EN ISO 13140-1:2016
(Main)Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 13141 - Part 1: Test suite structure and test purposes (ISO 13140-1:2016)
Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 13141 - Part 1: Test suite structure and test purposes (ISO 13140-1:2016)
ISO 13140-1:2016 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of on-board units (OBU) and roadside equipment (RSE) to ISO 13141.
It provides a basis for conformance tests for dedicated short-range communication (DSRC) equipment (on-board units and roadside units) to enable interoperability between different equipment supplied by different manufacturers.
Elektronische Gebührenerhebung - Bewertung der Konformität fahrzeuginterner und straßenseitiger Ausrüstung nach ISO 13141 - Teil 1: Struktur und Zweck des Prüfprogrammes (ISO 13140-1:2016)
Perception du télépéage - Évaluation de conformité des équipements embarqués et des équipements d'infrastructures routières à l'ISO 13141 - Partie 1: Structure de la suite d'essais et intentions d'essai (ISO 13140-1:2016)
L'ISO 13140-1:2016 spécifie la structure de la suite d'essais (TSS, Test Suite Structure) et les intentions d'essai (TP, Test Purposes) visant à évaluer la conformité des unités embarquées (OBU) ainsi que des équipements d'infrastructures routières (RSE) par rapport à l'ISO 13141.
Elle constitue une base pour les essais de conformité relatifs aux équipements de communication dédiée à courte portée (DSRC) (les unités embarquées et les unités d'infrastructures routières) afin de permettre l'interopérabilité entre les différents équipements fournis par les différents constructeurs.
Elektronsko pobiranje pristojbin - Vrednotenje skladnosti opreme v vozilu in obcestni napravi s standardom ISO 13141 - 1. del: Zgradba preskuševalnega niza in namen preskušanja (ISO 13140-1:2016)
Ta dokument določa zgradbo preskuševalnega niza (TSS) in namen preskušanja (TP) za vrednotenje skladnosti opreme v vozilu (OBU) in obcestnih napravah (RSE) v skladu s standardom EN 13141.
Zagotavlja podlago za preskuse skladnosti za namensko komunikacijsko opremo kratkega dosega (DSRC) (oprema v vozilu in obcestnih napravah) za zagotavljanje interoperabilnosti različne opreme različnih proizvajalcev.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
1DGRPHãþD
SIST-TS CEN ISO/TS 13140-1:2011
Elektronsko pobiranje pristojbin - Vrednotenje skladnosti opreme v vozilu in
obcestni napravi s standardom ISO 13141 - 1. del: Zgradba preskuševalnega niza
in namen preskušanja (ISO 13140-1:2016)
Electronic fee collection - Evaluation of on-board and roadside equipment for conformity
to ISO 13141 - Part 1: Test suite structure and test purposes (ISO 13140-1:2016)
Elektronische Gebührenerhebung - Konformitätsbeurteilung von bordeigenen und
straßenseitigen Ausrüstungen nach ISO 13141 - Teil 1: Struktur und Zweck des
Prüfprogramms (ISO 13140-1:2016)
Perception du télépéage - Évaluation des équipements embarqués et en bord de route
quant à la conformité avec l'ISO 13141 - Partie 1: Structure de suite d'essai et buts des
essais (ISO 13140-1:2016)
Ta slovenski standard je istoveten z: EN ISO 13140-1:2016
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13140-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2016
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 13140-1:2011
English Version
Electronic fee collection - Evaluation of on-board and
roadside equipment for conformity to ISO 13141 - Part 1:
Test suite structure and test purposes (ISO 13140-1:2016)
Perception du télépéage - Évaluation des équipements Elektronische Gebührenerhebung -
embarqués et en bord de route quant à la conformité Konformitätsbeurteilung von bordeigenen und
avec l'ISO 13141 - Partie 1: Structure de suite d'essai et straßenseitigen Ausrüstungen nach ISO/TS 13141 -
buts des essais (ISO 13140-1:2016) Teil 1: Struktur und Zweck des Prüfprogramms (ISO
13140-1:2016)
This European Standard was approved by CEN on 6 December 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13140-1:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 13140-1:2016) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes CEN ISO/TS 13140-1:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13140-1:2016 has been approved by CEN as EN ISO 13140-1:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 13140-1
First edition
2016-11-15
Electronic fee collection — Evaluation
of on-board and roadside equipment
for conformity to ISO 13141 —
Part 1:
Test suite structure and test purposes
Perception du télépéage — Évaluation des équipments embarqués et
en bord de route quant à la conformité avec ISO 13141 —
Partie 1: Structure de suite d’essai et buts des essais
Reference number
ISO 13140-1:2016(E)
©
ISO 2016
ISO 13140-1:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 13140-1:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 3
5 Test Suite Structure (TSS) . 4
5.1 Structure . 4
5.2 Reference to conformance test specifications . 4
5.3 Test Purposes (TP) . 5
5.3.1 TP Definition conventions . 5
5.3.2 TP naming conventions . 5
5.4 Conformance test report . 6
Annex A (normative) Test purposes for on-board units . 7
Annex B (normative) Test purposes for roadside equipment.22
Annex C (normative) PCTR proforma for on-board units .27
Annex D (normative) PCTR proforma for roadside equipment .33
Bibliography .38
ISO 13140-1:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/TC 204, Intelligent transport systems.
This first edition of ISO 13140-1 cancels and replaces ISO/TS 13140-1:2011, which has been technically
revised. This first edition incorporates the following main modifications compared to the Technical
Specification:
— conversion from a Technical Specification to an International Standard;
— amendment of terms, in order to reflect harmonization of terms across electronic fee collection
(EFC) standards;
— amendments to reflect changes in the underlying base standards, in particular, ISO 13141 and
ISO 14906;
— editorial and formal corrections.
A list of all parts in the ISO 13140 series can be found on the ISO website.
iv © ISO 2016 – All rights reserved
ISO 13140-1:2016(E)
Introduction
ISO 17575 is part of a set of standards that supports interoperability of autonomous EFC-systems. It
defines the EFC context data, their charge reports and their use of communication infrastructure.
The set of standards also supports short-range communication links in the context of autonomous
electronic fee collection (EFC) on-board equipment (OBE) to enable localization augmentation process.
The application interface is defined in ISO 13141.
Within the set of EFC standards, this document defines the process and tests for conformity evaluation
of OBE and roadside equipment (RSE) that comply with the requirements in ISO 13141.
This document is intended to
— assess OBU and RSE capabilities,
— assess OBU and RSE behaviour,
— serve as a guide for OBU and RSE conformance evaluation and type approval,
— achieve comparability between the results of the corresponding tests applied in different places at
different times, and
— facilitate communications between parties.
This document is based on
— ISO/TS 13141,
— the set of dedicated short-range communication (DSRC) standards defining the communication
stack, and
— ISO 9646.
This document is based on using the tree and tabular combined notation (TTCN) that is a standardized
language suitable for specification of test cases and steps for assessment of protocol and application
behaviour. The TTCN language is also supported by modern automated tools that accelerate software
design, implementation and testing.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.