EN ISO 17225-7:2014

Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2014)

ISO 17225-7:2014 determines the fuel quality classes and specifications of graded non-woody briquettes.

Biogene Festbrennstoffe - Brennstoffspezifikationen und -klassen - Teil 7: Klassifizierung von nicht-holzartigen Briketts (ISO 17225-7:2014)

Dieser Teil von ISO 17225 legt die qualitätsbezogenen Brennstoffklassen und  spezifikationen für klassifizierte nicht-holzartige Briketts fest. Dieser Teil von ISO 17225 umfasst nur nicht-holzartige Briketts, die aus folgenden Rohmaterialien hergestellt wurden (siehe ISO 17225 1, Tabelle 1):
   2 halmgutartige Biomasse;
ANMERKUNG 1   Halmgutartige Biomasse stammt von Pflanzen mit einem nicht verholztem Stängel, die am Ende der Wachstumssaison absterben. Dazu gehören Getreide  oder Saatgutpflanzen aus der Lebensmittel herstellenden oder verarbeitenden Industrie und deren Nebenprodukte, wie z. B. Getreide.
   3 Biomasse von Früchten;
   4 aquatische Biomasse;
   5 definierte und undefinierte Mischungen von Biomasse.
ANMERKUNG 2   Gruppe 5 Definierte und undefinierte Mischungen umfasst definierte und undefinierte Mischungen aus den auf der Herkunft beruhenden Hauptgruppen fester biogener Brennstoffe holzartige Biomasse, halmgutartige Biomasse, Biomasse von Früchten und aquatische Biomasse.
Definierte Mischungen sind absichtlich gemischte biogene Brennstoffe, während undefinierte Mischungen zufällig gemischte biogene Brennstoffe sind. Die Herkunft der definierten und undefinierten Mischungen ist unter Anwendung von ISO 17225 1, Tabelle 1, zu beschreiben.
Wenn eine definierte oder undefinierte Mischung von festen biogenen Brennstoffen chemisch behandeltes Material enthält, muss dies angegeben werden.
ANMERKUNG 3   Thermisch behandelte Briketts aus Biomasse (z. B. torrefizierte Briketts) fallen nicht in den Anwendungs¬bereich dieses Teils von ISO 17225. Torrefizierung ist eine milde Vorbehandlung von Biomasse bei einer Temperatur zwischen 200 °C und 300 °C.

Biocombustibles solides - Classes et spécifications des combustibles - Partie 7: Classes de briquettes d'origine agricole (ISO 17225-7:2014)

L'ISO 17225-7:2014 détermine les classes et spécifications de qualité du combustible pour des briquettes d'origine agricole.

Trdna biogoriva - Specifikacije goriv in razredi - 7. del: Razvrščeni nelesni briketi (ISO 17225-7:2014)

Standard EN ISO 17225-7 določa kakovostne razrede goriva in specifikacije razvrščenih nelesnih briketov. Ta del standarda ISO 17225 zajema le nelesne brikete, izdelane iz naslednjih surovin (glejte tabelo 1 iz standarda ISO 17225-1): – 2 Zelnata biomasa – 3 Sadna biomasa – 4 Vodna biomasa – 5 Mešanice in zmesi iz biomase. Mešanice so namerno zmešana biogoriva, zmesi pa so nenamerno zmešana biogoriva. Poreklo mešanice in zmesi mora biti opisano na podlagi tabele 1 iz standarda ISO 17225-1. Če mešanica ali zmes iz trdnega biogoriva vsebuje kemično obdelan material, je treba to navesti.

General Information

• Status: Withdrawn
• Publication Date: 06-May-2014
• Withdrawal Date: 20-Jul-2021
• ICS: 27.190 - Biological sources and alternative sources of energy
• ICS: 75.160.10 - Solid fuels
• ICS: 75.160.40 - Biofuels
• Technical Committee: CEN/TC 335 - Solid biofuels
• Drafting Committee: CEN/TC 335/WG 2 - Fuel specifications, classes and quality assurance
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Jul-2021
• Directive: 2000/76/EC - Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of waste
• Mandate: M/298 - Mandate to CEN for standardisation in the field of solid biofuels
• Ref Project: SIST EN ISO 17225-7:2014 - Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2014)

Relations

• Replaced By: EN ISO 17225-7:2021 - Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2021)
• Effective Date: 20-Jun-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2014
7UGQDELRJRULYD6SHFLILNDFLMHJRULYLQUD]UHGLGHO5D]YUãþHQLQHOHVQLEULNHWL
,62
Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes
(ISO 17225-7:2014)
Feste Biobrennstoffe - Brennstoffspezifikationen und - klassen - Teil 7: Einteilung von
nicht-holzartigen Briketts (ISO 17225-7:2014)
Biocombustibles solides - Classes et spécifications des combustibles - Partie 7: Classes
de briquettes d'origine agricole (ISO 17225-7:2014)
Ta slovenski standard je istoveten z: EN ISO 17225-7:2014
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 17225-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 27.190; 75.160.10
English Version
Solid biofuels - Fuel specifications and classes - Part 7: Graded
non-woody briquettes (ISO 17225-7:2014)
Biocombustibles solides - Classes et spécifications des Feste Biobrennstoffe - Brennstoffspezifikationen und -
combustibles - Partie 7: Classes de briquettes d'origine klassen - Teil 7: Einteilung von nicht-holzartigen Briketts
agricole (ISO 17225-7:2014) (ISO 17225-7:2014)
This European Standard was approved by CEN on 29 March 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17225-7:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 17225-7:2014) has been prepared by Technical Committee ISO/TC 238 “Solid
biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17225-7:2014 has been approved by CEN as EN ISO 17225-7:2014 without any modification.
INTERNATIONAL ISO
STANDARD 17225-7
First edition
2014-05-01
Solid biofuels — Fuel specifications
and classes —
Part 7:
Graded non-woody briquettes
Biocombustibles solides — Classes et spécifications des
combustibles —
Partie 7: Classes de briquettes d’origine agricole
Reference number
ISO 17225-7:2014(E)
©
ISO 2014
ISO 17225-7:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 17225-7:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
5 Specification of graded non-woody briquettes . 3
Bibliography . 6
ISO 17225-7:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 238, Solid biofuels.
ISO 17225 consists of the following parts, under the general title Solid biofuels — Fuel specifications and
classes:
— Part 1: General requirements
— Part 2: Graded wood pellets
— Part 3: Graded wood briquettes
— Part 4: Graded wood chips
— Part 5: Graded firewood
— Part 6: Graded non-woody pellets
— Part 7: Graded non-woody briquettes
iv © ISO 2014 – All rights reserved

ISO 17225-7:2014(E)
Introduction
The objective of the ISO 17225 series is to provide unambiguous and clear classification principles for
solid biofuels; to serve as a tool to enable efficient trading of biofuels; to enable good understanding
between seller and buyer as well as a tool for communication with equipment manufacturers. It will also
facilitate authority permission procedures and reporting.
This part of ISO 17225 supports the use of graded non-woody pellets for residential, small commercial
and public building applications.
The residential, small commercial and public building applications require higher quality fuel for the
following reasons:
• Small-scale equipment does not usually have advanced controls and flue gas cleaning
• Appliances is not generally managed by professional heating engineers
• Appliances are often located in residential and populated districts
Non-woody briquettes have high ash, chlorine, nitrogen, sulfur and major element contents, so non-
woody briquettes are recommended to be used in appliances, which are specially designed or adjusted
for this kind of briquettes.
NOTE 1 Briquettes produced according to this part of ISO 17225 may be used in stoves, fireplaces, cookers,
[1]
roomheaters and multifired sauna stoves, which are tested according to European standards EN 13229 ,
[2] [3] [4] [5] [6]
EN 12815 , EN 12809 , EN 13240 , EN 15250 and EN 15821 , and boilers systems tested according to
[7]
EN 303–5 .
NOTE 2 When using non-woody materials for combustion special attention should be paid to the risk of
corrosion in small and medium scale boilers and flue gas systems. Be aware that herbaceous or fruit biomass may
influence the fuel ash composition differently depending on growth and soil conditions. The content of chlorine,
phosphate and potassium in the material may form chlorides and phosphates and other chemical compounds
resulting in high hydrochloric emissions and chemically active ash with low melting temperature causing
corrosion.
NOTE 3 In general non-woody biomass materials have higher content of ash forming elements and produces
ashes with lower melting temperature compared to most woody biomass. This may result in fouling, slagging
and corrosion inside boilers. These problems are especially related to materials that contain high content of
potassium (K) and silicate (Si) and low content of calcium (Ca).
NOTE 4 For individual contracts ISO 17225-1 can be used.
Although these product standards may be obtained separately, they require a general understanding of
the standards based on and supporting ISO 17225-1. It is recommended to obtain and use ISO 17225-1
in conjunction with these standards.
INTERNATIONAL STANDARD ISO 17225-7:2014(E)
Solid biofuels — Fuel specifications and classes —
Part 7:
Graded non-woody briquettes
1 Scope
This part of ISO 17225 determines the fuel quality classes and specifications of graded non-woody
briquettes. This part of ISO 17225 covers only non-woody briquettes produced from the following raw
materials (see ISO 17225-1, Table 1):
– 2 Herbaceous biomass
NOTE 1 Herbaceous biomass is from plants that have a non-woody stem and which die back at the end of the
growing season. It includes grains or seeds crops from food production or processing industry and their by-
products such as cereals.
– 3 Fruit biomass
– 4 Aquatic biomass
– 5 Biomass blends and mixtures
NOTE 2 Group 5 Blends and mixtures include blends and mixtures from the main origin-based solid biofuel
groups woody, herbaceous biomass, fruit biomass and aquatic biomass.
Blends are intentionally mixed biofuels, whereas mixtures are unintentionally mixed biofuels. The
origin of the blend and mixture is to be described using ISO 17225-1, Table 1.
If solid biofuel blend or mixture contains chemically treated material it shall be stated.
NOTE 3 Thermally treated biomass briquettes (e.g. torrefied briquettes) are not included in the scope of this
part of ISO 17225. Torrefaction is a mild pre-treatment of biomass at a temperature between 200 – 300 °C.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
...