISO/TC 39 "Machine
tools" in collaboration with Technical Committee CEN/TC 142 “Woodworking machines - Safety” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by May 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19085-6:2017.
This document is intended to be used in conjunction with Part 1 of the series.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19085-6:2024 has been approved by CEN as EN ISO 19085-6:2024 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request “M/396
Mandate to CEN and CENELEC for Standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery and amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2006/42/EC
The relevant Essential Requirements of Directive Clauses/sub-clauses of Remarks/Notes
2006/42/EC this EN
1.1.2 Principles of safety integration
a) fitted for its function Clauses 4, 5, 6, 7
c) intended use and reasonably foreseeable misuse Clauses 4, 5, 6, 7
d) constraints in use Clauses 4, 5, 6, 7
e) equipment Clauses 4, 5, 6, 7
1.1.3 Materials and products 5.2, 6.3
1.1.5 Design of machinery to facilitate its handling 6.5
1.1.6 Ergonomics 6.5
1.2.1 Safety and reliability of control systems 4.1, 4.14
1.2.2 Control devices 4.2, 4.4
1.2.3 Starting 4.3
1.2.4.1 Normal stop 4.4.2, 4.5
1.2.4.3 Emergency stop 4.4.4, 4.5
1.2.6 Failure of the power supply 4.8
1.3.1 Risk of loss of stability 5.1, 7.3
1.3.2 Risk of break-up during operation 5.2, 7.3
1.3.3 Risks due to falling or ejected objects 5.2, 5.3, 5.5, 5.8, 5.9, 7.3
1.3.6 Risks relating to variations in the operating 4.7
conditions
1.3.7 Risks related to moving parts 5.6, 5.7, 7.3
1.3.8 Choice of protection against risks related to 5.5, 5.6, 7.3
moving parts
1.3.8.1 Moving transmission parts 5.6, 5.7
1.3.8.2 Moving parts involved in the process 4.14, 5.6
1.3.9 Risk of uncontrolled movements 4.1, 4.5, 5.4
1.4.1 General requirements 5.2, 5.5, 5.6, 5.9, 6.3
1.4.2.1 Fixed guards 5.5.1
1.4.2.2 Interlocking movable guards 5.5.2
1.4.2.3 Adjustable guards restricting access 5.6.2
1.4.3 Special requirements for protective devices 5.5.3
1.5.1 Electricity supply 6.4, 6.13
1.5.2 Static electricity 6.11
1.5.3 Energy supply other than electricity 6.7
1.5.6 Fire 6.1, 6.11
1.5.8 Noise 6.2
1.5.11 External radiation 6.9
1.5.13 Emission of hazardous materials and substances 6.3
1.6.1 Machinery maintenance 6.14, 7.3
1.6.2 Access to operating position and servicing points 4.2, 6.14, 7.3
1.6.3 Isolation of energy sources 6.13, 7.3
1.6.4 Operator intervention 5.5, 5.6, 7.3
1.7.1 Information and warnings on the machinery 7.1, 7.2
1.7.2 Warning devices 7.1
1.7.3 Marking of machinery 7.2
1.7.4 Instructions 6.2, 7.3, Annex F
2.3 Machinery for working wood and analogous
materials
a) guiding 5.10
b) ejection 5.9
c) brake 4.5, 5.4
d) accidental tool contact 5.5, 5.6, 7.3
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
International
Standard
ISO 19085-6
Second edition
Woodworking machines — Safety —
2024-04
Part 6:
Single spindle vertical moulding
machines (toupie)
Machines à bois — Sécurité —
Partie 6: Toupies monobroches à arbre vertical
Reference number
ISO 19085-6:2024(en) © ISO 2024
ISO 19085-6:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 19085-6:2024(en)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Safety requirements and measures for controls . 9
4.1 Safety and reliability of control systems.9
4.2 Control devices .9
4.3 Start .10
4.3.1 Direct start .10
4.3.2 Start via control power-on .10
4.4 Safe stops .11
4.4.1 General .11
4.4.2 Normal stop .11
4.4.3 Operational stop .11
4.4.4 Emergency stop .11
4.5 Braking function of tools .11
4.6 Mode selection .11
4.7 Tool speed changing .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.