prEN ISO 15614-11

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO/DIS 15614-11:2022)

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 11: Elektronen- und Laserstrahlschweißen (ISO/DIS 15614-11:2022)

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire - Partie 11: Soudage par faisceau d'électrons et par faisceau laser (ISO/DIS 15614-11:2022)

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 11. del: Varjenje z elektronskim snopom in z laserskim žarkom (ISO/DIS 15614-11:2022)

General Information

• Status: Not Published
• Publication Date: 04-Apr-2024
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 02-Aug-2023
• Completion Date: 02-Aug-2023
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/601 - COMMISSION IMPLEMENTING DECISION of 1.3.2024 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards pressure equipment and assemblies in support of Directive 2014/68/EU of the European Parliament and of the Council
• Ref Project: oSIST prEN ISO 15614-11:2022 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO/DIS 15614-11:2022)

Relations

• Revises: EN ISO 15614-11:2002 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2022
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskušanje
varilnih postopkov - 11. del: Varjenje z elektronskim snopom in z laserskim
žarkom (ISO/DIS 15614-11:2022)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 11: Electron and laser beam welding (ISO/DIS 15614-11:2022)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 11: Elektronen- und Laserstrahlschweißen (ISO/DIS
15614-11:2022)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire - Partie 11: Soudage par
faisceau d'électrons et par faisceau laser (ISO/DIS 15614-11:2022)
Ta slovenski standard je istoveten z: prEN ISO 15614-11
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-11
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-08-03 2022-10-26
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 11:
Electron and laser beam welding
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire —
Partie 11: Soudage par faisceau d'électrons et par faisceau laser
ICS: 25.160.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15614-11:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

ISO/DIS 15614-11:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-11
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:

Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 11:
Electron and laser beam welding
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire —
Partie 11: Soudage par faisceau d'électrons et par faisceau laser
ICS: 25.160.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 15614-11:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

ISO/DIS 15614-11:2022(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preliminary welding procedure specifications (pWPS) . 2
5 Welding procedure test . 2
6 Test piece . 2
6.1 General . 2
6.2 Shape and dimensions of test pieces . 3
6.2.1 Linear butt weld . 3
6.2.2 Circular butt weld . . 3
6.2.3 Other types . 6
6.3 Welding of test pieces . 7
7 Examination and testing .7
7.1 Extent of examination and testing . 7
7.2 Location and cutting of test specimens . 10
7.3 Non-destructive examination .15
7.3.1 Method . .15
7.3.2 Acceptance level . 15
7.4 Destructive tests . 15
7.4.1 Transverse tensile testing . 15
7.4.2 Bend testing . 15
7.4.3 Toughness testing . 16
7.4.4 Hardness testing. 16
7.4.5 Metallographic examination . 16
7.5 Re-testing . 16
8 Range of qualification .17
8.1 General . 17
8.2 Related to the manufacturer . 17
8.3 Related to the equipment . 17
8.4 Related to the jigs, fixtures and tooling . 17
8.5 Related to the parent material . 17
8.5.1 Grades . 17
8.5.2 Geometry of the assembly . . 17
8.6 Related to the filler materials . 18
8.7 Related to the joint geometry . 18
8.8 Related to the presence of a weld backing . 18
8.9 Related to the weld type . 18
8.10 Related to the welding position . 18
8.11 Related to the welding parameters . 19
8.11.1 Electron beam welding . 19
8.11.2 Laser beam welding . 19
8.12 Related to preheating . 19
8.13 Related to post weld heat treatment . 19
8.14 Related to the number of passes . 19
8.15 Duration of validity . 19
9 Welding Procedure Qualification Record (WPQR) .19
Annex A (informative) Example Welding Procedure Qualification Record form (WPQR) .20
iii
ISO/DIS 15614-11:2022(E)
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED) aimed to be covered .25
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/29/EU (SPVD) aimed to be covered .26
iv
ISO/DIS 15614-11:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
...