iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14402:1999

(Main)

Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999)

Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999)

Wasserbeschaffenheit - Bestimmung des Phenolindex mit der Fließanalytik (FIA und CFA) (ISO 14402:1999)

Diese Norm legt zwei Verfahren zur Bestimmung des Phenolindex in Wasser verschiedener Herkunft (wie Grundwasser, Oberflächenwasser, Sickerwasser und Abwasser) in Massenkonzentrationen zwischen 0;01 mg/l bis 1 mg/l (in der unverdünnten Probe) fest. In bestimmten Fällen darf der Anwendungsbereich verändert werden, indem die Arbeitsbedingungen angepaßt werden. Abschnitt 3 beschreibt die Bestimmung des Phenolindex (ohne Destillation) nach Extraktion, und in Abschnitt 4 wird die Bestimmung des Phenolindex (ohne Extraktion) nach Destillation angegeben.

Qualité de l'eau - Détermination de l'indice phénol par analyse en flux (FIA et CFA) (ISO 14402:1999)

La présente Norme internationale spécifie deux méthodes de détermination de l'indice phénol dans des eaux d'origines différentes (par exemple eaux souterraines, eaux de surface, eaux d'infiltration et eaux résiduaires) en concentrations en masse comprises entre 0,01 mg/l et 1 mg/l (dans l'échantillon non dilué). Dans des cas particuliers, la gamme d'application peut être adaptée en faisant varier les conditions de fonctionnement. L'article 3 décrit la détermination de l'indice phénol (sans distillation) après extraction, et l'article 4 décrit la détermination de l'indice phénol (sans extraction) après distillation.

Kakovost vode - Določevanje fenolnega indeksa s pretočno analizo (FIA in CFA) (ISO 14402:1999)

General Information

Status
Published
Publication Date
31-Aug-1999
ICS
13.060 - Water quality
Technical Committee
CEN/TC 230 - Water analysis
Drafting Committee
CEN/TC 230 - Water analysis
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
21-May-2008
Completion Date
21-May-2008
Ref Project
SIST EN ISO 14402:2000 - Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999)

Buy Standard

EN ISO 14402:2000EN ISO 14402:2000
PreviousNext
Standard
EN ISO 14402:2000
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14402:2000
01-december-2000
.DNRYRVWYRGH'RORþHYDQMHIHQROQHJDLQGHNVDVSUHWRþQRDQDOL]R ),$LQ&)$
,62
Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO
14402:1999)
Wasserbeschaffenheit - Bestimmung des Phenolindex mit der Fließanalytik (FIA und
CFA) (ISO 14402:1999)
Qualité de l'eau - Détermination de l'indice phénol par analyse en flux (FIA et CFA) (ISO
14402:1999)
Ta slovenski standard je istoveten z: EN ISO 14402:1999
ICS:
13.060.70 Preiskava bioloških lastnosti Examination of biological
vode properties of water
SIST EN ISO 14402:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14402:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 14402:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 14402:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 14402:2000
INTERNATIONAL ISO
STANDARD 14402
First edition
1999-09-01
Water quality — Determination of phenol
index by flow analysis (FIA and CFA)
Qualité de l'eau — Détermination de l'indice phénol par analyse en flux (FIA
et CFA)
A
Reference number
ISO 14402:1999(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 14402:2000
ISO 14402:1999(E)
Contents Page
1 Scope .1
2 Normative references .1
3 Determination of phenol index (without distillation) after extraction .1
3.1 Principle.1
3.2 Interferences .1
3.3 Reagents .2
3.4 Apparatus .4
3.5 Sampling.6
3.6 Procedure .7
3.7 Calculation of results .8
4 Determination of phenol index (without extraction) after distillation .9
4.1 Principle.9
4.2 Interferences .9
4.3 Reagents.9
4.4 Apparatus .10
4.5 Sampling.13
4.6 Procedure .13
4.7 Calculation of results .14
5 Expression of results .14
6 Precision and accuracy.14
7 Test report .14
Anne
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7393-2:2018(Main)
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)
SIST EN ISO 7393-2:2018

ISO 7393-2:2017 specifies a method for the determination of free chlorine and total chlorine in water, readily applicable to lab- and field-testing. It is based on measurement of the absorption, the red DPD colour complex in a photometer or the colour intensity by visual comparison of the colour with a scale of standards that is regularly calibrated.
This method is appropriate for drinking water and other waters, where additional halogens like bromine, iodine and other oxidizing agents are present in almost negligible amounts. Seawater and waters containing bromides and iodides comprise a group for which special procedures are to be carried out.
This method is in practice applicable to concentrations, in terms of chlorine (Cl2), from, for example, 0,000 4 mmol/l to 0,07 mmol/l (e.g. 0,03 mg/l to 5 mg/l) total chlorine. For higher concentrations, the test portion is diluted.
Commonly, the method is applied as a field method with mobile photometers and commercially available ready-for-use reagents (liquid reagents, powders and tablets). It is essential that those reagents comply with minimum requirements and contain the essential reagents and a buffer system suitable to adjust the measurement solution to a pH range of typically 6,2 to 6,5. If there is doubt that water samples have uncommon pH values and/or buffer capacities, the user has to check and, if necessary, to adjust the sample pH to the required range. The pH of the sample is within the range of pH 4 and 8. Adjust, if necessary, with sodium hydroxide solution or sulfuric acid before the test.
A procedure for the differentiation of combined chlorine of the monochloramine type, combined chlorine of the dichloramine type and combined chlorine in the form of nitrogen trichloride is presented in Annex A. In Annex C, a procedure is presented for the determination of free and total chlorine in drinking and other low polluted waters, for disposable planar reagent-filled cuvettes using a mesofluidic channel pump/colorimeter.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6341:2012(Main)
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:2012)
SIST EN ISO 6341:2013

ISO 6341.2012 specifies a method for the determination of the acute toxicity to Daphnia magna Straus (Cladocera, Crustacea).
This method is applicable to: chemical substances which are soluble under the conditions of the test, or can be maintained as a stable suspension or dispersion under the conditions of the test; industrial or sewage effluents; treated or untreated waste water; aqueous extracts and leachates; fresh water (surface and ground water); eluates of fresh water sediment; pore water of fresh water sediment.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7393-3:2000(Main)
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990)
SIST EN ISO 7393-3:2000

Specifies a procedure for water. It is applicable for the measurement of concentrations, in terms of chlorine, from 0,01 to 0,21 mmol/l. The interfering substances are given. In annex B a procedure for direct titration is specified. It is usually applied to chlorine concentrations above 7 mol/l in treated drinking water.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7393-1:2000(Main)
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N, N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985)
SIST EN ISO 7393-1:2000

Specifies a procedure for water. Sea water and waters containing bromides and iodides comprise a group for which special procedures are required. The procedure is applicable to concentrations, in terms of chlorine, from 0,000 4 to 0,07 mmol/l total chlorine and at higher concentrations by dilution of samples. Several compounds influencing the procedure are noted.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7980:2000(Main)
Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986)
SIST EN ISO 7980:2000

The procedure is intended for the analysis of raw and drinking waters and can be used for waters having a calcium content of up to 50 mg/l and a magnesium content of up to 5 mg/l. For samples containing higher concentrations of calcium or magnesium a smaller volume of the sample must be taken for the analysis.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11734:1998(Main)
Water quality - Evaluation of the "ultimate" anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995)
SIST EN ISO 11734:1999

Gives a method for the evaluation of the ultimate biodegradability of organic compounds in digested sludge at a given concentration by anaerobic microorganisms.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10712:1995(Main)
Water quality - Pseudomonas putida growth inhibition test (pseudomonas cell multiplication inhibition test)(ISO 10712:1995)
SIST EN ISO 10712:1997

Describes a test method for determining the inhibitory effect of surface, ground and waste water on Pseudomonas putida growth. Not suitable for highly coloured samples or samples containing undissolved or volatile substances which react with the nutrient solution or undergo changes such as biochemical degradation. Also suitable for testing substances soluble in water.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7393-2:2018(Main)
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)
SIST EN ISO 7393-2:2018

ISO 7393-2:2017 specifies a method for the determination of free chlorine and total chlorine in water, readily applicable to lab- and field-testing. It is based on measurement of the absorption, the red DPD colour complex in a photometer or the colour intensity by visual comparison of the colour with a scale of standards that is regularly calibrated.
This method is appropriate for drinking water and other waters, where additional halogens like bromine, iodine and other oxidizing agents are present in almost negligible amounts. Seawater and waters containing bromides and iodides comprise a group for which special procedures are to be carried out.
This method is in practice applicable to concentrations, in terms of chlorine (Cl2), from, for example, 0,000 4 mmol/l to 0,07 mmol/l (e.g. 0,03 mg/l to 5 mg/l) total chlorine. For higher concentrations, the test portion is diluted.
Commonly, the method is applied as a field method with mobile photometers and commercially available ready-for-use reagents (liquid reagents, powders and tablets). It is essential that those reagents comply with minimum requirements and contain the essential reagents and a buffer system suitable to adjust the measurement solution to a pH range of typically 6,2 to 6,5. If there is doubt that water samples have uncommon pH values and/or buffer capacities, the user has to check and, if necessary, to adjust the sample pH to the required range. The pH of the sample is within the range of pH 4 and 8. Adjust, if necessary, with sodium hydroxide solution or sulfuric acid before the test.
A procedure for the differentiation of combined chlorine of the monochloramine type, combined chlorine of the dichloramine type and combined chlorine in the form of nitrogen trichloride is presented in Annex A. In Annex C, a procedure is presented for the determination of free and total chlorine in drinking and other low polluted waters, for disposable planar reagent-filled cuvettes using a mesofluidic channel pump/colorimeter.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6341:2012(Main)
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:2012)
SIST EN ISO 6341:2013

ISO 6341.2012 specifies a method for the determination of the acute toxicity to Daphnia magna Straus (Cladocera, Crustacea).
This method is applicable to: chemical substances which are soluble under the conditions of the test, or can be maintained as a stable suspension or dispersion under the conditions of the test; industrial or sewage effluents; treated or untreated waste water; aqueous extracts and leachates; fresh water (surface and ground water); eluates of fresh water sediment; pore water of fresh water sediment.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7393-3:2000(Main)
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990)
SIST EN ISO 7393-3:2000

Specifies a procedure for water. It is applicable for the measurement of concentrations, in terms of chlorine, from 0,01 to 0,21 mmol/l. The interfering substances are given. In annex B a procedure for direct titration is specified. It is usually applied to chlorine concentrations above 7 mol/l in treated drinking water.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day