Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

This document specifies the diameter, length, wall thickness and shoulder geometry of flexible cylindrical plastic tubes.
It is applicable to tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.

Packmittel - Zylindrische Kunststofftuben - Maße und Grenzabmaße

Dieses Dokument legt die Durchmesser, Längen, Manteldicken und Schultergeometrie zylindrischer Kunststofftuben fest.
Es ist für Tuben zum Verpacken von Produkten der Pharmazie, der Kosmetik, der Hygiene sowie von Lebensmitteln und anderen Haushalts- und Industrieprodukten anzuwenden.

Emballage - Tubes cylindriques souples en matériau plastique - Dimensions et tolérances

Le présent document spécifie le diamètre, la longueur, l’épaisseur de paroi et la géométrie des épaulements des tubes cylindriques souples en matériau plastique.
Il est applicable aux tubes utilisés pour emballer des produits pharmaceutiques, cosmétiques, alimentaires, des produits d’hygiène et autres produits à usage domestique et industriel.

Embalaža - Prožne valjaste plastične tube - Mere in odstopanja

General Information

Status
Published
Publication Date
23-Aug-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Aug-2022
Due Date
08-May-2023
Completion Date
24-Aug-2022

Relations

Buy Standard

Standard
EN 13045:2022
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13045:2021
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13045:2022
01-december-2022
Nadomešča:
SIST EN 13045:2009
Embalaža - Prožne valjaste plastične tube - Mere in odstopanja
Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
Packmittel - Zylindrische Kunststofftuben - Maße und Grenzabmaße
Emballage - Tubes souples cylindriques plastique - Dimensions et tolérances
Ta slovenski standard je istoveten z: EN 13045:2022
ICS:
55.120 Pločevinke. Tube Cans. Tins. Tubes
SIST EN 13045:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13045:2022

---------------------- Page: 2 ----------------------
SIST EN 13045:2022


EN 13045
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2022
EUROPÄISCHE NORM
ICS 55.120 Supersedes EN 13045:2009
English Version

Packaging - Flexible cylindrical plastic tubes - Dimensions
and tolerances
Emballage - Tubes cylindriques souples en matériau Packmittel - Zylindrische Kunststofftuben - Maße und
plastique - Dimensions et tolérances Grenzabmaße
This European Standard was approved by CEN on 3 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13045:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13045:2022
EN 13045:2022 (E)
Contents Page
1 Scope . 4
2 Normative references. 4
3 Terms and definitions . 4
4 Dimensions . 6

2

---------------------- Page: 4 ----------------------
SIST EN 13045:2022
EN 13045:2022 (E)
European foreword
This document (EN 13045:2022) has been prepared by Technical Committee CEN/TC 261 “Packaging”,
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2023, and conflicting national standards shall
be withdrawn at the latest by February 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or a
...

SLOVENSKI STANDARD
oSIST prEN 13045:2021
01-oktober-2021
Embalaža - Prožne valjaste plastične tube - Mere in odstopanja
Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
Packmittel - Zylindrische Kunststofftuben - Maße und Grenzabmaße
Emballage - Tubes souples cylindriques plastique - Dimensions et tolérances
Ta slovenski standard je istoveten z: prEN 13045
ICS:
55.120 Pločevinke. Tube Cans. Tins. Tubes
oSIST prEN 13045:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13045:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13045:2021


DRAFT
EUROPEAN STANDARD
prEN 13045
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2021
ICS 55.120 Will supersede EN 13045:2009
English Version

Packaging - Flexible cylindrical plastic tubes - Dimensions
and tolerances
Emballage - Tubes souples cylindriques plastique - Packmittel - Zylindrische Kunststofftuben - Maße und
Dimensions et tolérances Grenzabmaße
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 261.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13045:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13045:2021
prEN 13045:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.